Reviews Arduino Leonardo Micro Pinout

KEYESTUDIO 48 Sensors Modules Starter Kit for Arduino with LCD, 5v Relay, IR Receiver, LED Modules, Servo Motor, Temperture, Gas Sensor, Programming for Beginners Adults Learning

  • This electronic sensor kit contains 48 pieces most popular and mainstream sensors and modules, allow you to do a lot devices, robots and other interactive device with the best price. This kit Not contains arduino controller board..
  • Compatible with various micro-controllers and Raspberry Pi, such as mega 2560, r3 development board, pro micro, leonardo, etc. Note we only offer arduino instructions..
  • We provide detailed projects for each sensor based on development board, including wiring method, test code, etc. Download the arduino tutorial from wiki website..
  • This is high quality sensor kit with exquisite packaging. It's a perfect present for junior high and high school inventors, hackers, designers, and tinkerers of all levels..
  • The tutorial shows wiring for the Arduino and gives example code. All of this makes getting started with sensors quite easy. The professional support team is ready to answer any questions..
Check Stock

AITRIP 5 PCS Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header Compatible with arduino Leonardo Replace ATmega328 Pro Mini (5PCS)

  • On-Board Micro-USB connector for programming.
  • Pay attention to : 1.When you open the for Arduino IDE software, could you please go to the tool and choose the board "for Arduino Leonardo".
  • 2: The acceptable voltage range is 6 to 9 V..
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega + 2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

DollaTek GY-30 BH1750FVI Digital Light Intensity Sensor Module I2C Raspberry Pi

  • ANMBEST Pulsesensor Pulse Heart Rate Sensor is a plug-and-play heart-rate sensor for Arduino and Arduino compatibles..
  • Pulse Sensor adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get reliable pulse readings. The Pulse Sensor works with either a 3V or 5V Arduino..
  • The sensor can be worn on the finger or earlobe..
  • Supported development boards are Uno R3, mega2560, leonardo, 51 series, msp430 series, KL25Z. s..
  • NOTE: This product is NOT a professional medical device and should not be used to diagnose or treat medical conditions..
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega+2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)

  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor.
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages.
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging.
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit.
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions.
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Micro SD SPI or SDIO Card Breakout Board - 3V ONLY! Adafruit 4682

  • -165 dBm sensitivity, 10 Hz updates, 66 channels.
  • Low power module - only 20mA current draw, half of most GPS's.
  • For use with Arduino Uno/Duemilanove/Diecimila/Leonardo.
Check Stock

Vilros Complete Accessory Bundle for Raspberry Pi 400

  • This is a add-on accessory Bundle for The Raspberry PI 400 Official Kit -This Bundle does NOT include a Raspberry Pi 400 board.
  • Includes: Case, Wireless & Bluetooth Mouse, Raspberry Pi 400 Compatible Power Supply, 32GB Class 10 Micro SD card ,HDMI to Micro HDMI Cable, Keyboard Protector , Mousepad , Pinout Guide Sticker.
Check Stock

Micro USB Cable for Arduino BBC Micro Bit to USB A Data Sync & Charging Cable Power Supply Cord Cable

  • BBC Micro Bit to USB A Data Sync & Charging Cable Power Supply Cord..
  • Connect Micro Bit Mainboard to PC Computer..
  • Micro USB Cable for Arduino,BBC Micro Bit..
  • Ideal for all Micro interface devices such as phone and camera charging, also for electronics kits such as Arduino etc.
Check Stock