Reviews Aluminum plastic Pipe Fitting

APDTY 156632 Heater Hose Heater Outlet Hose With Hose Clamps & Fitttings

  • Complete Pre-Assembled Heater Hose & Pipe Assembly.
  • Rubber Hose Ends, Aluminum Pipe, Plastic Fitting, & Hose Clamps Pre-Installed.
  • Mounts Under The Hood, Back By Firewall, Opposite From The Glovebox.
  • Match Vehicle To Compatibility Chart To Ensure Exact Fitment.
Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Bonbo Fuel Gas Cap with Brass Hose for Honda EU2200i EU1000i EU2000i EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT Generators, Upgrade Extended Run (Red)

  • Application - This fuel gas cap can be widely used in Honda EU2200i EU1000i, EU2000i, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT generators..
  • Function - As a fixed connection between plastic or rubber hose and pipe, this gas cap with brass hose fitting helps you add gasoline into generator within a safe distance, ensuring seal tight and no leakage..
  • Design - The brass hose fitting has a 1/4" male end for connecting to threaded pipe, conforming to National Pipe Thread (NPT) standard and the barbed fitting for a hose is equipped with a 1/4" inside diameter..
  • Material - The gas cap is made of premium CNC billet aluminum, finishing with stylish anodized red coat. And the hose fitting is made of top high quality and wear resistance brass, performing well even under extreme conditions..
  • Satisfaction Guarantee - Bonbo aims to provide best products and services for our customers. If you receive broken or defective gas cap and brass hose fitting, please contact us any time, we will compensate you with 1 year warranty or 30 days full refund..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

Joywayus 40PCS 3/8 Tube OD Brass Compression Insert Tube Fitting

  • Suitable for the outer diameter of the pipe:3/8"..
  • Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
  • Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..
Check Stock

Joywayus 40PCS 5/16\ Tube OD Brass Compression Insert Tube Fitting

  • Suitable for the outer diameter of the pipe:5/16"..
  • Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
  • Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..
Check Stock

Hydraulic Cylinder Jack Hydraulic Pex Pipe Aluminum Plastic Pipe Tube Crimping Tool CW-1632 Floor Heating Pipe Plumbing Pressure Clamp Super heavy load

  • Hydraulic crimping tool for connecting fitting with pipe..
  • Well balanced barycenter, little angled wire pressing head meet with human-machinery engineering theory, operation more easy..
  • All stressing parts made of special steel treatment with quenching..
  • For plastic pipes, PEX pipes, lead pipes and other accessories , copper header, stainless steel compression sleeve, aluminum, copper jacket cover..
  • Can be transposed mold, the same tools can be crimped into 16-32mm from the different specifications of pipe fittings..
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Hydraulic Cylinder Jack Hydraulic Pex Pipe Aluminum plastic pipe Tube Crimping Tool CW-1632 Floor Heating Plumbing Pressure Pipe Clamp 10T Super heavy load

  • Hydraulic crimping tool for connecting fitting with pipe..
  • Well balanced barycenter, little angled wire pressing head meet with human-machinery engineering theory, operation more easy..
  • All stressing parts made of special steel treatment with quenching..
  • Can be transposed mold, the same tools can be crimped into 16-32mm from the different specifications of pipe fittings..
  • For plastic pipes, PEX pipes, lead pipes and other accessories , copper header, stainless steel compression sleeve, aluminum, copper jacket cover..
Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • ...ree-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-like PVC furniture connectors. These 3/4 inch PVC fittings are entirely safe for use with children and pets..
  • MADE IN USA: All FORMUFIT 3-Way PVC Elbow fittings are proudly manufactured in the United States, using only domestically sourced, formulated, and engineered PVC resins. These 3/....
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • ...y used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized finish for corrosion protection. Features: anti-rust, waterproof, oil-proof..
  • Six-month warranty provides by SINTLY. If you have any questions, please contact us. ( NO INSTALLATION INSTRUCTIONS, Adjustable wrench is highly recommended.).
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ... +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock