Reviews Angle Vise

Housolution Bench Vise 4 Inch, 360°Swivel Base Bench Clamp with 100mm Vise Jaw, Home Vise Clamp-On Vise Repair Tool Work Bench Vice for Cutting Conduit, Drilling, Metalworking - Black & Blue

  • ...ng and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
  • 【360 Degree Swivel Base with Dual Locking Nuts】: Built in 360 dergree swivel base, perfect for a wide range of clamping angles. Even if you are a left-hander, you can rotate the vise to the position that suits your work. The dual locking nuts helps to clamp the work piece properly..
  • 【Magnetic Vise Jaw Pads with Multi Grooves】: Packaged with 100mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting flat or round product. Provide three kinds of angle for clamping items: 60°, horizontal angle, vertical angle. Please refer to the picture for angle diameter..
  • 【Wide Applications】: This bench vise is designed for home, workshop, professional use, general purpose and light work, ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors. Convenient and quick to install on or remove from kinds of workbench..
Check Stock

findmall Parrot Vise 3.5 Multi-Angle Vise 3-1/2 for Luthiers and Woodcarvers

  • Features - This unique vise swivels a full 360-degrees and then locks in place when the jaw is tightened..
  • Multi-Angle - Capable of clamping in the upright position, side-to-side or at any angle..
  • Convenience - This handy vise can be used in nearly any position for a range of applications..
  • Advantage - The Parrot Vise can be mounted sideways for versatility and allows you to secure your workpiece in whichever position is most suitable for your application..
  • Application - Great vise for Luthiers and woodcarvers and anyone that works with uniform or odd shaped materials that want extra versatility in work-holding and workpiece placement..
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

Raynesys Bench Vise, 4-1/2\ for Workbench, 4.5 Inch Table Vise Heavy Duty with 260° Flexible Swivel Base for Woodworking, Metalworking, Cutting Conduit, Drilling - Blue

  • ... to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
  • 【Swivel Feature】: Built in 260 degree swivel base, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while you are working with a hand tool as there is no need to keep inserting and removing the piece you are working on..
  • 【Rubber Jaws Covers】: Packaged with 125mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting any flat or round product. Provide three kinds of angle for clamping items: 45°, horizontal angle, vertical angle. Please refer to the picture for angle diameter..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

Bench Vise, Portable Work Bench Clamp Vise with Tilts Rotate 360°, 3" Home Table Vise Clamp-On for Woodworking, Drilling, Sawing, Jewelry Making

  • 【Universal Table Vise】This 3-inch universal bench vise has a jaw width of 3 inches/79mm and an opening of 2 inches/51mm. Clamps to surfaces up to 2 inches thick..
  • 【Sturdy Material】The portable bench vise is made of heavy-duty aluminum, this table vise offers incredible strength for gripping objects with ultra durability..
  • 【Multifunctional Use】The adjustable vise is suitable for woodworking, jewelry, hobby, model making, electronics and other fields to fix small parts..
  • 【Rotatable Design】Universal bench vise head rotates 360 degrees and tilts 45 degrees to hold securely at any angle..
  • 【Easy to Install】The oval base can be easily and quickly mounted on the desk without any tools..
Check Stock

RIDGID 40220 461 Straight Pipe Welding Vise, 1/2-inch to 8-inch Pipe Welding Clamp,Red,Small

  • Designed for secure clamping onto straight pipes.
  • pipe welding vise is available in straight, angle, elbow and flange styles.
  • Constructed of durable, performance-proven material for reliable, long-lasting use.
  • Straight welding vise resists strain, heat and warping during tacking.
  • Machined swivel nuts and pins combined with special chain screws allow for smooth, trouble-free vise assembly onto the pipe.
  • Straight pipe welding vise has a 1/2-inch to 8-inch (15 mm to 200 mm) pipe capacity.
Check Stock

Wicked Edge Pro-Pack III with Hard Carrying Case, WE130PR18024

  • MADE IN THE USA. Sharpens a very wide assortment of knives - offers the most versatility. Generation 3 Cam-Lock Vise - one-step knife clamping and doesn't require additional tools to operate..
  • INCULDES: - Coarse 100 Grit / Medium Coarse 200 Grit Diamond Stones Pack. - Medium Fine 400 Grit / Fine 600 Grit Diamond Stones Pack..
  • WIDEST RANGE OF CUSTOMIZABLE ANGLES. Ability to adjust angles independently for asymmetrical grinds. Clamps the widest variety of knife grinds, including blades that are full-flat-ground or distally tapered..
  • CAN SHARPEN BLADES UP TO 15" LONG. Angle Range: 13 to 35 Degrees ( 26 to 70 degrees inclusive). Main angle adjustment in 1 degree increments, and micro-angle adjustment in 0.05 degree increments. Sharpener's angle markings are calibrated for knife's edge at 5/8" over top of vise..
Check Stock

Dremel 2500-01 Rotary Tool Multi-Vise, 3-in-1 Attachment with 360 Degree Stationary Vise, Stand-Alone Clamp, and Tool Holder , Grey

  • Get total control over your project with the Dremel Multi-Vise. The simple-to-use Multi-Vise securely holds your project in place, providing you the freedom to work with both your hands..
  • The Multi-Vise is a 3-in-1 attachment featuring a stationary vice for your work piece, a stand-alone clamp, and a tool holder for your Dremel Rotary Tool..
  • Features an easy-to-adjust 360° rotating base and 50° tilt function to work on your project from any angle. The jaws of the clamp include removable rubber caps and V-grooves to increase grip and protection of your work piece and eliminate the risk of scratches on your valuables while clamping..
  • The quick release button on the Multi-Vise allows you to move, check and re-clamp your work piece with ease and convenience. Vise clamps to any work surface up to 2-1/2 In. thick.
  • Compatible with most Dremel rotary tools, the Dremel Multi-Vise tool holder turns Dremel rotary tools into a stationary sander, grinder or polisher..
  • 1 Year Manufacturer Warranty & USA-Based Customer Service– Available by chat, email, phone or visit us at our service center in Racine, WI.
Check Stock

Upgraded Angle Grinder Stand Universal Fixed Grinder Holder Sliding Handle Bracket Adjustable 45 Degree Clamp with Protective Cover

  • UNIVERSAL ANGLE GRINDER STAND - Upgraded holder clamp for angle grinders within 150 mm / 5.9 in. Adjustable fixing arm for multiple types of angle grinders..
  • ADJUSTABLE CLAMPING MATERIAL ANGLE & WIDTH - The vise at the base allows flexible clamping adjustment. The maximum clamping angle can reach 45 degrees with a clamping width of 80 mm. And it holds a max 150 mm (5.9 in) width in 0 degrees..
  • USER-FRIENDLY - Just press and hold the yellow button and gently pull or push the screw rod to adjust the clamping range. Tough spring has sufficient elastic force to return quickly and does not deform after stretching..
  • SMOOTH SLIDING & ACCURATE CUTTING - the smooth sliding rail provides smooth sliding and a max 150 mm (5.9 in) cutting length. The extended non-slip handle offers a comfortable cutting experience. Fine-tuning knob and locking fixture at the vise are designed for more stable cutting. Non-slip silicone fixed shaft for more stable angle grinder holding..
  • SAFE - Extended holding handle keep your hands away from the cutting area of the saw-blade. The large and thick protective cover can effectively protect your hand and refrain iron chips and wood chips from flying..
Check Stock

IRWIN Tools VISE-GRIP Groove Joint Pliers, Straight Jaw, 16-Inch (2078516)

  • IRWIN VISE-GRIP pliers feature a durable nickel-chromium steel construction.
  • Dipped grips provide extra comfort and help reduce hand fatigue while using the IRWIN pliers.
  • Right-angle teeth grip in all directions for maximum bite.
  • Groove-joint pliers have 9 jaw positions.
Check Stock

37 Pieces Hand Drill Tool Set Include Pin Vise Hand Drill with Miniature Drill Micro Mini Twist Drill Bit and Bench Vice for Craft Carving Resin Keychain Jewelry Making(0.3-1.2 mm PCB Drill)

  • Pin vise: made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
  • Bench vise: made of aluminum alloy and plastic, its light weight and small size make it suitable for you to hold and carry, designed with 4 plastic clips for clamping square, round and irregular objects of 0 - 57 mm size.
  • Twist drills and tiny drills: the drill bits are lightweight, won't take up extra spaces, can be applied for handling wood, plastic, rubber, PVC, walnut, model, bone, angle, amber, olive, fiberglass, and other materials.
  • Fit dimension: the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.
  • Package content: comes with 1 x pin vise, 10 x PCB mini drills, 1 x bench vise and 25 x twist drills in 17 different sizes, sufficient quantity and adequate styles for you to carve your favored craft or DIY sculpture.
Check Stock

Miller Electric - .030-.035 V Groove Drive Roll (204579)

  • Sets up in seconds and holds flat round or odd shaped pieces..
  • Magnetic on off Vise is perfect for holding small to medium size steel pieces while drilling, cutting, grinding and beveling etc..
  • Doubles as a multi angle work holding tool with all the fixed common angles you need.
  • A portable instant on off vise that you don't have to bolt in place.
Check Stock