Reviews Assembled Standoffs

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

• The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
• GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
• Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
• Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....

3V 1Amp Power Adapter Supply 100-240 AC to DC 3Volt 1000mA 2.1mm X 5.5mm Plug 3V 1A AC/DC Power Supply Transformer

• The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
• GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
• Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
• Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....

Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit Hex Male-Female Brass Spacer Standoffs Laptop Screws for DIY Computer Build Electronic Projects Raspberry Pi Circuit Board etc.

• 【HIGH QUALITY】Packaged included 320pcs M3 motherboard standoffs and screws. The M3 standoff kit is very good value, which has a wide selection of standoffs and connectors.The M3 laptop screws kit has nice brass finish with quality threads.The motherboard standoffs fit nicely, thread cleanly and the variety in this m3 standoff kit is more than enough for all of the components in your DIY build..
• 【GOOD ASSORTMENT】The M3 standoff kit is a very nice assortment of brass standoffs and all neatly organized in a compartment box. All the threads in the M3 computer screws kit are correctly sized, clean, and burr free.The m3 standoff kit box holding all the motherboard screws pieces is a good bonus to keep all motherboard standoffs organized in their own compartment..
• 【EASY TO USE】The M3 standoff kit is a great kit with a lot of options. The M3 standoff kit are simple to work with, yet usable. The M3 motherboard standoffs and screws kit is easy to adjust the selected step or rise. The motherboard standoffs are easy to install and durable to use, too..
• 【MUTIPURPOSE】 The motherboard standoffs kits are versatile. If you are a DIY computer builder, a little M3 standoff kit box of these motherboard standoffs and screws is essential. The motherboard scre....

Electronics-Salon Pi Screw Terminal Block Breakout Module, for Raspberry Pi.

• Pi Terminal Block Breakout Module - for Raspberry Pi..
• The item has been soldered and assembled, with mounting screws, standoffs and labels..

CO-RODE 48pcs M.2 SSD Standoffs and Screws for Asus, Gigabyte, MSI Motherboards

• M.2 Standoffs Screws NVME SSD mounting screws for ASUS, MSI, Gigabyte motherboards.
• Two types of M.2 Standoffs Screws for ASUS motherboard(Silver and Black).
• M.2 Screws:Perfect for laptop M.2 2280 SSD screws.
• Ideal for universally computer laptop repair, also can use for electronics, computers, PC motherboard, DIY hobby etc.

HELIFOUNER 420 Pieces M2 M3 M4 Male Female Hex Brass Spacers Standoffs Screws Nuts Assortment Kit with a Tweezers

• 【Material】Made of durable brass material which have good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using..
• 【Sizes】 M2 M3 M4 brass female to female standoffs length is 5mm, 10mm, 15mm, 20mm.
• The screw size is M2 M3 M4, the thread pitch is 0.4mm, 0.5 mm, 0.7mm, total 420 pieces/30 sizes of the most commonly used spacers screws nuts in a plastic case, different size can satisfy your different needs..
• 【Design】Brass standoffs is a fastener used to create space between two objects, often to properly position them. In the world of electronic components and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears..
• 【Package Included】420 pieces 30 sizes in total, package in a durable transparent box with label. It is easy to distinguish the size of the product, you can choose the suitable one to meet all your needs..
• 【Wide Applications】The brass standoffs thread is deep and clear without burr. With the broad spectrum of length, thread, and girth, this collection of screws should be almost universal and cover most hardware DIY projects for desktop c....

4mm (M4) Rubber Spacers Standoff Washers (12 Pack) 4 x 15mm, 4 x 10mm, 4 x 5mm

• M2.5 Black Nylon Hex Spacers Standoffs/ Screws/ Nuts Assorted Kit.
• Total 240 Pieces Come With the Plastic Box.
• Screw Thread: M2.5/(2.5mm), Thread Pitch: 0.45mm.
• The Male-Female Standoffs Different length:6mm+6mm(15pcs).
• 20mm(15pcs).and Nylon Screws(60pcs)/Nuts(60pcs).
• The Nylon Standoffs Kit For FPV Quadcopter Building,Arduino,Raspberry-Pi or other projects.
• All Products are Made of Durable Nylon, Strong, anticorrosive..
• 100% new,Good Quality.Easy to install and durable to use.

UNO Screw Terminal Block Breakout Module with Aluminum Enclosure for UNO R3.

• UNO Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend UNO projects to industrial control....
• Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
• Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
• Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
• Packing list: 1x Terminal Block Board(assembled standoffs and screws), 1x Aluminum enclosure(top and bottom covers), 5x M3x4mm Flat head screws(for....

Jucoan 380PCS M3 Male Female Nylon Hex Spacer Standoffs Screws Nuts Assortment Kit Threaded Pillar PCB Motherboard (Black)

• Package includes 380 pcs M3 black nylon hex spacer motherboard standoffs kit with various specifications of hex spacers, screws, washers, and nuts to meet your different demand..
• All of those small standoffs and spacers are well packed and classified in different grids of plastic box for easy to use and store..
• Those M3 motherboard standoffs are made of high quality nylon, light weight and solid for long time use..
• With the features of non magnetic, thermal insulation and corrosion resistance, the nylon assortment kit is suitable for industries of communication, electroplating, medical device, office equipment, electronics, etc.
• This machine screw nut kit is easy to install and widely used in fixing PCB, drone, computer motherboard and other accessories..

StarTech.com 6-32 Brass Motherboard Standoffs for ATX Computer Case - 15 Pack (STANDOFF632)

450PC Computer Motherboard Standoffs Screws Kit, Replacement Computer Screws for Motherboard HDD Hard Drive 2.5' SSD Hard Drive PC Fan Graphics Chassis ATX Case Mounting, for PC DIY & Repair

• 450 PCS. Total 15 different computer screws with 450 pcs, offering a 99% fit in all types of computer motherboard screws for pc DIY installation & repair. You will get the whole necessary computer screws with this motherboard standoffs screw kit..
• Meet your DIY computer mounting or repair. This computer screws kit will works on: HDD hard drive, 2.5" SSD hard drive, gpu & cpu cooling fan, main motherboard, chassis/ pc cases, graphics cards, power supply, dvd & cd-rom or other parts! Will fit your pc mounting or repair with this motherboard standoffs and screws..
• High Quality Motherboard Screws & Standoffs. Made by high quality steel, brass, fiber paper, steel with nickel and black zinc plated which have better rust resistance and oxidation resistance. You can install or remove them time and time again without any worry about stripping a head or snapping a screw..
• Well Packaging. Each model of screws is placed inside a compartment and clearly labeled, making it easy for you to use and store at any time. The 450pcs pc computer screws kit contains a variety & color of motherboard screws to help you find the right one for the pc mounting & repair needs. It's a good choice for the professional computer repairman or a first-time builder/fixer..

uxcell Round Aluminum Standoff Column Spacer M3x70mm,for RC Airplane,FPV Quadcopter,CNC,Black,10pcs

• √ Size: M2 M3 M4 brass standoff female to female length is 5 mm, 10 mm, 15 mm, 20 mm.
• The screw is M2 M3 M4, the thread pitch is 0.4 mm, 0.5mm, 0.7mm..
• √ 420 Pieces brass standoff kit: our brass standoff kit come with hex spacers, screw, nut, standoff, applies to many area, appropriate to meet you different needs..
• √ Durable material and long use life: these standoffs are made of durable brass, there screws and nuts are made of stainless steel which strong, anticorrosive, compact and portable..
• √ Easy to install: Brass standoffs is a fastener used to create space between two objects, often to properly position them , the standoff kit is very useful small tools, they are very easy to install, and bring a lot of convenience to your life..
• √ Package includes: 420 pieces M2 M3 M4 standoffs, package in a durable transparent box with label. It is easy to distinguish the size of the product, all the parts are in the individual compartments..

Semi-Enclosed Enclosure Kit for Raspberry Pi BeagleBone Arduino UNO Mega

• This is a multi-purpose semi-enclosed enclosure kit, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ /....
• It can be assembled very flexibly as a semi-closed enclosure, or as a two-layer bracket, or if you buy multiple sets, it can be used as a Raspberry Pi....
• The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Arduino stack SHIELD module, or....
• The material of the lower cover and upper cover is 1.5mm thick aluminum plate, which is very strong, spacer/standoff and screws are nylon material..
• Packing list: 2x covers, 8x M4x40mm standoffs, 4x M4x10mm spacers, 4x M4x8mm screws, 16x M2.5x6mm screws, 8x M2.5x10mm spacers (for Arduino MKR module....