Reviews Aluminum Metal Machining Parts

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

  • Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

60W 12000RPM Mini Milling Lathe，100-240V DIY Mini Lathe Mini Miller，Mini Metal Lathe DIY Miniature Milling Machine Miller

  • ✔〚Specification〛: ⓵Motor Speed :12,000rpm ⓶Input voltage/current/power:12VDC/5A/60W ⓷Axis Y and Z Travel: 32mm ⓸Axis X Travel: 145mm ⓹Collet: 1-6mm ⓺Maximum Clamping Size of Vice: 50mm ⓻Working Material: Lignin plastic, soft metal (gold, silver, copper, aluminum etc.), acrylic, plastic, etc.
  • ✔〚Main parts〛: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal..
  • ✔〚High precision〛: Maximum motor power is 144W by using more powerful motor. Motor case and headstock are jointed.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ✔〚!!!NOTE!!!〛: Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it..
Check Stock

Acerbis Fuel Tank 3.2 Gallon Black - Fits: Honda CRF450R 2005-2008

  • 1.Inner diameter(thread) is1.93''(49mm),pls measure your tank before ordering.
  • 3.Please measure the outer diameter of your tank opening.
  • 4.Universal parts, will fit most Dirt Bikes, Pit Bikes. Comes with one aluminum Vent Cap.
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

SÜA - Aluminum E4043 Stick Electrode Rod 3/32\ x 14\ - (1 Lb)

  • ...oval of oxides, the characteristics of the joints are particularly good. Good capillary fluidity..
  • Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates..
  • These Electrodes are 14 inches long and are available in Sizes: 3/32.
Check Stock

JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder

  • Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
  • This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
  • Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
  • Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
  • Silver parts are made of aluminum, The black part is made of iron.
Check Stock

1-1/8\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

1-1/2\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • ✿ 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • ✿ 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • ✿ 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • ✿ Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • ✿ The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

RC Drift Car 1/24 2.4GHz 4WD Remote Control Sport Racing On-Road Vehicle with LED Light, Batteries and Drift Tires (Blue 460)

  • ZD Racing launched a 1/16 full-proportional controller four-wheel drive track flat sports car.
  • The full-scale re-engraved car shell is equipped with LED ambient lights.
  • A large number of metal structural parts are used, and the hollow and high-gloss design can effectively reduce the weight of the body, enhance the strength of the body, and have a full metal texture.
  • Aluminum alloy CNC precision machining bottom plate, hollow design.
  • effectively reduce the weight of the body and enhance the strength of the body.
  • The whole car adopts refined steel drive shaft, precision high-speed bearings, and high-strength gear power transmission system, which is not afraid of speed. Easily achieve indoor/track drift racing, bringing a super visual feast.
Check Stock

10 Pieces 1/2\ Aluminum 6061 Round Rod 14\ Long +/-.07\ Solid T6 Lathe Extruded Bar Stock .50\ OD

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock