Reviews Astm A213 Pipe

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Cross, 1/2\ Tube OD

  • Cross for connecting and branching four pipes.
  • Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
  • Operating temperatures range from -100 to 1000 degrees F.
  • Meets ASTM standards A213 and A269 for quality assurance.
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Nut, 1/2\ Tube OD

  • Nut for connecting to a compression tube fitting.
  • Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304.
  • Maximum operating temperature range of -100 to +1,000 degrees F.
  • Meets ASTM A213 and A269 standards for quality assurance.
Check Stock

Parker Hannifin VS269NTA-4-4 Brass Air Brake-NTA Male Elbow Fitting, 1/4\ Compression Tube x 1/4\ Male Thread

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
  • Operating temperatures range from -100 to 1000 degrees F.
  • Meets ASTM standards A213 and A269 for quality assurance.
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

Premium USA Made 6' Inch Outdoor Round Atrium Drain Grate Cover - Fits All 6' Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Landscape Pipe 6' (Black)

  • FIT : Fits All 6" Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Pipe 6".
  • PREMIUM QUALITY - manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. This grate is designed with large opening slots for maximum flow while still preventing large debris from entering the drainage system. Capable of withstanding pedestrian, bicycle and wheelchair traffic..
  • EASY INSTALL - Precision engineered and manufactured to attach directly to Sewer and Drain Pipe and Fittings, Triple Wall Pipe and Corrugated Pipe. Easy to use, installs in minutes and blends well with the landscape..
  • FITS MOST BRANDS - COMPATIBLE WITH NDS, DURA, ETC..
  • APPLICATION - Typical application would be for direct attachment to Drainage Pipe where a catch basin is not appropriate or feasible. Available in 3″, 4″ and 6″ diameters..
  • ADA compliant - recommended for pedestrians, bicycles, and wheelchair traffic.
  • EXACT FIT: 6” Sewer Pipe (ASTM D3034, SDR 35), 6” S and D Pipe (ASTM D2729), 6” Corrugated Pipe, 6” S and D Fittings (SDR 35), 6” Round Catch Basin..
Check Stock

3-1/2\ x 6 ft. Elastomeric Pipe Insulation, 1/2\ Wall

  • 003cb003ePrice For:003c/b003e Each 003cb003eTemp. Range003c/b003e: 0 Degrees to 850 Degrees F 003cb003eMaterial003c/b003e: Fiberglass 003cb003eLength003c/b003e: 3 ft. 003cb003eColor003c/b003e: white 003cb003eStandards003c/b003e: ASTM C547 Type 1, ASTM C585, ASTM C1136, NRC 1.36, ASTM C795, Mil-I-24244C, MEA Compliant 003cb003eFor Iron Pipe Size003c/b003e: 1/2" 003cb003eInsulation Type003c/b003e: Hinged with Self Sealing Lap 003cb003eApprox. K Value003c/b003e: 0.23 003cb003eItem003c/b003e: Pipe Insulation 003cb003eWall Thickness003c/b003e: 1/2" 003cb003eApprox. R Value003c/b003e: 2.2.
  • 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

Oatey 30246 PVC Regular Cement and 4-Ounce NSF Purple Primer Handy Pack

  • ALL-PURPOSE CEMENT AND PURPLE PRIMER HANDY PACK: Includes one 4 oz. can of all-purpose clear cement and one 4 oz. can of purple primer for PVC pipe....
  • REGULAR CLEAR CEMENT: Recommended for potable water, pressure pipe, conduit, and DWV applications, and it flows freely and sets up quickly at the....
  • INDUSTRIAL-GRADE PURPLE PRIMER: Recommended for use on CPVC/PVC pipe and fittings of all schedules and diameters, and it is for use in areas where....
  • AGGRESSIVE PRIMING: Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent....
  • COMPLIANCE: Both the cement and primer are certified to UL Greenguard Gold, NSF and UPC approved, exceed ASTM Standard D2564 and ASTM F 656, and....
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

3M Fire Barrier Sealant FD 150+, Red, 10.1 fl oz Cartridge, 12/case

  • Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115.
  • Fire resistive joint system tested up to 4 hours in accordance with ASTM E 1966 (UL 2079).
  • Continuous seal remains pliable and allows for typical pipe movement.
  • Water-based for easy installation, cleanup and disposaL.
Check Stock

Rustic State Industrial Pipe Wall Bracket Rust Oil Free 10 Inch Black Set of 2

  • PIPE Type: black pipe 3/4" x 5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application.
  • PIPE SPECS: black coated schedule 40, 150 PSI.
  • PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air.
  • HIGH QUALITY: durable pipe steel materials manufactured using advanced technology.
  • RATING APPROVALS: meets ASTM standards and NSI technical specification.
  • EXTRA PROTECTION: shipped with plastic end caps to prevent pipe thread damage for the duration of transport.
  • DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture, shelves and accessories..
Check Stock

Cleveland Tubing Perforated Corrugated Expandable Flexible Landscape Drain Pipe, 4-in. by 12-ft.

  • Pipe unfolds and expands from 15-inches to 12-feet.
  • Perforated pipe is for ground water drainage (French drains, dispersing water from flower beds) where soil is coarse.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.
Check Stock

SUPPLY GIANT OQCM2025-5 Nipple pipe, 2 in. x 2-1/2 in, Black, 5 Pack

  • PIPE NIPPLE TYPE: pipe nipple fitting male NPT (National Pipe Thread) thread made of superior coating steel for commercial use residential application and all your DIY projects. Black coated schedule 40, 150 PSI.
  • PIPE FUNCTION: nipple joins two pipes or extending length.
  • HIGH QUALITY: durable pipe steel material manufactured using advanced technology.
  • RATING APPROVAL: meets ASTM and ANSI standards.
  • DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture shelves and accessories.
Check Stock

Flex-Drain 51910 Flexible/Expandable Landscaping Drain Pipe, Perforated, 4-Inch by 12-Feet

  • Pipe unfolds and expands from 15-inches to 12-feet.
  • Perforated pipe is for ground water drainage (French drains, dispersing water from flower beds) where soil is coarse.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.
Check Stock