Reviews American Coupler

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

Tapcooler Beer Valve Connector for Direct Keg Connection

  • ...ght to fit narrower space in your refrigerator.solves problems of clearance issues that a lot of standard tall couplers have Perfect for applications where limited vertical space makes it difficult to tap kegs..
  • COMPATIBILITY: This keg coupler is compatible with North American standard "D" system sankey brand kegs. Perfect for dispensing beer, soda, cider, wine and other carbonated drinks..
Check Stock

FERRODAY 8 Keg Pump D-System Keg Pump Complete US Beer Keg Pump for Sankey Keg Party Pump Heavy Duty Picnic Keg Tap Keg Hand Pump Draft Beer Kegerator Pump Easy Lock Water Keg Pump Soda Pump

  • 【Built to Last Pump & Faucet】: American complete pump tap system 8” D system coupler for Sankey keg. High-quality material, classic modeling,....
  • 【No Leaks From Connections】: Lever handle lock coupler with internal gasket provides air tight seal and no leaks.
  • 【Easy to Tap & Easy to Pump】: Highly reliable 8” cylinder picnic party pump with ergonomic ball end. It's easy to operate with a simple stroke....
  • 【Widely Used D System Keg Pump】: 8" American keg party pump D system coupler for Sankey kegs. Works with most North American beer kegs. Perfect....
  • 【Easy to Setup & Life Time Service】: Connects the pump directly to your keg, lock down the lever handle, squeeze the faucet trigger and enjoy your....
Check Stock

Heavy Duty Beer Party Hand Pump Keg Tap Sankey Kegerator D System 8 Inch and Extra Faucet

  • EXTRA plastic faucet included. This is part at end of rubber tubing you squeeze..
  • Use for dispensing keg beer. Will work on kegs such as Bud, Miller, Coors, Molson and other brands that use American D System couplers..
  • Stainless steel coupler probe, brass coupler body. Chrome plated brass pump body..
  • Hand pump operated. Securely lock the coupler onto keg with lever handle..
Check Stock

Kegco Beer Keg Coupler D System Tap Lever Handle

  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants.
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe.
  • This keg tap is compatible with all American “D” system sankey kegs and will be able to tap domestic brand beer kegs.
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
Check Stock

Non-Slip Rubber Padded Stainless Steel Drip Tray with Tower Cutout by Proper Pour

  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and....
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe.
  • This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs.
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
Check Stock

Lupulin Market LM-SANKEYD Beer Coupler, Sankey D, Stainless Steel Probe, Commercial Quality, Includes: 5/16" Barbs and Hose Clamps, D, Silver

  • Commercial grade Sankey ‘D’ Keg coupler for domestic brand kegs (I. E. Bud, Coors, miller, American craft beer)..
  • Nsf approved coupler that features a durable chrome plated brass body with a stainless steel Liquid probe..
  • Built in safety features include a pressure relief valve that is rated up to 53 psi (3. 7 bar)..
  • Comes with (2x) 5/16″ Tailpieces. Liquid and gas connections are standard beer nut threads (7/8″-14)..
  • Short black lever style handle that will fit into the smaller diameter kegs (tall 1/4 Barrel kegs)..
  • Threads are the standard beer nut so can use your existing beer and gas lines..
  • Included Components: Sankey D Coupler, Hose Barbs, Hose Clamps.
Check Stock

Nostalgia Electrics KRS2100RETRORED Kegorator Beer Keg Fridge, Red

  • Holds one full size 1/2 barrel keg, one 1/4 barrel pony size keg or two 5-gallon D system kegs.
  • Keg coupler fits D system valves and does not fit non-standard keg sizes.
  • Adjustable thermostat with interior temperature range of unit is 30-40-Degree F.
  • Includes empty 2.5-pound CO2 bottle, double meter regulator and drip tray.
  • Product Built to North American Electrical Standards.
Check Stock

Coldbreak Keg Coupler, Sankey 'D' Style (Fits USA Kegs), Stainless Steel Probe, Commercial Grade, 5/16" Tailpieces, Black Handle

  • Commercial grade sankey ‘d’ keg coupler for domestic brand kegs (i.E. Bud, coors, miller, american craft beer).
  • Nsf approved coupler that features a durable chrome plated brass body with a stainless steel liquid probe.
  • Built in safety features include a pressure relief valve that is rated up to 53 psi (3.7 bar).
  • Comes with (2X) 5/16″ tailpieces. Liquid and gas connections are standard beer nut threads (7/8″-14).
  • Short black lever style handle that will fit into the smaller diameter kegs (tall 1/4 barrel kegs).
Check Stock

LitKiwi 2PCS Stainless Steel 304 Beer Keg Coupler Fitting,Beer Line Connector Kit,Hex Nut 5/8'G Thread x 5/16' Barb Fittings,Suit for 5/16' ID Beer Line Hose with Clamps

  • ★【Great Marterial】Both the fitting and clamp were made of 304 High quality stainless steel which has high temperature ductility, low magnetic permeability,and low carbon content for greater resistance to corrosion..
  • ★【General Size】The Thread—5/8"G(BSP),suit for most American beer keg coupler,the 5/16" Barb suit for beer tube which the ID little less than 5/16",it is bigger than the general-purpose models on the market and can support larger traffic..
  • ★【Professional Design】The swivel nut make the installation easier and faster,the elongated Barb part allows the pipe to be installed deeper, and provides clamps to make the pipe fully stable and not easy to fall off..
  • ★【Wide Application】Use for most American beer keg coupler,connect line to shanks and couplers.Also can use for other scenes which need the 5/8"G thread to 5/16"barb fitting..
  • ★【Package Include】2PCS 5/8"G x 5/16" Barb fittings with 2PCS clamps.If you are not fully satisfied with our product, we will serve you whole heartedly..
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without sc....
Check Stock

Kegco KTS97D-W D System Ergonomic Keg Coupler with Lever Handle and Stainless Steel Probe

  • This Kegco keg coupler is compatible with all American D System Sankey kegs, allowing you to easily enjoy your favorite domestic beer brands straight from the keg.
  • Clickable lever handle clicks up and down to engage the keg, making it more convenient than conventional lever style keg couplers that need to be pulled out before being pushed down.
  • The keg probe is made of high-quality stainless steel that is resistant to chemicals, making it more sanitary than chrome plated brass keg couplers.
  • Kegco’s commercial-grade keg tap is constructed of durable 304 grade stainless steel that can stand up to use in demanding commercial environments like pubs, bars, and restaurants.
  • The keg coupler body features a 55-psi pressure release valve that allows you to easily let the pressure out of the keg.
Check Stock

Single Tap Ultimate Door Mount Kegerator Conversion Kit

  • ...cate both how much CO2 pressure is inside of the keg and how much CO2 gas is left in the cylinder..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
  • DELUXE CLEANING KIT: Our deluxe hand pump pressurized cleaning kit is a must-have to easily and effectively clean your beer lines – without the h....
Check Stock