Reviews Aluminum Ribbon Microphone

Nady RSM-5 Ribbon Microphone - Unique compact shape perfect for close miking includes microphone clip and soft cloth pouch

  • Low-tension 45mm long, 2-micron thick aluminum ribbon design with rich, warm, classic ribbon microphone sound characteristics and realism with fast,....
  • Unique compact shape for easy, unobtrusive microphone placement perfect for close-miking guitar amps, cabinets, brass instruments, strings, pianos,....
  • Supplied with a microphone clip and leather pouch.
Check Stock

MXL R144 Ribbon Microphone with Shockmount for Vocals Brass Horns Acoustic & Electric Guitars Guitar Amps Bundle with Blucoil Pop Filter 10-FT Balanced XLR Cable and 5-Pack of Reusable Cable Ties

  • DELIVERS SMOOTH MIDRANGE WITH NATURAL CHARACTERISTICS - The MXL R144 Microphone is equipped with 1.8-micron 47mm aluminum ribbon capsule. It offers....
  • CAPTURES MORE ROOM SOUND - The figure-8 polar pattern of R144 picks up your vocals, guitars, brass, and room sound. This gives your recording that....
  • SAFELY HANDLES LOUD SOURCES - R144 is equipped with high 130dB SPL handling so you can use this ribbon microphone for loud instruments such as horns....
  • OFFERS REDUCED RUMBLES - The included microphone shockmount prevents unwanted vibration and rumbles to pass through from the mic stand into MXL R144..
  • INCLUDES - MXL R144 Ribbon Microphone with Shockmount.
  • Carry Case. Blucoil Audio Microphone Pop Filter Double Layer Mask....
Check Stock

Royer R-10 Matched Pair Ribbon Microphone

  • Type: Large Ribbon Geometry (LRG) ribbon (velocity) Microphone.
Check Stock

Peavey RAB-1 Ribbon Microphone

  • Golden Age Project R1 Tube Active Ribbon Microphone - Aluminum Flight Case - External Power Supply - Mic-to-Power-Supply Cable - Original Box.
  • A low-noise 12AX7 tube amplifier that isolates the ribbon and gain make-up transformer from the outside world.
  • A stunning realism with the feeling of "being-there".
  • The typical large and mellow ribbon sound quality with a very smooth top end and an extended low end.
  • A fast and life-like transient reproduction.
Check Stock

Geistnote's Ribbon Microphone Transformer GN-C36 1:36 (1 Pack)

  • High-quality ribbon capsule reproduces frequencies from 20 Hz to 18 KHz, noise level of 17 dB, and a 135 dB maximum SPL for pristine sound quality.
  • Advanced ribbon mic technology with long, aluminum ribbon transducer for reproduction of signals with a wide frequency response and clear detail.
  • Figure 8 polar pattern, passive electronics, 300 Ohms impedance, and 3-pin XLR connector.
  • Ideal for acoustic instrument and guitar cab recording with handcrafted and hand-tuned ribbon element.
  • Sturdy and collapsible Microphone Boom Stand for studio or on-the-go recording included in the Photo Savings deluxe kit with more perfect add-on accessories.
Check Stock

Golden Age Project R1 MK2 Ribbon Microphone

  • The R 1 MKII is a high quality vintage style ribbon microphone.
  • Unique and natural sound that has been available in classical microphones like the RCA 44 and 77.
  • Very well suited for the recording of most sound sources like vocals, acoustic instruments, strings, horns, orchestras and choral groups and many live sound applications.
Check Stock

MANAYO In-line Microphone Pream, Mic Booster Preamplifier for Dynamic and Passive Ribbon Microphones (Black)

  • [Purpose]: Boost up the gain by 28db for your dynamic microphone or ribbon microphone to amplify your voice clearly..
  • [Directions]: You can connect it as follows: Dynamic/Ribbon microphone → XLR cable → MANAYO preamp → Audio interface with 48v phantom power.
  • Or you can plug the amplifier directly into your microphone and connect it to your interface with xlr cable..
  • [Notice]: Please make sure there is a 48v phantom power supply on your audio interface..
  • [Notice]: Please make sure that your microphone is a dynamic or ribbon microphone, this amplifier is not work with condenser microphone..
Check Stock

Golden Age Project R1 Active MKIII Active Ribbon Microphone

  • Unmatched natural & musical sound of a classical ribbon microphone combined with the constent sound quality offered by addition of active electronics.
  • The typical large and mellow ribbon sound quality with a very smooth top end and an extended low end.
  • A Bipolar/FET descrete low-noise amplifier with a low impedance transformer less output stage, powered by standard 48V phantom power.
  • It raises the level and isolates the ribbon and gain make-up transformer from the outside world.
  • Removable microphone cable and padded case included.
  • Switchable -10db pad and 100hz low cut filter.
Check Stock

ART AR5 ACTIVE RIBBON MICROPHONE

  • Passive ribbon microphone with state of the art ribbon element enclosed by top-grade Neodymium magnets.
  • 135 dB SPL Handling, Figure-8 Polar Pattern, 20 Hz to 16 kHz frequency response.
  • Tough and rugged all-metal enclosure, Gentle high-frequency boost, 3-pin XLR connector.
  • Suitable for Guitar Cabs, Drum Overheads, Brass, Woodwinds, Strings, Voice Over.
  • Enjoy a durable and sturdy 6” desktop microphone stand included in the Photo Savings value accessory kit.
Check Stock

Stagg Ribbon Microphone (SRM70)

  • A classic ribbon microphone featuring vivid, natural sound and quick transient response.
  • Perfect for vocals and a wide range of instruments, on the stage or in the studio.
  • Polar pattern: Figure-8 - Ribbon: Pure aluminium.
  • Sensitivity: - 52 dB +/- 2 dB (0 dB = 1 V / Pa at 1 kHz) - Frequency response: 20 Hz to 18 kHz - Output impedance: 350 ohms +/- 20 % (at 1 kHz) - Maximum sound pressure level: 148 dB (at 1 kHz ? 1 % THD).
Check Stock

Beyerdynamic M160 Double Ribbon Microphone - Hypercardioid

  • Unique double ribbon microphone transducer with hypercardioid polar pattern.
  • Excellent transparency and transient response.
  • Warm and natural sound.Microphone Frequency Response:40 - 18,000 Hz.
Check Stock

Stealth in-Line Mic Preamp, Active Booster for Dynamic and Ribbon Microphones - Reduce Noise and Add Clarity to Your Podcast or Livestream, by Coda Music Technologies

  • JUICE UP YOUR MICS: Use the Stealth preamp with your audio interface’s 48V phantom power to boost your Dynamic or Ribbon microphones with 28dB of ultra clean gain. Does not work with Condenser microphones.
  • safe for Ribbon and Dynamic microphones..
  • STAY CLUTTER-FREE: Get rid of an XLR cable. Connect the preamplifier directly to your microphone, or connect 2 cables and hide it discreetly out of the way. There’s nothing better than a well-organized studio to boost creativity..
  • SOUND QUALITY MATTERS: Reduce noise while adding microphone clarity with -70dB noise rating. You'll be able to cut through the mix without adding feedback or unwanted hiss and hum, while maintaining the pure sound of your mic..
  • MATTE BLACK & COMPACT DESIGN: The Stealth microphone preamp is compact and has a matte black finish that pairs perfectly with industry-standard microphones for a minimal and stealth aesthetic..
  • RELIABLE QUALITY: We are a team of musicians and pro audio engineers and we develop our products with our customers and our own needs in mind. Backed by our hassle-free guarantee, your satisfaction is our priority..
Check Stock

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm + Gimbal Cable Kit in CNC Aluminum for Professional/Advanced / 4K

  • Compatible with Phantom 3 Professional, Advanced, 4K.
  • Includes gimbal ribbon cable, yaw arm, set screw, hex wrench.
  • Anodized Silver to match original partsDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
  • CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
  • Painted silver to match original DJI parts.
  • Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
  • Tweezers (helps to manipulate ribbon cables and screws).
Check Stock