Reviews Android Prototyping Board

DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects

  • 100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
  • 0.1" hole spacing for DIP integrated circuits and headers..
  • THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
  • MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
  • Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
  • THE FLEXIBILITY OF HAVINg CHOICES  ★  Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
  • PACKAGE COMPONENT  ★  40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
  • 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.
Check Stock

Jameco Valuepro 830-Point Solderless Breadboard 6.5 x 2.125 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-202-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 3220-Point Solderless Breadboard 7.3 L x 7.5 W 0.1 Spread Ideal for Prototyping and Classroom Projects - WBU-208-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 2390-Point Solderless Breadboard 6.9 L x 5.8 W 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-206-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

JAMECO VALUEPRO - WBU-204-R Jameco Valuepro 1660-Point Solderless Breadboard 6.5 L x 4.3 W 0.1 spread Ideal for Prototyping and Classroom Projects - 20774

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing..
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

Seeed Studio LoRa-E5 Development Kit - Based on LoRa-E5 STM32WLE5JC, LoRaWAN Protocol and Worldwide Frequency Supported.

  • ...h Performance】LoRa-E5 Mini Development Board is an easy-to-use compact development toolset for you to unlock the powerful performance of the LoRa-E5 STM32WLE5JC. It consists of a LoRa-E5 Mini Board, an antenna(EU868/US915), a USB type C cable, Sticker and a 1X12pin male pin headers..
  • ✨【Easy Testing and Rapid Prototyping】The sleep current of LoRa-E5 modules on board is as low as 2.1 uA(WOR mode). It is a user-friendly board for easy testing and rapid prototyping..
  • ✨【Full GPIOs Led Out to Rich Interfaces】LoRa-E5 Dev Board also has rich interfaces, including RS-485, Grove, and etc. Developed to unlock the full functionality of the LoRa-E5 module, LoRa-E5 Mini Dev Board has led out full 28 pins of LoRa-E5 and provides with rich interfaces including Grove connectors, RS-485 terminal, male/female pin headers for you to connect sensors and modules with different connectors and data protocols, saving your time on wire soldering..
  • ✨【Long-distance Transmission Range to 10km】LoRa-E5 Mini Dev Board features an ultra-long transmitting range of LoRa-E5 up to 10km in an open area, extremely low chip power consumption, and user-friendly interfaces. Note: Ideal value in open area..
  • ✨【Global LoRaWAN and LoRa Frequency Plan Supported】LoRa-E5 Min....
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino

  • This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
  • Uses I2C input, just occupy A4 and A5 interface on the control board.
  • Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
  • Servo power supply independent V + input up to 6V.
  • How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check Stock

Bignc 50 Pack Colorful Game Card Stands 50 Pieces White Blank Game Board Marker for DIY Board Game Party Favor

  • 50 pieces assorted color plastic square base stands, 50 pieces game board markers and 2 pieces dice.
  • Thickened board, not easy to break. High quality plastic base for long-term use ..
  • Board marker size: 1 x 2 inches( W x H), 2 mm in thickness, the board game stands: 3/ 4 x 3/ 4 inches square base, 1/ 2 inch in height.
  • Perfect for prototyping and DIY board games, can also be applied to cardboard models, you can draw the pattern you want on the blank board..
  • Paperboard can be written on both sides, not easy to erase. Able to keep the pattern for a long time ..
Check Stock

Arduino MKR WiFi 1010 [ABX00023]

  • MKR 1010 simplifies the prototyping of WiFi-based IoT applications, easily connected and configured to other Arduino products. You do not need to be a network expert!.
  • The hybrid WiFi / BLE connectivity module has a low power consumption mode, improving the life of your batteries..
  • Ideal for: Entry point to and professional IoT, building wireless sensor networks in minutes, remotely operated devices..
  • Cloud features: the board can connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. It is also possible to connect your board to different Cloud services, including Arduino IoT cloud!.
  • Simply to power with a USB cable or external Li-Po 3.7V battery. Recharge the battery through the USB port..
Check Stock

Intel Neural Compute Stick 2

  • Deep learning prototyping is now available on a laptop, a single board computer or any platform with a USB port.
  • Accessible and affordable—take advantage of more performance per watt and highly efficient fanless design.
  • Combines the hardware-optimized performance of the newest Intel Movidius Myriad X VPU and the Intel Distribution of OpenVINO Toolkit to accelerate deep neural network-based applications.
Check Stock

Cermant 20PCS 15x18cm Bakelite Prototype Board PCB Printed Circuit Board for Soldering Electronics Project Experiment for Arduino DIY Electronics Experiments (5pcs 15x18cm)

  • Pcb prototype board, the proto boards are in the color of Red.
  • Material: 94HB Bakelite Prototyping Board.
  • FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on..
  • PACKAGE CONTENT - 5pcs x Universal PCB Board.
Check Stock