Reviews Aluminum Processing Machine

Happybuy Manual Wire Stripping Machine 0.06-0.98 inches, Wire Stripper Machine with Hand Crank Portable, Wire Stripping Tool Aluminum Construction,for Scrap Copper Recycling

  • Hand Crank Designed: designed with hand cranks,easy to operate.Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
  • Aluminum Alloy Material: Manual wire stripper with high quality lightweight construction made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety.
  • Recycle Your Copper: Suitable for removing the plastic and rubber insulation from undamaged scrap wire.You can recycle your copper wire, benefit from non-insulated pure copper wire.
  • Easy to Use ,Portable & Energy Saving: There is adjustable blade and rollers on the cable wire stripping machine, smoothly and good for any shapes Cable. When you use this machine to strip the wire whose diameter smaller than 3mm, please put the wire to the small hole on bottom.
  • Wide Application: This machine is automatic and the wire range is up to 25mm，widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.
Check Stock

uxcell Chucking Reamer 5/16\

  • GREAT QUALITY: These reamers are made of high speed steel, high hardness for rust protection, durability and long service life,with oxidation surface has good strength of extension and corrosion resistance in many environments..
  • MAIN FUNCTION: Applicable for reaming to mold processing and handicraft processing..
  • WIDE APPLICATION: Widely used for bore machining, installed in drilling machine, milling machine, etc..
  • MATERIAL: Processed surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • SHANK DIAMETER: 3/4/5/6/7/8/9/10/11/12mm..
Check Stock

SENDUO Manual Wire Stripping Machine Speed 50FT/MIN Wire Stripper Machine Wire Gauge Range 0.06-1inch Portable Copper Wire Peeler Machine for Scrap Copper Wire Cable Stripping

  • 【WIDE WIRE DIAMETER】- Our wire stripping machine has two feeding panels of four different sized feed holes, allowing wires in diameter from0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available..
  • 【BLADES ADJUSTABLE】- Blades with Thickness: 12mm(0.47") can be fast to change and Stripping Speed: About 50ft/min well performed. The adjustable blades and rollers on the cable wire stripping machine fit with all size wires with diameters from 0.06” (1.5mm) up to 0.98” (25mm)..
  • 【HAND-CRANK DRIVEN】- The wire stripper can be driven by winding the hand crank, smooth and easy to use. Also you can start a electric drill to power it for a convenient and fast working..
  • 【ALUMINUM & COMPACT】- This cable stripper has a compact and long lasting frame of aluminum alloy, lightweight with 3.8kg(8.38 lbs) to be portable and easy to use. It can be mounted easily to any bench or work station..
  • 【WIDE APPLICATION】- The wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries..
Check Stock

Micro 100 SFPM-050-10 Square End Mill - Upcut, 5 mm Cutter Dia, 16 mm LOC, 1 Fl, 5 mm Shank Dia, 50 mm OAL, Uncoated

  • END MILL CUTTER: Mill Cutter, usually used to be assembled on milling machine. Suitable for CNC data processing center, carved, high-speed machines..
  • WIDELY USE: Can milling of copper, aluminum, tool steel, cast iron, etc..
  • HIGH TOUGHNESS: High toughness, abrasion resistance, high-speed cutting for the high hardness..
  • EASY TO USE: Can processing directly or fine processing to the heat treatment mold..
  • SAVING TIME: Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time..
Check Stock

ele ELEOPTION Metal Mini Milling Machine DIY Tool Benchtop Wood Lathe Woodworking for Hobby Science Education Modelmaking AC100V~240V

  • 【Application】 Juvenile Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology....
  • 【Material 】Milling Machine Made of advanced aluminum alloy, durable and non-deformable for usage. The Milling is suitable for mini drill and drill....
  • 【Processing Materials】 Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN'T Processing Alloy.When processing harder materials, the feed rate....
  • 【Main parts】 The main components of the headstock, intermediate block, connecting block, vice, large slider, small slider, hand wheel, base and so....
  • Note: Please check the product description carefully, if you have more questions or don't sure about your needs, please contact with our service....
Check Stock

Wood Router,Router Tool Wood Trimmer Router Electric Hand Trimmer Laminate Milling Engraving Hand Machine Joiner Tool Electric for Slotting Trimming Carving 110V 800W 30000R/MIN

  • ...tion of the machine. Anti-vibration, practical, simple operation, durable..
  • 【High-precision and easy operation】-The transparent base allows you to clearly see the trimming and easy operation. The transparent base design has high precision and is easy to identify during processing. Adjustable knob, scale can be adjusted..
  • 【Stable and non-deformation】- It includes some accessories, such as wrenches, trimming guides, straight guides, etc. The trimming guide rail and the rollers run along the curve to ensure accurate cutting and fine curve processing. Linear guide rail, thicker model is stable, no deformation, linear processing stable wooden wrench can tighten router head..
  • 【Wide use】-This electric trimming machine is widely used in wood processing, cabinet processing, handicraft production, plastic board, wood veneer and other similar materials chamfering, grooving, surface treatment, curve cutting, wood edge planning, pattern processing Homework activities and DIY. Easy wood trimming and slotting..
Check Stock

FomaSP Carbide Inserts for Aluminum WNGG431 / WNMG080404 for Turning Cutting Tools 10 PCS

  • Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality.
  • Size(I.W): 12.7mm, Thickness(S): 4.76mm, Dimension(Φd): 5.16mm, Radius(R): 0.4mm.
  • Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing.
  • Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15..
  • Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting..
Check Stock

6061-T6 Aluminum Sheet, Aluminum Plate,6 Inch x 12 Inch x 0.315 Inch Thickness

  • Aluminum plate 6061 T6 ：12（L）x6(W)x.315(thick) in.
  • Cutting flat: professional cutting machine cutting, saw smooth smooth, no burrs on the edge. The normal tolerance is 1-3mm.
  • Inside and out:The surface is smooth and flatness is high, the naked eye can not see the inside of the factory through a variety of instruments strictly tested, such as direct reading spectrometer, ultrasonic flaw detector, hydrogen detector, cross section scanner, scanning electron microscope..
  • Overview of Aluminum Sheet:6061 T6 has excellent processing performance, excellent welding and electroplating characteristics, good corrosion resistance, high toughness and no deformation after processing, dense materials without defects and easy polishing, easy to color film, excellent oxidation effect and other excellent characteristics..
  • Widely used: Aluminum Sheet 6061 T6 used in decoration, packaging, construction, transportation, electronics, aerospace, weapons and other industries..
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

Zouzmin milling Insert APKT160408 for Steel and Stainless Steel for BAP400R milling Inserts Holders milling CNC Tools

  • Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality.
  • Size(IC): 12.7mm, Thickness(S): 4.76mm, Dimension(Φd): 5.5mm, (L): 16mm, (R): 0.8mm.
  • Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing.
  • Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15..
  • Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting..
Check Stock

LENJKYYO 4Axis CNC 6090 Router Engraving Machine 1.5KW, USB Engraver VFD Drilling Milling Machine for Wood Working and Advertising Signs Bronze Plate Circuit Boards w/Remote Controller

  • ★The 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood..
  • ★Water cooling spindle works more stable and durable. Anti-blackflash,high precision,long life circle..
  • ★High quality accurate ball Screws drive make the engrving more precision..
  • ★Woodworking industry: sculpture, round carving, wooden handicraft processing.
  • Advertising signs: logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products..
  • ★The engraver could do shadow-carved, sculpture which widely used in the gift industry.
  • can be used in aluminum cutting industry,such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter , making plastic light box model.
  • also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet..
Check Stock

Ziqi 6061 T6 Aluminium Metal Sheet 12 x 12 x 1/8 Inch Thickness Flat Plain Plate Panel Aluminium Metal Sheets Plate Finely Polished and Deburred

  • 【6061-T6 Aluminum Metal Sheet】Corrosion-resistant aluminium alloy, good processability and weldability, medium strength, 1/8 Inch Thickness.
  • 【Overview of 6061】 6061 metal sheet has excellent processing performance, excellent welding and electroplating characteristics, good corrosion resistance, high toughness and no deformation after processing, dense materials without defects and easy polishing, easy to color film, excellent oxidation effect and other excellent characteristics.
  • 【Forging】6061 aluminum sheets can be forged at temperatures in the range of 750°F to 900°F. Hot working may be done in the temperature range of 500°F to 700°F.
  • 【Cutting flat】12x12 Aluminum sheet use professional cutting machine cutting, saw smooth smooth, no burrs on the edge. The normal tolerance is 1-3mm.
  • 【Widely used】6061 Aluminum plate used in decoration, packaging, construction, transportation, electronics, aerospace,and other industries, Use indoors or outdoors.
Check Stock

Compact Wood Router Tool 110V Electric Hand Woodworking Trimmer Palm Router kit with Gloves 15 PCS Router Bits (800W)

  • 【High Quality】The hand-held woodworking trimmer is made of high-quality aluminum and plastic, with a built-in 800W powerful copper motor, and the motor speed is 30000rpm..
  • 【Accurate Scale & Transparent Base】The portable woodworking trimming machine has a scale for more precise processing. The transparent base can clearly observe the wood processing and prevent flying wood chips..
  • 【Easy to Operate】One-button toggle switch, simple and quick operation. Thicker model with low noise, straight line guide, processing more stable..
  • 【Comfortable Grip】The non-slip rubber handle makes it more comfortable to hold and reduces fatigue from long-term work.Comes with a pair of protective gloves to make the operation safer..
  • 【Application】It is suitable for chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing of wood, cabinet processing, handicraft production, plastic board, veneer and other materials..
Check Stock