Reviews Aluminum Machining Parts

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

  • Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..
Check Stock

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

Acerbis Fuel Tank 3.2 Gallon Black - Fits: Honda CRF450R 2005-2008

  • 1.Inner diameter(thread) is1.93''(49mm),pls measure your tank before ordering.
  • 3.Please measure the outer diameter of your tank opening.
  • 4.Universal parts, will fit most Dirt Bikes, Pit Bikes. Comes with one aluminum Vent Cap.
Check Stock

SÜA - Aluminum E4043 Stick Electrode Rod 3/32\ x 14\ - (1 Lb)

  • ...oval of oxides, the characteristics of the joints are particularly good. Good capillary fluidity..
  • Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates..
  • These Electrodes are 14 inches long and are available in Sizes: 3/32.
Check Stock

JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder

  • Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
  • This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
  • Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
  • Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
  • Silver parts are made of aluminum, The black part is made of iron.
Check Stock

1-1/8\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

1-1/2\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • ✿ 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • ✿ 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • ✿ 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • ✿ Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • ✿ The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

10 Pieces 1/2\ Aluminum 6061 Round Rod 14\ Long +/-.07\ Solid T6 Lathe Extruded Bar Stock .50\ OD

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

RiToEasysports 2Pcs Universal RC Servo Arm,25T Steering Gear Arm Servo Arm for 1/10 RC Car (Silver)

  • ¡¾Durable And Sturdy¡¿Made of high quality aviation aluminum alloy material, durable, long service life.Hard aluminum construction for precision and durability..
  • ¡¾Compatible With¡¿Special designed for 1/8 1/10 RC car model, 31 x 10mm / 1.2 x 0.4in of the accurate size.Compatible With TRX4..
  • ¡¾Easy to Install¡¿Small size, light weight, no extra burden, and easy to install and disassemble..
  • ¡¾Stable Performance¡¿CNC machining makes it accurate size, stable performance, with high strength and durability and not easy to deformation..
  • ¡¾Wonderful Upgrade Parts¡¿25T servo arm provides cushioning and protection for your RC car model, wonderful upgrade parts..
Check Stock

Seymour STR-662 1\ STA-LOK Repair Kit

  • Easy to use,convenient to operate,saves effort and time in use..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
Check Stock

Framed Standard BMX Bike Fork Sz 20in

  • ?FUNCTION?The chainwheel screws bolts nut parts is used to fix the the crankset and crank of the chain wheel. Fit for single dental plate..
  • ?FINE WORKMANSHIP?Fine design with precise machining, the bolt set fit crank perfectly and offer professional fixation of crank..
  • ?MATERIAL?The crank bolts set is made of high quality 7075 aluminum alloy with coating, high strength, anti-rust, colorfast, lightweight, durable..
  • ?PACKAGE INCLUDE?The package includes 5 pairs of screws and nuts. Great accessory for cycling enthusiasts..
  • ?GUARANTEE?If you are not satisfied with our product you received, you can send emails to us at any time. We will reply you instantly and help you solve your problem..
Check Stock

Mako Universal Picatinny Rail Mount Fits Most Pistols

  • Easy to install, additional machining may be required for some models.
  • Accepts all sights designed to fit a standard Picatinny rail.
  • Easy to install.Additional Machining May Be Required For Some Models.
Check Stock