Reviews Anchoring Drill

Keyfit Tools Power Anchor (8 Pack) Self Drilling Stakes for Pop-Up Portable Ice Fishing Shelter House Self Drilling Stake Anchor

  • Keyfit Tools Power Anchor Self Drilling Stakes for Pop-Up Portable Ice Fishing Shelter House Self Drilling Stake Anchor.
  • Self Drilling Cutting Tip Solid Steel ~ Case Hardened Grade 8 Steel Heat Treated & Tempered For Extreme Durability.
  • Use with or without Secura Strap for Easy Anchoring High Winds No Problem ~10 inch length for Extra Anchoring.
  • USE DRILL ON SLOW SPEED with down force. Let the screw threads cut into the ice making a groove for them selves. Too much speed will strip the ice. Does Not Include Drill.
  • See All The Keyfit Tools Products On Amazon ~Keyfit Tools Patented Products.
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ...ount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers.
Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

  • ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
  • LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....
Check Stock

General Tools 36/37 Precision Drill Guide For 3/8-Inch or 1/2-Inch Power Drills, Portable & Lightweight, Folds Flat for Storage, Silver

  • BUILT IN PROTRACTOR- drills accurate right-angled or variable-angled holes with the built-in protractor scale.
  • ADJUSTABLE- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position.
  • POSITIVE STOP- built-in depth stop for accurate drill depth.
  • WORKS WITH DOWELS- v-groove for positioning round stock, pipe or tubing. A slide lock facilitates sanding and buffing.
  • STABLE- anchoring pins to hold the guide securely in place on flat surfaces, narrow edges or large tubing.
Check Stock

E-outstanding Sleeve Anchor 10PCS 304 Stainless Steel Sleeve Bolts for Concrete, Masonry and Brick M6x70mm

  • Size: M6x70mm. Total length: 70mm. Sleeve length: 50mm. Screw diameter: 6mm. Sleeve diameter: 8mm..
  • Made of high-quality 304 stainless steel, corrosion-resistant, sturdy , durable and long service life..
  • Can be installed in various masonry, solid concrete, bricks or blocks..
  • The anchor needs to drill an 8mm hole in the base material (concrete, bricks and bricks), which should be drilled with a carbide drill bit and used for hammer drilling..
  • The hole in the fixing device or the material to be fixed must be larger than the specified diameter of the anchor. M6 diameter anchoring requires 8mm holes on the fixing device..
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

Simpson Strong-Tie THD50600HMG Titen HD Concrete Screw Anchor (Galv) 1/2\ x 6\ 20ct

  • Corrosion resistance and long lasting performance due to the EnviroSeal blue coating.
  • Deep threads provide superior holding strength.
  • Great for anchoring items to concrete, brick, block, or other masonry materials.
  • The diamond tip allows for superior penetrating into hard materials.
  • Package includes 100 screws and 1 masonry drill bit.
Check Stock

100 Qty 1/4 x 4 Hex Head Diamond Tip Concrete Screws to Anchor Masonry Block & Brick BCP503

  • Corrosion resistance and long lasting performance due to the EnviroSeal blue coating.
  • Deep threads provide superior holding strength.
  • Great for anchoring items to concrete, brick, block, or other masonry materials.
  • The diamond tip allows for superior penetriating into hard materials.
  • Package includes 100 screws and 1 masonry drill bit.
Check Stock

Toggler 44-Piece Combo Anchor Kit - Heavy Duty Industrial Drywall Mounting Toggle Screws & Bolts Assortment - Safe Concrete Wall Anchoring for TV Bike Shelf Straps Cabinet & Decoration

  • FASTENER KIT. Providing solutions for all of your anchoring needs, the Toggler 44-Piece Combo Anchor Kit contains 20 self-drilling drywall anchors, 10....
  • VERSATILE USE. This variety of anchors is designed to accommodate light, medium- and heavy-duty applications. They’re great for any project ranging....
  • EASY INSTALLATION. Besides requiring a #2 Phillips screw driver, the TOGGLER TB requires a 5/16-inch drill bit, SNAPTOGGLE requires a ½-inch drill....
  • MULTIPLE APPLICATIONS. The self-drilling and plastic anchors are suitable for installing in drywall, while the bolts and all-purpose anchors can be....
  • DURABLE CONSTRUCTION. The injection-molded nylon anchors and polypropylene anchors won’t snap upon installation like plastic versions, while the....
Check Stock

100 Qty 1/4 x 1-3/4 Hex Head Diamond Tip Concrete Screws to Anchor Masonry Block & Brick BCP499

  • Corrosion resistance and long lasting performance due to the EnviroSeal blue coating.
  • Deep threads provide superior holding strength.
  • Great for anchoring items to concrete, brick, block, or other masonry materials.
  • The diamond tip allows for superior penetriating into hard materials.
  • Package includes 100 screws and 1 masonry drill bit.
Check Stock

100 Qty 1/4 x 1-1/4 Hex Head Diamond Tip Concrete Screws to Anchor Masonry Block & Brick BCP498

  • Corrosion resistance and long lasting performance due to the EnviroSeal blue coating.
  • Deep threads provide superior holding strength.
  • Great for anchoring items to concrete, brick, block, or other masonry materials.
  • The diamond tip allows for superior penetriating into hard materials.
  • Package includes 100 screws and 1 masonry drill bit.
Check Stock

SNUG Fasteners (SNG501) 100 Qty 1/4\ x 2-3/4\ Hex Head Diamond Tip Concrete Screws to Anchor Masonry, Block & Brick

  • Corrosion resistance and long lasting performance due to the EnviroSeal blue coating.
  • Deep threads provide superior holding strength.
  • Great for anchoring items to concrete, brick, block, or other masonry materials.
  • The diamond tip allows for superior penetrating into hard materials.
  • Package includes 100 screws and 1 masonry drill bit.
Check Stock

SNUG Fasteners (SNG502) 100 Qty 1/4\ x 3-1/4\ Hex Head Diamond Tip Concrete Screws to Anchor Masonry, Block & Brick

  • Corrosion resistance and long lasting performance due to the EnviroSeal blue coating.
  • Deep threads provide superior holding strength.
  • Great for anchoring items to concrete, brick, block, or other masonry materials.
  • The diamond tip allows for superior penetrating into hard materials.
  • Package includes 100 screws and 1 masonry drill bit.
Check Stock