TRANSTAR 6131 Gray 2K Epoxy Primer/Sealer - 1 Gallon
- RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
- The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
- It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
- Can be applied directly over surface rust.
- 1L covers approximately 60 sq feet at 3 MIL.
- Salt spray resistance test completed at 003e1000 hours according to ASTM B117 at an independent laboratory.
Check StockMotorex 195282 Chain Lube Adventure
- Sea-Doo XP-S Anti-Corrosive Lubricant 779166 NOTE: Ski-Doo recently changed this product from a 12oz to 14oz can.
- This listing is for two (2) 14oz. spray cans of SeaDoo OEM XP-S Anti-Corrosive Lubricant This product has been superseded with 779166. The new can is black with yellow and white writing and contains 14oz instead of 12oz..
- A multi-purpose lubricant that protects against rust and disperses water.
- Comes in a spray can that works even when turned upside down.
Check StockSAMURAI 2-Part Spray Paint Epoxy Primer for Car Surfacer (Primer Grey, Pack of 1 Can)
- 2K high performance primer aerosol to further extend the protective and anti-corrosive properties of RAPTOR.
- Advanced resin technology to improve adhesion to bare metal and most other prepared surfaces.
- Contains a blend of anti-corrosive additives to inhibit rust and corrosion.
- Easy and convenient - activate using the valve on base.
Check StockALEKO Inflatable Boats Heavy Duty Raft Fishing Boat Dinghy 320 Inflatable Deck Black
- ALEKO 10.5 Ft Inflatable Boat with Air Floors in Black.
- Boat Material: 0.9mm reinforced polyester and anti-corrosive PVC / Floor: Air mat floor with interlocking polyester - as durable and rigid as wood....
- Max Load: 990 pounds / Max Persons: 4 people / Boat Net Weight: 112 pounds / Motor: Can accommodate up to 110 pounds.
Check StockEBIKELING 7 Speed Freewheel - 14-28 Bike Sprocket
- Made of high quality metal, anti-corrosive, good heat resistance, do not worry about the long-term use of friction heat, affecting its life. -Easy to maintain and rarely get grubbed up on the inside..
- This freewheel characterized by smooth rotation without much noise, high precision internal thread, ensure close connection with bicycle hub, smooth operation..
- It’s made using hardened steel material which makes it one of the most durable, long-lasting freewheels for multi speed bikes on the market. It is also compatible with electric bicycles..
- 14-28 Teeth 7 Speed freewheel - 13-28 Teeth 8 Speed freewheel.
Check StockThinvik Bike Pedal Extenders for 9/16 inch Bike Pedals,Chrome-Molybdenum Steel Bicycle Pedal Extensions,Extended Pedal Spacer for MTB BMX Road Bicycle - Extended 20mm/ 0.79in
- 【Injury Preventation】Broaden stance width for cyclists needing help with knees-out, excessive toes-out, extra wide feet, or wide hips to avoid injury..
- 【Anti-Rust&Corrosive】Made of high-quality chrome-molybdenum steel, waterproof, anti-rust, anti-corrosive and has a long service life..
- 【Extended 20mm 】The bicycle pedal shaft core is extended by 20 mm, providing more foot clearance and allowing you to enjoy a more comfortable riding..
- 【Easy Installation】Marked by L and R tag, easy to identify..
Check StockBeduan Pneumatic Tubing Pipe 5/16
- Wide range for working temperature and pressure.
- Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
- Tubing Pipe Features: Excellent flexibility, Small bending radius.
- Excellent chemical properties, Minimal pressure loss.
- PU Tubing Pipe Material: PU( Poly Urethane ).
- PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock
White Epoxy Undercoat – Epoxy Paint and Primer Mix for Coating MDF, Plywood, and Porous Materials! Great for DIY Countertop Epoxy Kits! 1 Quart, 32 Fl Oz (Stone Coat Countertops)
- Custom Shop – KEP Series Anti-Corrosive Epoxy Primer / Sealer is a 1 to 1 Mix Ratio high performance primer specifically designed to be used DTM (Direct to Metal). KEP Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat. Body Fillers and most properly prepared Rigid Plastics and sanded OEM Finishes..
- KEP Epoxy Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion. It also offers excellent salt spray resistance and is a fast dry product..
- Custom Shop – KEP Series Epoxy Primer is great as a DTM primer but also can be used as an excellent sealer for all single stage Urethane and Basecoat Clearcoat. If used as a sealer add 1/2 part of XR70 or UR70 reducer, topcoat or basecoat can be applied in 30 minutes. Using KEP allows for excellent topcoat gloss holdout..
- Available in Gray, Black and White in 1 quart kits, 2 quart kits, gallon kits and 2 gallon kits. Great for Automotive and Industrial applications. KEP is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
Check Stock
Custom Shop Premium Black Self Etching Primer, 1 Quart - Ready to Spray Paint, Excellent Adhesion to Bare Metal, Steel, Aluminum, Fiberglass - Use on Automotive Car Parts, OEM Industrial Coating
- Custom Shop – KEP Series Anti-Corrosive Epoxy Primer / Sealer is a 1 to 1 Mix Ratio high performance primer specifically designed to be used DTM (Direct to Metal). KEP Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat. Body Fillers and most properly prepared Rigid Plastics and sanded OEM Finishes..
- KEP Epoxy Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion. It also offers excellent salt spray resistance and is a fast dry product..
- Custom Shop – KEP Series Epoxy Primer is great as a DTM primer but also can be used as an excellent sealer for all single stage Urethane and Basecoat Clearcoat. If used as a sealer add 1/2 part of XR70 or UR70 reducer, topcoat or basecoat can be applied in 30 minutes. Using KEP allows for excellent topcoat gloss holdout..
- Available in Gray, Black and White in 1 quart kits, 2 quart kits, gallon kits and 2 gallon kits. Great for Automotive and Industrial applications. KEP is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
Check Stock
Centric 120.44146 Premium Disc Brake Rotor - Fits Select Lexus, Pontiac, Scion and Toyota Vehicles
- PREMIUM BRAKE ROTOR: Premium e-coated rotor with double disc ground friction surface for optimal performance, balance and quieter operation of daily commuter vehicles.
- UNIFORM HEAT DISTRIBUTION: Symmetric split core casting and vane design helps dissipate heat more efficiently than standard side cast rotors for stronger, safer stopping power.
- ANTI-CORROSIVE E-COATING: Electrostatically applied anti-corrosive black e-coat protects much better than competitors spray paint and withstands 400 hours of salt water exposure without rusting.
- OE REPLACEMENT PART: Original Equipment direct replacement rotor offers same specifications and fit as stock factory rotors with added durability and service reliability.
- VEHICLE FIT: 2006 - 2017 Toyota RAV4, 2007 - 2017 Lexus ES350, 2007 - 2017 Toyota Camry, 2008 - 2016 Toyota Avalon, 2009 - 2010 Pontiac Vibe, 2009 - 2014 Toyota Matrix, 2011 - 2016 Scion tC, 2013 - 2017 Lexus ES300h, 2016 - 2016 Scion iM, 2016 - 2017 Toyota Mirai, 2017 - 2017 Toyota Corolla iM.
Check Stock
Custom Shop - Gray Epoxy Primer/Sealer 2.1 VOC (Gallon Kit) Anti-Corrosive DTM High-Performance Primer for Automotive and Industrial use Kit = 2 Qt. Epoxy Primer + 2 Qt. Epoxy Hardener (1-1 Mix)
- Custom Shop – KEP Series Anti-Corrosive Epoxy Primer / Sealer is a 1 to 1 Mix Ratio high performance primer specifically designed to be used DTM (Direct to Metal). KEP Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat. Body Fillers and most properly prepared Rigid Plastics and sanded OEM Finishes..
- KEP Epoxy Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion. It also offers excellent salt spray resistance and is a fast dry product..
- Custom Shop – KEP Series Epoxy Primer is great as a DTM primer but also can be used as an excellent sealer for all single stage Urethane and Basecoat Clearcoat. If used as a sealer add 1/2 part of XR70 or UR70 reducer, topcoat or basecoat can be applied in 30 minutes. Using KEP allows for excellent topcoat gloss holdout..
- Available in Gray, Black and White in 1 quart kits, 2 quart kits, gallon kits and 2 gallon kits. Great for Automotive and Industrial applications. KEP is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
Check Stockuxcell Carbon Fiber Rod for RC Airplane DIY Craft 1mm Matte Pole 400mm 15.7 Inch, 10pcs
- Lightweight and high strength. Therefore, lightweight and high strength are the distinctive features of carbon fiber composites..
- Corrosion resistance, anti-aging, and long service life..
- Carbon fiber products are resistant to acids, salts, some organic solvents, and other corrosive resistance..
- They are superior to other metals in the field of corrosion protection and have good water resistance and aging resistance, so in corrosive environments..
Check Stockuxcell Carbon Fiber Rod for RC Airplane DIY Projects 2mm Matte Pole 200mm 7.8 Inch, 10pcs
- Lightweight and high strength. Therefore, lightweight and high strength are the distinctive features of carbon fiber composites..
- Corrosion resistance, anti-aging, and long service life..
- Carbon fiber products are resistant to acids, salts, some organic solvents, and other corrosive resistance..
- They are superior to other metals in the field of corrosion protection and have good water resistance and aging resistance, so in corrosive environments..
Check Stock
