Reviews Angle Iron Steel

18pc HD Heat Treated Dent Puller w/13lbs Slide Hammer Auto Body Shop Repair Tool

  • ... 【Easy to Carry】 Comes with a durable plastic storage case, you can neatly collect the tools and easily bring them anywhere you like.
  • 【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.
Check Stock

8MILELAKE Auto Truck Dent Puller Tool Set with 10lbs Universal Slide Hammer 13pc Dent Repair Tool

  • 【Applications】This dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
  • 【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.
  • 【A Storage Case】Comes with a portable plastic case for easy carrying. Keeps all the repair tools tidy and resist abrasion.
Check Stock

Little Giant WST1-3048-36 Welded Steel Workbench with Open Base, 5000 lb. Load Capacity, 36\ x 48\ x 30\

  • Welded steel workbench with open base and 5,000 lb. load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Angle iron cross braces on lower braces are centered to provide legroom.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
Check Stock

9' L Reciprocating Saw Blade, 5 pk.

  • 10 TPI, 9 in. Length, Bi-Metal Construction.
  • 1/2 in. Universal Tang fits all Sawzalls.5 blades per pouch.Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.Limited warranty.
  • 1/2 in. Universal Tang fits all Sawzalls.
  • Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Little Giant WST2-3060-36 Welded Steel Workbench with Lower Shelf, 4500 lbs Load Capacity, 36\ Height x 60\ Width x 30\ Depth

  • Welded steel workbench with lower shelf and 4,500 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock

Little Giant WST2-3672-36 Welded Steel Workbench with Lower Shelf, 4000 lbs Load Capacity, 36\ Height x 72\ Width x 36\ Depth

  • Welded steel workbench with lower shelf and 4,000 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock

HFS R Two Axis Welding Clamp 4

  • [Material]: Durable right angle clamp, made of cast iron. Allows two wood block of different thicknesses to be joined at a 90 degree angle..
  • [Size]: 4'', Width of jaw 100mm,and Max.opening 75mm, can clamp materials like steel rod, metal tube, wood, thick glass, etc..
  • [Unique Design]: Sliding T-shaped single handle with adjustable rotary jaw to align and hold work pieces precisely. Solid and anti-skid, helps to set....
  • [Application]: Mainly uesd for iron products angle welding..
  • Can be used as a clamping device for 90° corner joints. Perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box and....
Check Stock

HFS (R) Two Axis Welding Clamp (3'')

  • [Material]: Durable right angle clamp, made of cast iron. Allows two wood block of different thicknesses to be joined at a 90 degree angle..
  • [Size]: 3'', Width of jaw 75mm,and Max.opening 60mm, can clamp materials like steel rod, metal tube, wood, thick glass, etc..
  • [Unique Design]: Sliding T-shaped single handle with adjustable rotary jaw to align and hold work pieces precisely. Solid and anti-skid, helps to set up instantly and secure quickly..
  • [Application]: Mainly uesd for iron products angle welding..
  • Can be used as a clamping device for 90° corner joints. Perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box and picture frames..
Check Stock

Little Giant WST2-2460-36 Welded Steel Workbench, 4500 lb. Load Capacity, 1 Half-Shelf, 36\ x 60\ x 24\

  • Welded steel workbench with lower shelf and 4,500 lb. load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Angle iron cross braces on lower braces are centered to provide legroom.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • Lower half-shelf with 3" lip for storing items while providing legroom.
Check Stock

Little Giant WST2-2448-36 Welded Steel Workbench, 5000 lb. Load Capacity, 1 Half-Shelf, 36\ x 48\ x 24\

  • Welded steel workbench with lower shelf and 5,000 lb. load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Angle iron cross braces on lower braces are centered to provide legroom.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • Lower half-shelf with 3" lip for storing items while providing legroom.
Check Stock

BOSCH CO2143 1/4 In. x 4 In. Cobalt Drill Bit

  • Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF).
  • Rigid, thick web design adds stability to bit in tough applications.
  • Surface hardened to penetrate tough abrasive materials, Cuts through light gauge metal, high carbon steel, aluminum and alloy steel, cast iron and stainless steel.
  • Available in jobber length, full shank, Drill Point Angle is 135 degrees, Surface Coating is uncoated (bright finish), Bit type is Twist.
  • Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium.
Check Stock