Reviews Aluminum Pcb

YMDK Wholesales GH60 64 Anodized Aluminum CNC Case for GK64 DZ60 Type C GK61 Idobo 75 ID75 XD75

  • This link is only aluminum case which CNC Anodized.CNC Feet Included.
  • Compatible with GK64 GK61 PCB,GK61 64 Plate need to replace with gh60 plate.
  • New Type PCB GK64x GK64xs GK61x GK61xs support as well.Just need a GH60 plate is ok..
Check Stock

Circuit Board Holder with Adjustable Heavy Duty Base Large Soldering Helping Hand Vise 360° Rotated For Clamping PCB solder DIY Printed Circuit Board Stand NEWACALOX

  • Non-slip PCB clips: The PCB clips on the holder is easy flips printed circuit boards 360°, use better elasticity springs to avoid slipping, easily....
  • Sturdy construction and easily adjusted. The Soldering helping hand holder is made of aluminum alloy and has 3 screws to tighten and fix, heavy and....
  • Equipped with 4 rubber feet under the base ensure stability, so the holder will not slide around on the bench. keeping safe. the base is solid and....
  • Adjustable PCB holder frame: The rolling bearing makes the bracket move more smoothly without jamming, the ability to rotate is great for switching....
  • Easy to Install and easy to use: It is very convenient to insert the pcb board and easy to remove. You could make any position adjustment you want by....
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Black

  • Black anodized aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Nickel

  • Nickle plated aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

Strobe Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Check Stock

Hammond Manufacturing 1553AGY 1553 MINI SOFT TOUCH CASE

  • 【Brand New】100% brand new high quality right electronic DIY aluminum box, strictly full tested to ensure the best quality before shipment, safe to use.
  • 【Application】Can be used for heat dissipation aluminum shell of electronic products, PCB junction aluminum box, anti-thunder protection aluminum case, DIY, etc..
  • 【Features】Using machine die-casting integrated molding, the surface is oxidized for beautiful appearance.
  • 【Easy Installation】Professional design and compact structure, convenient to use and not easy to damage. With complete accessories, easy to install and remove.
  • 【High Quality】Adopt high quality aluminum material, good heat dissipation and shielding signal performance.
Check Stock

60 Pieces Pin Vises Hand Drill Bits Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood,Jewelry, Plastic etc

  • 【Package Contant】1 piece pin vise hand drill, 48 pieces of micro twist drill bits (0.5-3.0mm), 10 pieces of PCB mini drill bits (0.3-1.2mm), and 1 piece bench vise..
  • 【Pin Vise】Made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
  • 【48 Pieces Twist Drill Bits 】Include 3 Pieces of 0.5，0.6，0.7，0.8，0.9，1.0mm size, total 18 piece.
  • 2 pieces of 1.1，1.2，1.3，1.4，1.5，1.6，1.7，1.8，1.9，2.0mm size, a total of 20 pieces.
  • 1 piece of 2.1，2.2，2.3，2.4，2.5，2.6，2.7，2.8，2.9，3.0mm size, a total of 10 pieces.
  • 【10 Pieces PCB Drill Bit】PCB mini drills are made of tungsten carbide, the shank diameter is approx. 3.175 mm, overall length is approx. 38 mm, which fit for processing PCB, normal FR-4, CEM-3 boards, SMT, CNC, molds, plastic, circuit board, carbon fiber, composite board and so on.
  • 【Fit dimension】 the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.
Check Stock

Fenlink 2.5" to 3.5" Internal SSD Hard Drive SATA Drive Converter

  • Fenlink 2.5″ to 3.5″ SATA Drive Converter: Turns your 2.5 inch SATA HDD / SSD into 3.5 inch so you can install it into your desktop PC and Apple Mac Pro models.
  • Superb Quality:Immersion Gold PCB manufacturing process using reasonable PCB layout design, stable transmission rate.
  • Excellent Performance: SATA III standard supports a theoretical maximum speed of 6Gbps, also backward compatible with SATA I/II.
  • Good Heat Dissipation: Open design allows for full air flow for proper drive cooling, Aluminum Alloy frame design and protects your hard drive.
Check Stock

Extruded Aluminum Enclosure Kit Silver for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

  • High-quality custom aluminum enclosure for Ham It Up v1.3.
  • Metal case helps to protect PCB from stray EMI, improving sensitivity..
  • Includes all required hardware to mount your PCB!.
  • Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined..
Check Stock

Extruded Aluminum Enclosure Kit Blue for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

  • High-quality custom aluminum enclosure for Ham It Up v1.3.
  • Metal case helps to protect PCB from stray EMI, improving sensitivity..
  • Includes all required hardware to mount your PCB!.
  • Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined..
Check Stock

DNYSYSJ 1500W CNC Router Engraver Machine, 6040 3Axis USB Engraving Drilling Milling Carving Machine 3D Carving Desktop Machine DIY Artwork Woodworking

  • ★【It can work with various materials(metallic & non-metallic)】Such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. The machine can connect with computer as other external device such as printer, scanner. With the assist of the ROUTER 6040T, your design idea will be real-time display..
  • ★【Water cooled spindle motor】It can work longer time than air cooled motor.Water cooled spindle motor has higher stability and better concentricity than air cooled motor,water cooling spindle works more stable and durable.(tips：1. The spindle motor must connect with the VFD.)The mini router Frame is movable..
  • ★【It can used for engraving】Advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc..
  • ★【Wide Range of Applications】This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Pla....
Check Stock

ODOMY 57pcs Pin Vise Hand Drill Bits Mini Hand Drill Rotary Tool,46pcs 0.3-3.0mm Micro Twist Drill Bits and 10pcs PCB Mini Drill Bits for Resin Plastic Wood Jewelry Making

  • Practical and Portable: The hand-held drill is easy to carry or store in a toolbox or pocket, making your daily work more convenient, suitable for electronic assembly, tools, model making, winding, home decoration, etc..
  • Pin Vise Hand Drill: Aluminum alloy, sturdy and durable, its tail can be rotated, sturdy and easy to operate, Ideal for making pilot holes when fixing small item that you can’t hold eg plastic sleepers on the track..
  • You Will Receive:A total of 57 pieces of electric hand drill set for you to do hand-carving DIY work, Twist drill bit: 0.3-3mm, PCB micro drill: 0.1mm-1mm, Vise: 3.5*0.6inch..
  • PCB micro drill: PCB micro drill is made of tungsten carbide, suitable for processing PCB, ordinary FR-4, CEM-3 board, SMT, CNC, mold, plastic, circuit board, carbon fiber, composite board, etc..
  • Micro twist drill: The micro drill is light in weight and compact in size. It does not take up extra space. It is used to process wood, plastic, rubber, PVC, walnut, model, bone, angle steel, amber, olive, fiberglass, and other materials..
Check Stock

Delfield 3516459 3.00 X 7.00 Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
Check Stock