Reviews Ansi Screw

Pro-Lift B-002D Grey Hydraulic Bottle Jack - 2 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
  • The lifting range is from 7-1/8" to 13-5/8"..
Check Stock

Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord

  • TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020..
  • THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375" thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
  • EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
  • MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
  • Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
Check Stock

Kwikset 99100-062 910 S TRL ZW 15 SMT Deadbolt, Satin Nickel

  • Motor-driven deadbolt latch allows for true remote locking and unlocking.
  • Z-wave enables the lock to wirelessly communicate with other devices in home.
  • Installs in minutes with just a screw driver - no hard wiring needed.
  • Requires 4 AA batteries, purchased separately.
  • Fits standard doors (1-3/8in. – 2in.) no new screw holes required.
  • Please refer user manual available under technical specification for troubleshooting steps.
Check Stock

Pro-Lift B-008D Grey Hydraulic Bottle Jack - 8 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
Check Stock

Pro-Lift B-012D Grey Hydraulic Bottle Jack - 12 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
Check Stock

DIY.TK Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete，brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
  • Kit Includes:E6,E7,E8 anchors, #6x1",#8x1-1/4",#10x1-1/2"pan head self-tapping screws（ANSI) ,and a plastic case.
  • Plastic(nylon) material anchors,no rust,corrosion resistance,anti-aging,good toughness and can be easily removed.
Check Stock

US JACK D-51126 20 Ton Bottle Jack Made In USA

  • OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
  • In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
  • Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
  • 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
  • OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check Stock

Homewerks Worldwide VACBFPZ4B Vacuum Breaker Hose Bib Backflow Preventer, 3/4 Inch, Brass

  • FUNCTIONALITY: Homewerks Vacuum Breaker will help prevent water backflow to the main water supply. 3/4-Inch self draining vacuum, breaker, Male hose thread.
  • PERFORMANCE: Can operate into maximum temperature rating of 180º F/82º C and maximum operating pressure rating in 125 Psi. Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9.
  • COMPATIBILITY: The ¾-Inch thread outlet is compatible with most of standard hose and end valves including hose bib, sillcocks, wall faucets and garden hose..
  • CORROSION RESISTANT: Homewerks Vacuum Breaker is a corrosion resistant as it built with durable and reliable brass constructions..
  • HOMEWERKS TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all our products are produced and certified to regional, national and international industry standards..
  • Break-off screw for permanent attachment.
  • Meets ANSI / NSF 61 low lead requirements.
Check Stock

12 Ton Hydraulic Low Profile Heavy Duty Bottle Jack from TNM by Pittsburgh Automotive

  • Works in horizontal and vertical positions.
  • Extension screw allows low pickup height adjustment and maximum lift height.
Check Stock

Weslock 07300F2F2SL20 Wexford Knob Black

  • Meets ANSI A 156.2 Grade II lock standards.
  • Removable knobs/levers prevents scratching during installation.
  • Finish on the Strikes, Faceplates & Screw is consistent with the finish on the lock.
  • Limited lifetime mechnical & Limited 10 year finish warrany.
Check Stock

Pro-LifT B-033NC Grey Hydraulic Bottle Jack - 30 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
Check Stock

Weslock 01700I1I1SL20 Impresa Knob Oil-Rubbed Bronze

  • Meets ANSI A 156.2 Grade II lock standards.
  • Removable knobs/levers prevents scratching during installation.
  • Finish on the Strikes, Faceplates & Screw is consistent with the finish on the lock.
  • Limited lifetime mechanical & Limited lifetime finish warranty.
Check Stock

Pro-LifT B-S12D Grey Hydraulic Bottle Jack - 12 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
Check Stock