Reviews Ansi Set Screw

Pro-Lift B-002D Grey Hydraulic Bottle Jack - 2 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
  • The lifting range is from 7-1/8" to 13-5/8"..
Check Stock

Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord

  • TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020..
  • THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375" thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
  • EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
  • MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
  • Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
Check Stock

3/4" Bore Weld on Hub for X Series (Diameter 2" w/ 3/16" Keyway) Farmer Bob's Parts WSH30012

  • 3/4" X-Series Weld on Hub Round Bore w/ Keyway Set Screw Meets ASTM/ANSI Standards B29.62 Fits X Series Weld Sprocket with 2" Diameter Hub for Sprocket Keyway 3/8 X 3/16".
  • 00030012, 20030012, 971-20030012, WSH30012, X3/4.
Check Stock

Powerbuilt Front End Vehicle Service Kit Tie Rod End Puller Car and Truck Ball Joint Remover Pitman Arm puller 6 Piece 648626

  • Removes tie rods, ball joints and Pitman arms without damaging parts.
  • Durable storage case with step-by-step instructions.
  • Precision-built to meet or exceed ANSI standards.
  • Kit Services: most cars and light trucks.
Check Stock

Homewerks Worldwide 3310-150-CH-B-Z Water Drinking Fountain Faucet 1/2" FPT WTR Bubbler, Chrome

  • Homewerks Worldwide bubbler head is made from a brass forging. It is polished and copper, nickel and chrome plated..
  • The water bubbler is easy to install. The bubbler is activated by a chrome plated Self-closing knob. Quarter turn drip free ceramic cartridge.
  • The bubbler meets ASME A112. 18.1M and is ANSI/NSF 61/Section 9 Certified. Meets standard requirements for low lead.
  • Vandal-proof set screws keep handle and adjustment screw caps in place..
  • 1/2 in. female pipe installation, 5.1 GPM at 60 PSI. Limited Lifetime Warranty.
Check Stock

Kwikset 99100-062 910 S TRL ZW 15 SMT Deadbolt, Satin Nickel

  • Motor-driven deadbolt latch allows for true remote locking and unlocking.
  • Z-wave enables the lock to wirelessly communicate with other devices in home.
  • Installs in minutes with just a screw driver - no hard wiring needed.
  • Requires 4 AA batteries, purchased separately.
  • Fits standard doors (1-3/8in. – 2in.) no new screw holes required.
  • Please refer user manual available under technical specification for troubleshooting steps.
Check Stock

Pro-Lift B-008D Grey Hydraulic Bottle Jack - 8 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
Check Stock

Pro-Lift B-012D Grey Hydraulic Bottle Jack - 12 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
Check Stock

Cleveland C70368 29 Piece High Speed Steel Heavy-Duty Screw Machine Length Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16' to 1/2' Size

  • Set of 29 heavy duty screw machine length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Uncoated (bright) finish has no additional surface treatment or coating.
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging.
Check Stock

Cleveland C70370 15 Piece High Speed Steel Heavy-Duty Screw Machine Length Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16\ to 1/2\ Size

  • Set of 15 heavy duty screw machine length drill bits includes inch sizes 1/16" to 1/2" in 1/32" increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Uncoated (bright) finish has no additional surface treatment or coating.
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging.
Check Stock

DEKOPRO 192 Piece Mechanics Tool Set Socket Wrench Set,Auto Repair Hand Tool Kit Wrench Tool Box Set with Plastic Storage Case

  • REQUISITE TOOL KIT:DEKO mechanics tool set contains the most useful and essential tools for basic household repairs. Hanging, box opening, screw tightening, it is the perfect starter kit for home repairs and basic vehicle repair kit.
  • HIGH QUALITY AND DURABILITY: Chrome vanadium forged, strong, durable and anti-corrosion protective. All the tools meet or exceed ANSI critical standards.Top-quality materials make repairing a breeze in most cases.
  • EASY TO CARRY:Housed in a handy blow-molded case for easy tool storage and portability. Its sturdy interior and organizer keeps tools in place.
  • STURDY STORAGE CASE & GOOD SERVICE:Vehicle tool kit are neatly stored in this mechanic tool box to keep them secure, clean and organized. We will provide you with the best service before and after your purchase our socket wrench set for mechanics.
  • DESIGN OF GREAT ORGINALITY:The Black case makes it dirt-resistant.Diamond shape design makes it unique and fashion .Case size: 14.96"(L)*3.93"(W)*17.72"(H).Weight 17.86 lb.
Check Stock

DURATECH Ratcheting Combination Wrench Set, SAE & Metric, 22-piece, 1/4″ to 3/4″ & 6-18mm, CR-V Steel, with Carrying Bag

  • Wrenches are made from durable chrome vanadium steel, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life. DURATECH 22-Piece ratcheting combination wrench set makes emergency repairs a breeze..
  • 72 teeth perfect precision with slim profile. The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. Top-quality hand tools for every repair project..
  • 22-piece SAE&Metric Ratcheting Combination Wrench Set that meets ANSI standard includes 11METRIC+11SAE unbreakable wrench: Metric 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and SAE 1/4’’, 9/32’’, 5/16’’, 11/32’’, 3/8’’, 7/16’’, 1/2’’, 9/16’’, 5/8’’, 11/16’’, 3/4’’. Standard and metric measurements ensure that you have the right tool to tackle any screw or bolt..
  • Tool roll for convenient storage and taking. The tool roll case has each wrench size printed which makes organizing easy..
  • This comprehensive collection of open-ended and ratchet wrenches is a must-have for your roadside emergency kit. They roll up neatly in an organizer bag for storage in your car trunk or mechanics gear..
Check Stock

Forester OEM Arborist Forestry Professional Cutter's Combo Kit Chaps Helmet

  • ...d other equipment. These ASTM189-14 & F3325-19 SA32851 Class B chaps are water and oil resistant. These chaps include a pocket, adjustable belt and are designed like aprons for easy on/easy off use..
  • Safety Helmet - This high quality helmet system is designed with ratchet suspension for the right fit and includes an ANSI Z87.1a mesh face shield to keep dirt and dust off the head and face. As well as an ANSI S12.42 earmuff set that acts as a hearing protector for your ear..
  • Clear Safety Glasses - ANSI Z87.1-2003 Glasses are included with this personal protective equipment safety gear so you can be sure of optimal safety and protection when cutting or working with any chainsaw tool. Eye protection is very important when using tools..
  • Safety Standards - Forester chainsaw safety gear is one of the most important parts of the job. These chaps, helmets and glasses are made to meet safety requirements. For extra precaution, make sure to wear Foresterleather work gloves and other gear as needed..
  • ANSI Z87.1/UV400 Approved Clear Safety Glasses Forestry Helmet: Meets ANSI/ISEA Z89.1-2009 Type 1, Class E, G & C/Screen meets Basic ANSI Z87.1 Requirements. Muffs: Meet ANSI S12.42 21dB Rating Chaps: Apron Style. UL Classified and tested in accordance with ASTM F189*7 ....
Check Stock