Reviews Arduino Bluetooth Mpplayer

Bluetooth Thermometer

  • Read temperature from a bluetooth enabled development board (Arduino, Raspberry Pi , ...).
  • Read schematics for an Arduino development board.
  • Write simple Arduino code to send the data.
Check Stock

HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

HiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

Arduino | Step by Step: The Ultimate Beginner’s Guide with Basics on Hardware, Software, Programming & DIY Projects (Arduino | Introduction and Projects Book 1)

  • Advancing the development of robotics technology w/ Earth's 2nd biggest & most advanced starter kit for Arduino. 65+ pieces w/ FIVE main boards: 100% Arduino-compatible Uno R3, Mega 2560, Nano V3, ESP32 WiFi+Bluetooth and ESP8266 NodeMCU development platforms.
  • Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time Clock, Impact Switch, 3-Axis Accelerometer, LCD, Relay, Servo and Stepper Motor - suitable for beginner or advanced users.
  • Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers and the W5100 Ethernet Shield.
  • All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and videos to help you learn to program all the parts and get started quickly.
  • Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable orga....
Check Stock

KEYESTUDIO Multi-Purpose Shield V1 with Buzzer LED Temp Light IR Receiver for Arduino Controller R3 and MEGA2560

  • ...h to Arduino after assembly and get a lot of fun of making..
  • 【Automatically Drive/Motion Control】-Keyestudio robot kit has many excellent functions, detecting, avoiding and following obstacles.
  • using 8X16 LED panel to display the movement status. You can also use infrared remote control and Bluetooth APP to control it (support iOS and Android).Have fun in the process of learning Arduino..
  • 【Simple Assembly】-With a detailed tutorial for assembling it，and all parts are named and organization. Four cartoon animal heads have been added to the kit so that you can install them on the ultrasound module,assemble with your child, it will be a wonderful experience!.
  • 【Project-Based Tutorials for Coding】-This programmable robot supports Arduino IDE.15 detailed online projects, from simple to complex,easy to learn coding, robotics and electronics through games. Stimulate your creativity through hands-on experience..
  • 【KEYESTUDIO Technical Support】About this stem starter kit,we have a complete graphic description,please search for "KEYESTUDIO ks0428" in Google Chrome, you will get a detailed English User Manual.If there are any problems during use, please feel free to contact us and we will respond quickly to technical support..
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

Arduino Portenta H7 [ABX00042]

  • Two processors that can run tasks in parallel with both cores communicating with one another. Each core can execute Arduino, mbedOS, micropython, and TensorFlow Lite code..
  • Comes in the Arduino MKR form factor but includes two extra 80-pin high density connectors. Extend your Portenta H7 to physical interfaces like Ethernet connectors, CAN bus peripherals, extra GPIO pins, SD card, etc..
  • Onboard WiFi and Bluetooth connectivity up to 65 Mbps transfer rate (using an external antenna)..
  • Perfect for high-end industrial machinery, laboratory equipment, computer vision, PLCs, robotics controllers, or even dedicated stationary computers..
  • Main features: industrial temperature rates, 8MB SDRAM, 16MB NOR Flash, DisplayPort output, USBC connector, cryptochip for secure data transactions..
Check Stock

LED Controller

  • Basic tutorial to for interfacing bluetooth with arduino.
Check Stock

HiLetgo 2pcs Gamepad Joystick Shield for Arduino Expansion Board Analog Keyboard and Mouse Function

  • The "Nokia 5110 LCD" interface has been added.
  • The bluetooth module interface has been added, Convenient Bluetooth wireless serial communication..
  • The "I2C" communication interface has been added Compatible with Arduino UNO.
Check Stock

Robot Car Crawler Tank Treads Tracks with Gear for Robot Tank DIY (Not includ Idler Wheels)

  • 【Metal Panel】: This tank chassis is designed for the metal panel with 2 plastic track and 4 wheels. But the price is not valuable. It is very suitable for the student for the arduino/raspberry pie/microbit learning. In the manual, we just provide the referred arduino code with wifi, bluetooth control mode..
  • 【What You Get】: You will get a complete TP101 tank car chassis kit, which includes 1pcs * metal frame, 2pcs * plastic driven wheels, 2pcs * plastic driving wheels, and screw kit, together with a battery box case. If you have any problem, please don’t hesitate to contact us. We will reply you within 24h..
Check Stock

ACEIRMC ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE (3pcs)

  • 1.ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
  • 2.Ultra-Low power consumption, works perfectly with the for Arduino IDE.
  • 3.SupportThree Modes: AP, STA, and AP+STA.
  • 5.ESP32 is a safe, reliable, and scalable to a variety of applications.
Check Stock

ZSUPRE Sunset Projection Lamp Sun Light 16 Multiple Colors Changing with Remote&APP Controlled 360° Rotation,Rainbow Sunrise Led Atmosphere Night Light Projector for Living Bedroom Decor Aesthetic

  • Basic tutorial to for interfacing bluetooth with arduino.
Check Stock

Arducam IoTai ESP32 CAM WiFi Bluetooth for Arduino UNO, PSRAM Development Board with Camera Module OV2640

  • Arducam IoTai is based on ESP-32S module, uses onboard 4MByte PSRAM and 2MP OV2640 camera module, which makes it possible to capture and process the image..
  • Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, supports both Arduino IDE and ESP-IDF software development tools, and keeps the same form of factors and pin-out as the standard Arduino UNO R3 board..
  • Powered by micro USB or lithium battery, supports lithium battery recharging..
  • The onboard camera interface can directly connect most of the parallel port cameras like OV2640, OV7670, OV7725 and etc. This board can also work with Arducam multi camera adapter (ASIN: B07TYL36MC), which makes this board can connect multiple SPI cameras (up to 4)..
  • Supports face detection and recognition in low frame rate, supports three low power wake-up modes, very suitable for home security, industrial wireless control and other IoT applications..
Check Stock