Reviews Analog Multimeter

Tekpower TP8250 Analog Multimeter with NULL Middle Position 0 For Variation Measurement

  • High Accuracy Analog Multimeter with Null Function and Back Stand, With Null Position, you can see the reading in middle when no input.
  • DC V 0-500V, AC V 0-500V,DC A 50uA-500mA, Resistor: 10-1K-100K.
  • Zero Adjustment on analog and High accuracy on digital display.
  • Confirms to the EN61010/IEC1010 standard CAT II 600V.
Check Stock

Fluke 83-5 Industrial Digital Multimeter

  • Digital multimeter measures AC/DC voltage, current, frequency, resistance, and capacitance, and performs continuity and diode tests.
  • Average-responding, RMS-indicating meter provides correct readings for linear loads such as induction motors, resistive heaters, and incandescent lights.
  • Min./Max. average recording with Min./Max. alert to capture variations automatically.
  • Analog bar graph for fast changing or unstable signals.
  • Safety rated for Category III to 1,000V and Category IV to 600V.
  • Auto and manual ranging for maximum flexibility.
  • Measure up to 10 A, 20 A for up to 30 seconds.
Check Stock

allsun Handheld Digital Oscilloscope Multimeter DIY Portable Automotive Diagnostic Lab Scope 3 in 1 Color LCD Display DMM 50MHz Single Channel

  • Digital Oscilloscope is portable tool for waveform measurement. In contrast with analog oscilloscope, desktop digital oscilloscope or digital multimeter, it is one of the best test tool for use in teaching or field.
  • The handheld oscilloscope the bandwidth is 50 MHz, the sampling rate is 200 MSa/s, and it owns 320*240 mm high-resolution color-screen, auto function works great and gives the best results most of the time, saving time and adjustments.
  • The Automotive Oscilloscope combines scope function, multimeter function and signal generator function,it is a beautiful looking unit works pretty well and has a nice feel from the rubber case.
  • The oscilloscope can quickly and accurately detect the faults of the circuit under test and can serve as an electronic engineer's assistant, and will provide great convenience for you in work.
  • The portable oscilloscope fetures 6000-count high-precision multimeter chip, NPX intelligence collection chipset. 4100 mAh Sony lithium-battery long working hours.
Check Stock

KKnoon Circuit Breaker Finder - Multifunction Network Cable Tester for CAT5/CAT6,Ethernet Cable Tester with Multimeter,Poe Circuit Tester,Test Fault Distance Location and Length Measurement

  • 【Upgrade Multi-Function Circuit Breaker Finder】 Including poe tester,Anti-disturbance cable scanning,continuity tester, voltage testing,Fault distance location,port flashing,Vibration Mode,Volume adjustment, multimeter, cable length testing, and LED flashlight function..
  • 【3 Modes Network Cable Scanning】Circuit breaker finder has a Unique Anti-disturbance digital scanning mode, analog mode, Poe mode.1500m Max audio transmission distance.16-20VP-P super strong signal to cable tracer.You can set the frequency, and three modes can be switched freely..
  • 【Multimeter】The breaker finder with all in one multimeter with DC AC Voltmeter and Ohm Volt Amp Tester.
  • Circuit tester measures voltage , Current.K-type probe to measure temperature 20-1000℃,AC Voltage, Current testing range 4-400V,1.0A-10A.NCV power display and diode testing..
  • 【Poe testing & Hub Blink】The K618 network cable tester can identify pins that are providing power and detect how much voltage, Locate network port by the flashing port light (blink every 1 second) on Hub and Switch. Available to 500M Hub/ switch. The measurement area includes circuit t....
Check Stock

Keeptop Non-Contact Voltage Tester - Electrical Tester with Dual Range AC 12 to 1000V, Live/Null Wire and Circuit Tester, Voltage Detector with Flashlight and Pocket Clip

  • Super Large LCD Screen -- Compared with other voltage testers, our screen is 6.6 larger than their testers, and the high resolution screen will show 3 test results, such as the volt, frequency and analog bar.
  • Non-Contact & 8 LED Indicators -- Non contact voltage detection ensures the safety of testing, and 8 LED Indicators in 3 colors display (Green, Yellow, Red) help to distinguish the detected voltage intensity easily.
  • Auto-ranging Digital Multimeter -- Designed for the novice. Plug the test leads only, the multimeter tester can smart to test voltage DC or AC frequency, resistance, as well as continuity.
  • Perfect Helper for Electrical Issues -- SUETTLA X1 Volatge tester arrive CAT II 600V safety level, help to detect the null/live wire, breakpoint locate, AC/DC volts testing, Ohm measure etc, to save the high service fees..
  • Fastest Reading Speed -- With upgraded chips, greatly increase the sensitivity, make the voltage multimeter tester measuring in 0.2s (5 times/s).
Check Stock

KAIWEETS Digital Multimeter Voltmeter Smart Electrical Tester Measures Voltage Current Resistance Continuity Duty-Cycle Capacitance Temperature Frequency Auto Ranging 10000 Counts TRMS

  • Smart Mode: The multi meter defaults to Smart Mode. In Smart Mode, the meter can test voltage, resistance, and continuity automatically -- it can identify the measurement content and selects the range with the best resolution, you don’t need to do anything extra!.
  • Upgraded Display: The voltmeter with a large LCD color screen, and flashlight for easy reading even in bright or dim places. In addition, the voltmeter can display analog bar, real-time temperature, low battery prompt, and damaged fuse prompt..
  • Wide Applications:This digital multimeter is suitable for diagnosing automotive, industrial and household electrical problems. The KM601 multimeter can accurately measure AC/DC voltage, resistance, continuity, AC/DC current, capacitance, frequency, diodes, duty cycle, temperature, NCV and live wire..
  • Safety First: IEC Rated CAT.III 1000V, CAT.IV 600V, CE and RoHS certified. Anti-Burn with double fuses and overload protection. The silicone cover provides additional drop protection and withstands daily workwear..
  • Customer Service: KAIWEETS provides 3 years after-sale service and technical support. This digital multimeter is included with 6 AAA batteries, comes with a carrying case, 2 decent cable leads, a user manual and a thermocouple..
Check Stock

EONE ET310B Bluetooth Oscilloscope Multimeter Connectable to Android Phone Handheld Digital Oscilloscopes Kit DSO+DMM 80M Sampling 20MHz Bandwidth Auto Waveform Capture

  • ▼LCD display Oscilloscope and auto-range TRMS Multimeter in 1 lab oscilloscope meter, portable design, more convenient and cost-effective.....
  • ▼Connectable to Android phone and tablets wirelessly by bluetooth, remote testing available, suitable for test at difficult environment..
  • ▼Multimeter functions: 4000-count, automatic range, TRMS, AC/DC voltage, AC/DC current, resistance, frequency, capacitance, diode test, duty ratio,....
  • ▼Oscilloscope functions: 80M sampling rate, 20MHz analog bandwidth, one-key oscilloscope. Trigger modes: auto, normal, single. Auto measure: Vp-p,....
  • ▼Display maximum value, minimum value, difference value and relative value on the same screen. Storage/readout 100 sets waveforms and 100 sets....
Check Stock

PC Interface Controller

  • 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
  • Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
  • Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
  • (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
  • When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check Stock

UNI-T UTG932 + UTD2152CEX, Function Generator and Oscilloscope Kit

  • 25 MHz to 50 MHz BANDWIDTH 1/2 ANALOG CHANNELS 250 MSa/s REAL-TIME SAMPLE RATE 12 kpts MAX. MEMORY DEPTH voltage, current, resistance, etc. Display count:3999 MULTIMETER 3.5 inches TFT LCD DISPLAY.
  • UTD1050CL 50 MHz 1 200 Msa/s 12 kpts voltage, current, resistance, etc. Display count:3999 3.5 inches TFL LCD.
Check Stock

Southwire Tools & Equipment M400TP Professional Data Cable Mapper

  • 10 MEASUREMENT FUNCTIONS: This Digital Multimeter measures AC and DC Voltage, AC and DC current, continuity, resistance, Capacitance, frequency, duty....
  • MULTIPLE USE DESIGN: This compact digital multimeter features a 3-in-1 design with multimeter, non-contact AC Voltage detector and work light..
  • DURABILITY AND RELIABILITY: The 16020N Compact 3-in-1 CAT IV Digital Multimeter was built to last and has a drop test of 2M..
  • SAFETY AND INDUSTRY APPROVAL: This multimeter is UL Listed – representative samples of this product have been evaluated by UL and meet applicable....
  • WHAT’S IN THE BOX: The multimeter tester - 16020N Compact 3-in-1 CAT IV Digital Multimeter and AAA Battery (2) Included..
Check Stock

Universal Microwave Diode Compatible for GE WB27X10597 Whirlpool W10492276 and Others 2 PCS

  • Production Name: Microwave High Voltage Diode, Withstand Voltage: 12 KV, Rated Current:450 mA,O Terminal Diameter: 4.2mm/0.17in, Female Terminal....
  • Compatible and directly replace GE WB27X10597 Whirlpool W10492276 high voltage diode for microwave.
  • Heat shrink tubing on female side and keep safe for ever,widely use for microwave.
  • Replace high voltage diode which marked T4512, 4512,CL4512, CL04-12.
  • Please use an analog multimeter with 9 V DC battery to measure the diode's polarity, because its gate voltage is more than 3V DC (which most digital....
Check Stock

Digital Multimeter Tester, Electrical Voltmeter Tester, Volt Multi Meter, Car Battery Tester Circuit Tester

  • Functions：Accurate measurement of Non-contact voltage test, AC/DC voltage, current, resistance, continuity, frequency, capacitance, and diode, temperature, wire on-off, Battery test. This multimeter can diagnose the automotive, industrial, and household electrical issues..
  • Durable：The outer layer of the digital multimeter is wrapped with a sturdy silicone protective cover. Generally, a drop will not affect the integrity of the multimeter. The automatic range of the digital multimeter is 6000 ranges to ensure the long-term accuracy of the data.
  • Convenient： Designed with a digital LCD display and 'Backlight', showing the reading clearly in dim environment areas. There are two pen holders on the back of the digital multimeter for easy placement.
  • Safety：Passed CE, RoHS certification, with dual fuses and thermistor protection circuits for anti-burn and explosion-proof. Any current range will be protected stably.
  • Practicality: Digital multimeter can record measurement data, which is more convenient. Multimeter with a flashlight lighting..
Check Stock

Keeptop Digital Multimeter 6000 Counts Multimeter Tester - Electrical Multi Tester with Ture TRMS Auto-Ranging for Measuring Voltage, Current, Resistance, Continuity, Live/Null Wire Tester

  • Multifunction Multimeter - This digital multimeter features intelligent recognition and manual functions. Accurately measures AC and DC voltages, AC and DC currents, resistance, capacitance, continuity and diodes. You can use it to check industrial, vehicle and home electrical problems. It is a useful tool for troubleshooting sockets, fuses, batteries, and automotive circuits. Suitable for electricians, engineers, electronics enthusiasts or home use..
  • Smart Mode Measurement - The "SMART" mode of the digital multimeter automatically identifies voltage, resistance and continuity tests. Measurements can be made without any operation, suitable for beginners and professionals. When the digital multimeter is turned on, the default mode is the Smart function..
  • Safety First - This multimeter is designed for safe and rugged conditions. The multimeter meets CAT.III 600V overvoltage safety standards and Class 2 pollution standards. The ceramic fuse provides overload protection. The silicone cover protects the multimeter from drops and electric shocks. Test lead tips show you how to insert the red or black probe properly..
Check Stock