Reviews Api Pipe Round Steel Tube

4 Pcs 50mm (2 Inch) Round Plastic Plug ,Round Tubing Black Plastic Plug，Pipe Tubing End Cap for Round Tube Furniture Finishing Plug

  • The 2" round plastic plugs only fit 50mm (2 inch) outside diamefer round tubing or pipe. (not inside hole diameters ,not inside hole diameters) Designed to fit inside hole diameters from 1.81" to 1.93".with a wall thickness 0.020" - 0.060".（Refer the Size Picture）Select the plug size that matches the outer diameter of the tube, note that the outer diameter of the tube must match. there are certain errors in the size of round pipes and pipe plugs, which is a normal phenomenon, please check the size before buying..
  • Material: 50mm (2 Inch) round tube end cap plug Made of high-quality plastic, durable and wear-resistant. Waterproof and compressive wear proof..
  • Uses:black plastic cap Provides long lasting protection， great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliderschair leg protectors, patio furniture inserts, and much more..
  • The 2 Inch round threaded inner plug can be used as a durable solution for home or outdoor projects, including replacement of fence/door railing covers, trailer frame ends, rod tube rod caps, wrought iron steel decorative plugs or any round opening. Not easy to deform, firmer, not easy to fall off, easy to install..
  • We believe that our round Tubing Post ....
Check Stock

VEVOR Pipe Tubing Notcher 60 Degree Tubing and Pipe Notcher Hole Saw Up to 2\ Round Tubing Tube Notcher Tool Aluminium Frame Tube Notcher w/Instructions for Cutting Holes Through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Simple Operation: Ergonomic design and built-in protractor make it easy to use. Max capacity up to 2-1/8" round tube, adopts less than 2-3/4" threaded arbor hole saws..
  • Wide Application: The mandrel is compatible with most hole saws of other manufacturers..
Check Stock

VEVOR Tube Notcher Kit 60 Degree Pipe Tubing Notcher w/13 Pc Bi-Metal Hole Saw 3/4\ -2-1/2\ with Case Tubing and Pipe Notcher 2 Drills Tube Notcher Tool for cutting holes through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Complete Set: Includes a pipe notcher, 10 hole saws: 3/4"-2-1/2" for needs in different situations, two drills and a spare pilot drills for replacement, a large mandrel, a small mandrel and a tool case for easy storage (together with a hex key).
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

FiveEyes 1 1/2 1.5

  • ✔【Size】 – The package includes 10pcs 1 1/2 1.5″ round tube plastic plug, the end cap fits 1 1/2″ (1.5 inch) OD round tubing and wall thickness of 0.039″ – 0.118″. NOTE: When you buy before, please check size of the plastic plug is suitable for your tubing..
  • ✔【Ribs Design】 – Ribs Design can provide a sure grip inside the tube. Thick base of the tube plug is impact and abrasion resistant..
  • ✔【Reduce Friction】 – The black plastic tube plug cap works great for preventing friction on wood floor, protect the furniture when moving the furniture, and reduce the noise to protect the sleep quality..
  • ✔【Wide Application】 – The tubing end cap cover is widely used to chair legs, bench feet, table legs, bar stool foot, and fences/fencing railing posts, furniture end covers, fitness equipment end covers, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any round opening..
  • ✔【Easy to Install】 – The round tubing plug is lined with ribs, which fits tightly, is easy to install. They serve as a long-lasting solution for many household or outdoor projects..
Check Stock

VEVOR Tube Notcher Kit 60 Degree Pipe Tubing Notcher w/ 9 Pc Bi-Metal Hole Saw 3/4\ -2-1/4\ with Case Tubing and Pipe Notcher 2 Drills Tube Notcher Tool for cutting holes through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Complete Set: Includes a pipe notcher, 6 hole saws: 3/4"-2-1/4" for needs in different situations, two drills and a spare pilot drills for replacement, a large mandrel, a small mandrel and a tool case for easy storage (together with a hex key).
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

VEVOR Tube Notcher Kit 60 Degree Pipe Tubing Notcher w/18 Pc Bi-Metal Hole Saw 3/4\ -3-1/4\ with Case Tubing and Pipe Notcher 4 Drills Tube Notcher Tool for cutting holes through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Complete Set: Includes a pipe notcher, 13 hole saws: 3/4"-3-1/4" for needs in different situations, two drills and two spare pilot drills for replacement, a large mandrel, a small mandrel with medium adapter, and a tool case for easy storage (together with a hex key).
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

ARES 48001 – External Rotary Deburring & Chamfer Tool (13-36mm) – 3/8-Inch Shank for Use with Drill or Hex Driver - Clean and Repair Threaded Fasteners, Studs, and Bolts

  • Simplifies the repair process. The internal deburring tool with 5 flute bit design allows it drilling smoothly in metals, and it can even drill counter sinks..
  • 【Wide Application】Effective on metal, stainless steel, mild steel, copper, brass, fiberglass Outer chamfer tool works on round stock bar stock, threaded rod, screws etc. Inner chamfer tool works on steel pipe, iron pipe, stainless steel pipe, copper tube, aluminum tube, hard plastic tube..
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

DBM IMPORTS Manual Pipe Tube Roller Bender Rolling Tubing Round Flat Square Bending Steel Hand Operate

  • Round Pipe Capacity: Max. 1.18" x 0.04" (30 x 1mm).
  • Flat Steel Capacity: Max. 1.5" x 0.40" (40 x 10mm).
  • Square Steel Capacity: Max. 1.57" x 1.57" x 0.04" (40 x 40 x 1mm).
  • Unit Dim L x W x H (in): 21 x 15 x 16-1/2 *Estimated*.
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

VEVOR Pipe Notcher Punch and Press Tool for 0-50 Degree Tube Notcher Tool Notches 3/4\-3\ Round Tubing Bore Hole Pipe Knotcher Aluminium Frame Tubing Notcher for Cutting Holes Through Metal, Wood.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. Hole saw not included..
  • Sturdy Construction: The tubing and pipe notcher is made of premium A3 low-carbon steel, make the notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-50 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Simple Operation: Ergonomic design and built-in protractor make it easy to use. The pipe notcher tool can work with a 1/2" drill for grooving 3/4" to 3" pipe, vise, or benchtop mount..
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock