Topping P50 Linear Power Supply for Topping D50/D50s/DX3 Pro/A50
- Excellent Power Supply - Topping p50 match to D50s&D50/D50s+A50.It is a excellent partner to DX3 Pro.
- Compatible with Globlal Voltage - 115V for AC 100V-120V 50/60 Hz,230V for AC220V-240V 50/60 Hz.
- Low Noise - The sealed toroidal transformer has small magnetic leakage and low noise,which is very suitable for HIFI use.And the transformer is designed to suppress EMC and noise.
- High Power Reserve - The 15V modules providesmore than 10000uF capacitors in total,and the 5V modules provides total more than 8000uF capacitors in total.
- Linear Regulator - The P50 is regulated with three TPS7A4700 ultralow noise linear regulators.It is capable of high-accuracy,high-precision instrumentation-level applications and HIFI applications,making in the best choice for high-performance analog circuits.
Check Stock
Autel MaxiCheck Maxicom OBD2 Diagnostic Scanner MX808(Advanced MD808 Pro Same MK808) With 5ft Extension Cable Full Systems And Service Functions Oil Reset EPB BMS SAS DPF TPMS Relearn IMMO
- With a 5 feet extention 16 pin Cable, read/clear codes for all available systems (POWERTRAIN SYSTEM, BODY SYSTEM, CHASSIS SYSTEM, INFO & COMMUNICATION).
- Auto VIN Detection: Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time. Display live data in text, graph & analog for easy data review.
- Relearn parking brake pad after replacement. Support IMMO functions forced DPF regeneration and adjusting injectors.
- Reset Steering Angle Sensor (SAS)， service mileage and service intervals. Support TPMS sensor relearn， battery registration and reset..
- Communicate with door modules,body controllers, electronic modules. Support all OBDII protocols and 10 test modes including Freeze Frame, Enhanced Mode 6, Vehicle Info, I/M Readiness, On-Board Monitor and Component Tests.
Check Stock
Genuine DELL Intel 945 Express Socket 775 Motherboard For the Optiplex GX620 Small Form Factor (SFF) System Part Numbers: F8101, PY423, KH290
- Chipset: Intel 945 Express, Socket: LGA775, Other Features: Hyper-Threading Technology Support, Video: integrated Intel Graphic Media Accelerator 950 or PCI Express x16 graphics card.
- Network: Integrated network interface with ASF 1.03 and 2.0 support as defined by DMTFCapable of 10/100/1000, Audio: AC97, Sound Blaster emulation, 16-bit analog-to-digital.
- 20-bit digital-to-analog, Type: 533-MHz and 667-MHz DDR2 SDRAM, Memory connectors: 4.
- Memory modules supported: 256-MB, 512-MB, 1-GB, or 2-GB non-ECC, Minimum memory: dual-channel: 512 MB.
- single-channel: 256 MB, Maximum memory: 4 GB, 1 x PCI.
- 1 x PCI Express x16, Serial: 9-pin connector.
- 16550C-compatible, Parallel: 25-hole connector (bidirectional), Video: 15-hole VGA connector.
- Network adapter: RJ45 connector, USB: six USB 2.0–compliant connectors, Audio: three connectors for line-in, line-out, and microphone.
Check StockTeyleten Robot SG90 9G Mini Micro Servo Motor for RC Robot RC Mini Servo Helicopter Airplane Boat Controls 5pcs
- No-load running speed: 0.09±0.01 seconds/60° at 4.8V rotation angle: 120° stall torque (4.8V): 17.5oz /in (1kg/cm). Amplifier type: analog....
- Application areas: robotic arms, micro robots, dinghies, remote control helicopters, various R/C toy Arduino modules and experiments.
- Interface type: compatible with JR and Futaba interfaces..
Check StockASTRO Gaming C40 Tr Controller - PlayStation 4
- Ready for any environment, the TR line of ASTRO Gaming products deliver Premium design and performance for every type of Gamer.
- Optimum rear button layout for superior ergonomics improves Precision during Critical moments. Mappability streamlines the Controller for any genre and playstyle while improving response time.
- Quickly and easily swap the analog stick or d-pad modules for consistently sharp performance. Setup the Controller in either offset or parallel configurations.
- Quickly and easily activate the trigger stops, which adjusts the throw of your triggers, to allow hair-trigger performance in most FPS titles.
- The C40 TR Controller delivers high fidelity game sound and voice chat in wired and wireless mode via the 3.5mm jack. Compatible with any gaming Headset.
Check Stock
HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface
- This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology..
- Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient..
- For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor..
- A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works..
- Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers..
Check StockHigh-Precision AD/DA Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Add High-Precision AD/DA Functions to Pi. Onboard ADS1256 8-CH 24bit ADC and DAC8532 2-CH 16bit DAC
- There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
- Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate Onboard DAC8532, 2ch 16bit high-precision DAC.
- Onboard input interface via pinheaders, for connecting analog signal- the pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules.
Check StockSONICAKE Bass Effects Pedals Multieffect Preamp Compressor Boost Fuzz Octave Multi Effects Pedal Boom Ave With FX Loop
- One-Stop Gig Solution for Bass Players with Main Effects needed for the Bass Pedal.
- The bass pedal have Analog Preamp with 3-Band EQ recreates the Legendary Ampeg Style Tone, from Dynamic Clean to Classic Rock Bass Sound.
- Compressor, Boost, Fuzz Modules effects ready for Most Common Use in Bass Playing Scenes on the bass multi effects pedal.
- This bass multi effects pedal contain Octave Module Produces Notes One and Two Octaves Lower along with the Direct Signal for the Massive *Thickness....
- XLR Output for directly connecting to PA, Mixer or Audio Interface.
- FX Loop for Hooking up other Effects Pedals.
Check Stock
KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects
- Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
- This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
- This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
- This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
- 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock
Roland INTEGRA-7 SuperNATURAL Sound Module with 1 Year Free Extended Warranty
- Flagship synth module with over 6,000 sounds built-in The latest SuperNATURAL sounds with enhanced Behavior Modeling technology for expressive acoustic instruments and accurate reproduction of performance articulations Powerful SuperNATURAL synth engine with fat analog synth models and vintage filter types Dynamic SuperNATURAL drum engine with natural tonal change derived from Roland V-Drums Producer's "must-have" SRX Expansion sound library built in.
- Roland's INTEGRA-7 gives musicians a goldmine of the latest SuperNATURAL sounds and Behavior Modeling technology in a fast-access, fully stocked 16-part module.
- The powerhouse rack comprises a "greatest hits" collection of sounds from Roland's flagship keyboards and V-Drums modules, plus a coveted lineup from the legacy SRX library.
- It also introduces a new technology called Motional Surround, a 17-part ambience engine that lets you graphically control the distance and position of each part within 360-degree sound field.
- With the immense power of the INTEGRA-7, you can create amazingly realistic and detailed orchestral arrangements, immersive, spatial sounds, and so much more.
Check Stock
Magnetic Game Controller Necklaces, Matching Necklace for Couples, Best Friend Necklace, Friendship Necklace (White+Gold)
- Fully modular professional gamepad .Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
- New next-generation (NXG) mini-sticks: a longer lifespan, and greater precision.
- T-MOD technology and Hot Swap feature lets you swap a module with any other — at any point in a game.
- Extremely high-precision modules and action buttons, with minimal response times.
- Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
Check Stock
YUNGUI PCB Protoboard,3 Pack PCB Prototype Board Solderable Breadboard for DIY Electronics and Soldering kit(4” X 6”,Blue)
- ♔The material is all FR4 full glass fiber plate, all Copper foils are Tin-plating for strength,which can effectively prevent the pad from falling off..
- ♔The solderable breadboard contains 2 size hole diameter of 1mm/0.04”and 1.4mm/0.055”. PCB protoboard holes are Suitable for resistor,capacitor,AWG(American Wire Gauge),SWG (Stand Wire Gauge),and other Electronic Components..
- ♔PCB board is more suitable for analog circuits and discrete circuits,four mounting holes at the corners of the board are very convenient for installing them together..
- ♔Electronic parts and Electronic equipment replaced and Repaired include: LCD Modules, Optoelectronic Displays, Capacitors , Resistors , Potentiometers , LED Displays , Electronic Accessories & Supplies,Electronics Stocks,Ative Compent , Integrated circuit , Diode , Transistor..
- ♔Our Guarantee:Quality assurance,efficient service.Fast Shipping! We provide 30 day money-back and 12-months warranty. Please feel free to contact us if you have any question..
Check StockSparkFun XBee Explorer Dongle - Red
- UART communication board, XBee interface, USB interface.
- XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
- Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
- USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
- Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock
