Reviews Anti vibration Boring Bars

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories

  • This tool set is made of high quality material, good wear resistance, and durable in use.
  • The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check Stock

iCarbide R8 Boring Head and 1/2 Shank Boring Bar 6pcs Set Inserts Included 1/2 - 4

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock

4 PC 1/2\ Shank Indexable Boring Bar Set Free TCMT Insert

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

  • 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
  • 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
  • 【Specification】Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
  • 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
  • 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

Rox Speed FX Elite Series Anti-Vibration Handlebar Riser (2\ / 7/8\ - 1-1/8) (Natural)

  • Independent left and right risers adapt to any handlebar clamp width and herefore virtually any machine with 7/8in. bar clamps.
  • Anti-Vibe design reduces vibration in bars.
  • Provides a slight shock damping effect to help protect rider and machine.
  • Dual rotation points allow rider to select optimum riding position for comfort and control.
  • Rox Elite Series risers allow you to clamp 7/8in. or 11/8in. taper bars.
Check Stock

Autekcomma Heavy Duty Roof Rack Crossbars Replacement for 2007-2023 Toyota 4Runner ,Anti-Corrosion ,Aircraft Aluminum Black Matte with Anti-Theft Locks . (ONLY FIT Original EXISTING Side Rail)

  • PROTECT YOUR RIDE：With built-in soft rubber pad , no scratches to your car roof rail.
  • SECURE YOUR CARGO：cross bars comes with anti-theft ,each bar has lock & key ,secure your cargo during your trip.
  • HEAVY-DUTY CROSSBAR：Die-cast metal Clamp+2mm thickness aluminum structure ,fit perfectly and no vibration during usage .Max Loading up to 260 lb.
  • ADJUSTABLE & CONVENIENCE ：Easy for installation and remove . Adjustable cross bars allow MAX 3 inches extension between your 2 roof rails.
  • LOW WIND RESISTANCE & NOISE & ANTI-CORROSION ：2007-2023 Toyota 4Runner roof rack cross bars made of aircraft aluminum ,black matte powder finishing giving no corrosion for life time, dynamic design for lower the wind resistance & noise during driving.
Check Stock

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

Max Loading 260lb Heavy Duty Lockable Roof Rack Cross Bars Replacement for Forester 2014-2022/ Crosstrek 2013-2017/Impreza 2012-2019 Black Matte with Anti-Theft Locks (ONLY FIT Factory Side Rails)

  • PROTECT YOUR RIDE：With built-in soft rubber pad , no scratches to your car roof rail.
  • SECURE YOUR CARGO：cross bars comes with anti-theft ,each bar has lock & key ,secure your cargo during your trip.
  • HEAVY-DUTY CROSSBAR：Die-cast metal Clamp+2mm thickness aluminum structure ,fit perfectly and no vibration during usage .Max Loading up to 260 lb.
  • ADJUSTABLE & CONVENIENCE ：Easy for installation and remove . Adjustable cross bars allow MAX 3 inches extension between your 2 roof rails.
  • LOW WIND RESISTANCE & NOISE & ANTI-CORROSION ：This Replacement for Forester 2014-2022/ Crosstrek 2013-2020/Impreza 2012-2021 roof rack cross bars made of aircraft aluminum ,black matte powder finishing giving no corrosion for life time, dynamic design for lower the wind resistance & noise during driving.
  • WARRANTY SERVICE: Please contact seller via E-mail for any warranty or qualiity issues .Seller will response within 24 hours..
Check Stock

Pro Taper 024859 Pillow Top ATV Handlebar Grips Black/Gray

  • Vibrasonix pillow top eliminates vibration and cushions impact.
  • Tacky gel-like surface compound is perfect for off-road riders.
  • Inner core compound perfects the bonding interface with bars.
  • ANTI-Rip Tip uses denser compound to increase life of the grip.
  • Designed to self-clean and shed mud away from outer surface.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

7/8 Universal Grips for Taper Dirt Pit Bike Blue one pair

  • 【Fitment】 Universal Motorcycle Handlebar Grips Fit for all 7/8" Left & 1" Right Grips.Left inner diameter: 22mm Right Internal Diameter: 24mm.
  • 【Material】 Non-slip Rubber. The Rubber Hand Grip Bar is durable,corrosion resistant..
  • 【Package Included】 A Set of 2 Handlebar Grips ：(7/8" Left Grip & 1" Right Grip).
  • 【Function】 Used by Professional racer worldwide, Perfectly compatible and interchangeable with the original parts. Designed toallow wase of repositioning hands grips. Tacky gel-like suface compound is prefect for motocross..
  • Full Diamond Pattern Solf Traction Top mazimizes grips and reduice vibration, Comfort grip feeling, anti-slip design. Relieve your fatigue and hands.Perfect Replacement for OEM. Inner core compound perfects the bonding interface with bars. Combining great style and comfort, Providing a soft, non-slip surface that dampens operating vibration..
Check Stock