Reviews Anti rotation Tool Holder

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Bosch GSR12V-140FCB22 Cordless Electric Screwdriver 12V Kit - 5-In-1 Multi-Head Power Drill Set

  • VERSATILE: The tool's Flexi Click 5-in-1 design delivers outstanding versatility in a compact, high-quality drill/driver. The kit includes a locking bit holder, a keyless chuck, an offset angle and a right angle to attach to the tool with the One-Click interface.
  • CONVENIENT: The included keyless chuck attachment provides locked-in drilling for difficult materials. An LED light illuminates dark work areas effectively and afterglow function keeps the light on for 10 seconds after the tool is off.
  • SECURE: The kit's locking bit holder attachment locks hex bits for security during high-torque driving or drilling.
  • ADJUSTABLE: The provided right angle attachment is designed for tight work spaces and works with the other three adapters. It rotates to 16 positions without removing from tool.
  • PRECISION: The offset angle attachment offers precise screwdriving very close to edges.
  • rotates to 16 positions without removing from tool. The kit also includes two 12V Max Lithium-ion batteries, a 12V Max Fast charger and a carrying bagDescriptionThe Bosch 12-Volt MAX Flexiclick 5-In-1 Drill/Driver System is designed for professionals who want a high-quality tool that redefines their limits to get the tough jobs done. This robust drill/driver delivers the performance you e....
Check Stock

Maxmartt 5pcs ISO30 Tool Holder Clamp Cradle Claw Set CNC Machines Automatic Tool Changer

  • tool holder 100% brand new and high quality..
  • cnc tool holder Designed for any type of ISO30 tool holder and automatic tool change system..
  • iso30 tool holder clip Professional manufacturing, perfect match with the tool holder..
  • iso30 tool holder clamp Made of high quality PVC material, wear resistant, heat resistant..
  • clamp tool holder Stable performance, anti-aging, acid and alkali resistant..
Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

  • Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
  • Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
  • Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
  • Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..
Check Stock

Lazy Bracket - Universal Hanging on Neck Lazy Phone Holder DIY Free Rotating Stand on Table Smart Multiple Functions Mobile Phone Mount Stand(Black)

  • Smart Design - Wide compatability, suitable for phone or tablet which around 4.7''-7.6''. The lazy phone holder can in accordance with their own ideas furnishings shape,rotation. Please note that the total thick of phone and case should within 0.55"/1.4cm , if your phone case too thick , you need to take off to avoid your phone popping out.
  • Suitable For Ergonomics - This lazy hang neck phone support,360 degree rotation flexible,give you any comfortable angle,also our eyes keep an appropriate distance to protect our vision.
  • Portable Size - Easy to be bent into any shape you want, easy to carry( please note that the phone holder sold by folding shape).
  • Sturdy holder - Made of over 70% aluminium magnesium alloy, stay stable, anti-skid shockproof breathable foam,your neck will feel comfortable,especially designed for ergonomic.
  • Practical Phone Stand - Used on the table, the bed, the floor, the car, hands, neck and other parts can be lightly put stability,very practical smart phone tool.
Check Stock

Matte Black Paper Towel Holder,Under Kitchen Cabinet Towel Paper Rack,Wall Mounted Round SUS304 Stainless Steel Dispenser for Bathroom Kitchen Tissue Towel Roll,11 inch

  • ✪Surface FINISH:Matte Black stainless steel finish,tylish and exquisite matte process make the bathroom holders look fashion and feel comfortable.Can build to resist daily scratches, corrosions, and tarnishing.ONLY clean with a soft, damp cloth gently..
  • ✪[SUPER EASY INSTALLTION]: The installation of kitchen paper towel holder will not exhaust you or require any craftsman skills and it can be easily completed because we provide all installation hardware ,detailed installtion manual, installation tool (Allan Wrench) .This paper towel holder are very suitable for installation in your kitchen, toilet, bathroom, living room etc..
  • ✪ROTATE PROOF:Wall mounted Anti-Rotation and Concealed screws designed, stay horizontal direction all the time..
  • Anti-Slip Design: Open-ended roll arm allows you to easily change paper towel rolls. Besides, this paper towel rack has a round end cap design, preventing the paper towel from slipping off..
  • ✪SIZE REFERENCE:13.22 inch(L) x 4.13 inch(W) x 1.96 inch(D) / 33.6 cm(L) x 10.5 cm(W) x 5 cm(D) Screw Length: 1.34" (34mm).If you have any product quality problems, please feel free to contact us on Amazon and please note that we provide 12 months warranty and will free-replacement..
Check Stock

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

EasyTime Watch Repair Kit- Professional Watch Battery Replacement Tool Kit, Suitable for Watch Back Removal with Watch Back Remover Tools, including Watch Opener, Adjustable case opener

  • ⌚ Complete watch opener tool: EasyTime watch tool kit, including adjustable case opener, 2 kinds of case opening knives, 2 kinds of screwdriver bits, ESD tweezers, cleaning cloth and case holder. It can be used for battery replacement, gasket replacement, movement replacement, cleaning, etc..
  • ⌚ Multi-function case opener: The adjustable case opener can be adjusted to 58 mm, which is used for rotating watch back covers with multiple grooves. In addition, Phillips screwdriver (1.5, 1.8mm), Feathead (1.0, 1.2, 1.5mm), screwdriver are used for screw-fixed watch cover and internal movement removal, prying knife is used for a snapback watch case..
  • ⌚ High-quality manufacturing and strict quality inspection: All metal tools are made of high-quality alloy materials and have been specially treated by the overall high-temperature quenching process. Each tool has undergone quality testing to ensure that each tool is not easily damaged and can be used for a long time..
  • ⌚ Fully equipped: This watch kit is equipped with anti-static tweezers and an adjustable case holder. The holder can place watches of different sizes, protect your hands and the case from scratches, and help you fix the watch more easily. The tweezers can easily pick up the battery and mo....
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

Car Seat Organizer Cup Drink Holders,Multifunctional Gap Filler Storage Box,Insert Organization Helps Reduce Distracted Driving&Holds phone Mount Mug Bottle Cellphones Coasters Wallet Cards (Black)

  • Small size and large capacity: the 2 in 1 multifunctional car cup holder is small but the upper cup holder can be retracted, so can adjust the control area to provide sufficient capacity to accommodate up to 4 normal cups, enough to meet your daily needs.
  • Flexible rotation: the upper cup holder base can be flexibly rotated 360 degrees, and the base can be adjusted to rotate, they are equipped with two cup holder storage parts, so can move and adjust the position according to the body space, convenient for to store drinks.
  • Versatile usages: the expandable adapter can only be applied to place the cup holder of beverage or water cup, but also suitable for storing mobile phones, glasses, coins, keys, wallets and other items.
  • Note: can close the cup holder when in use to keep the vehicle clean and save space.
  • Warmhearted car accessories: the adjustable automotive cup holders are equipped with 2 cup pads, which can be placed under the cup to increase friction and provide ideal anti-skid effect so that your beverage cup be more stable and easy to overflow when driving.
  • Package content: receive 1 piece of automobile cup holder and 2 anti-skid pads, all made of quality material, matched with delicate workmanship, which can keep the cup clean and enough to meet yo....
Check Stock

uxcell Indexable CNC Lathe Turning Tool Holder 93°DVJNR2020K16 3/4 Shank Carbon Steel Carbide Turning Tool Holder for Turning Grooving Threading

  • [Specification] - Cutting Angle: 93°, Cutting Direction: Right, Material: High Steel, Model: DVJNR2020K16, Holder Width: 20mm / 0.79inch, Holder Thickness: 20mm / 0.79inch, Total Length: 125mm / 4.92inch, Available Inserts: VNMG16 Inserts.
  • [Durable to Use] - The material of the turning tool holder is Carbon Steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance..
  • [Finish] - Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size for easy identification of the tool holder..
  • [Wide Range of Applications] - The boring bar is suitable for cutting step surface processing and other processing..
  • [Package Content] - You will receive 1pc indexable lathe turning tool holder(carbide insert not included) and 1pc wrench..
Check Stock

POBOMVOM Car Cup Holder Expander Tray New Version Multifunctional Automotive Cup Attachable Tray with 360°Rotation Detachable Tray Table Adjustable Base, Adapt 16-32oz Cup/Bottles/Drink

  • 【✅Car Cup Holder with Tray】The car cup holder extender cup holder tray expands the food table while placing water cups. 360-degree stable rotation, you can put food, snacks, keys, mobile phone, wallets, credit cards, etc. With a non-slip rubber pad, items on the tray will not move around or make any noise at all..
  • 【✅ Adjustable Base & Non-slip】The adjustable base expands from 2.36’’ to 3.54’’, making sure that the base is firmly installed on various car cup holders and will not fall. Installs easily by rotating adjustment dial, rotating clockwise to expand, rotate counterclockwise to restore, Anti-slip mat design prevents the items from sliding and falling..
  • 【✅ABS Plastic】This multifunctional car cup holder food tray is made of ABS plastic, is sturdy and durable, load-bearing 20lbs weight. the tray of the car accessories measures approx.9.06 x 5.71 inches, and the upper cup holder is approx. 2.91 inches in diameter and the lower one is about 2.36 inches in diameter, which can hold your cups in different sizes easily..
  • 【✅Quick Installation】Steps1, Insert the tray into the upper cup holder until it clicks into place. (Squeeze the outward bottom buckle to put out for taking the tray off).Steps2, place the cup holder in the p....
Check Stock