Reviews Arduino Pro Mini

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

ACEIRMC 6pcs ESP8266 D1 Mini WiFi Dev Board ESP-12 ESP-12F NodeMcu Mini Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino

  • This is D1 mini , it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE..
Check Stock

Hosyond 5Pcs D1 Mini NodeMcu ESP8266 ESP-12F Wireless WiFi Module Internet of Things Development Board Compatible with Arduino/WeMos

  • It is a mini NodeMcu Lua Wireless development board based on ESP-8266..
  • Compatible with Arduino IDE and WeMos D1 Mini..
  • 4M bytes, 5V 1A switching power supply onboard,1MB flash memory.
  • 11 digital input/output pins, all pins with interrupt/PWM/I2C/1-wire support (except D0).
  • 1 analog input (3.2V max input). Micro USB connection..
  • D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

AITRIP D1 Mini WiFi Dev Board,Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 6)

  • （pack of 6 ）This D1 mini module is a mini WIFI board based on ESP-8266EX..
  • Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in Compatible with Arduino IDE..
  • Support OTA on line.Compatible withArduino compatibility. Using Compatible with Arduino IDE for programming..
  • This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
Check Stock

ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module for WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs

  • This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, Compatible with WeMos D1 Mini..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB....
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

Arduino Nano [A000005]

  • The Arduino Nano is one of the smallest Arduino boards available on the market.
  • Tiny form factor, complete, and breadboard-friendly board based on the ATmega328.
  • Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.
Check Stock

Adafruit ATWINC1500 WiFi Breakout

  • Good when you want a lower-power and lower-voltage setup.
  • Same core chip in the Arduino UNO/Duemilanove/Mini/etc.
  • 95% of Arduino projects will work out of the box.
Check Stock

FTCBlock Protoshield V3 Prototype Expansion mega Shield Bread Board for Arduino Mega2560/1280 UNO

  • Latest uno proto shield prototype expansion board with 170 ties mini breadboard..
  • 170 ties mini breadboard based for arduino,compatible with UNO R3..
  • Components can be soldered directly on the board, or through the mini breadboard above..
  • Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype.
  • Full Compatible with Arduino Mega ATmega1280 / MEGA2560..
Check Stock

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

  • http://www.wch-ic.com/download/list.asp?id=127 (windows).
  • If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

HiLetgo 5pcs Mini ESP8266 ESP-12F Mini NodeMCU Lua 4M Bytes WiFi Module with Pin Headers

  • Arduino ompatibility. Using the Arduino IDE for programming.
  • 5V 1A switching power supply (switching power supply）onboard.
Check Stock

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • http://www.wch-ic.com/download/list.asp?id=127 (windows).
  • If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

GY-AS3935 Lighting Sensor Module SPI I2C MA5532-AE Lighting Strike Thunder Storm Distance Detector Breakout Board

  • Reference link: https://tinyurl(dot)com/AS3935-light-detector.
  • Video link: https://youtu(dot)be/oXqSIyaHR_I.
  • The splitter uses an inductor (antenna) designed specifically for this application, and the board is fully calibrated.This ensures that you can support low-level IC calibration without having to write a large back-end – focus on your end application!.
  • This sensor cannot drive an LCD display on it own It will need a microcontroller, like ESP8266/ESP32 or Arduino Pro Mini / Pro Micro 3.3V The Microcontroller will control the sensor and control the display as well..
  • What you will get is : 1 X GY-AS3935 Lightning Sensor.
Check Stock