2 Pieces Graphite Ingot Mould Crucible Mould for Casting Gold Silver Metal Aluminum Copper Brass Melting Refining (4 x 2 x 1 Inch)
- ...nd save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance.
- Widely applicable: the mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on.
- Considering the size of this product, it is more suitable for small-capacity metal melting.
- Ingot mould size: 1KG graphite ingot mould outer is 100 x 50 x 25 mm/ 4 x 2 x 1 inch, inner is 90 x 40 x 20 mm/ 3.54 x 1.6 x 0.8 inch.
- 2KG graphite ingot mould outer is 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch, inner is 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch, melting and casting metals like gold, silver, brass, aluminum, copper, zinc, plumbum, and more.
- The capacity is an approximate volume is 1 kg hold or 500g silver.
- What you receive: there are 2 pieces of graphite ingot moulds in this package include 2 different size, enough quantity for you to use, improving your work efficiency in daily life.
Check StockGONGYI High-Purity Graphite Ingot Molds Mould for Melting Casting Refining Metal Copper Gold Silver Aluminum Brass #1-0.65kg-35ml-1.18fl. oz
- Specification: For 665g Gold / 320g Silver.
- Selected Material: Graphite ingot molds are made from high density fine grain graphite, 99.95% Graphite. Ash content less than 0.1%. Better for Refining than Silicon Carbide Graphite Crucibles..
- Well-made: The smooth cavity finish of the graphite ingot mold makes the ingot very easy to remove without sticking to the mold itself..
- Wide Application: The graphite ingot mold receives liquid metal of precious metals and other types of metals, such as gold, silver, metal, aluminum, copper, brass, zinc and so on, and conserves them until they are solidified.
- Extremely Durable: Great alkali resistance and corrosion, super acid and impact resistance..
Check StockGraphite Ingot Mold, 60ml Capacity Crucible Mould, 2Packs Metal Casting Molds for Casting Melting Refining Gold Silver Aluminum Copper Brass Zinc Plumbum and Alloy (4\x2\x1\-1000g Gold; 540g Silver)
- ... withstand up to 3600°F (2000 ℃). Strong acid and alkali resistance, good corrosion resistance, impact resistance, 75MPA compression resistance, and 55MPa flex resistance..
- [WIDE APPLICATION] - The metal casting molds can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, lead and more. The ingot molds can also work as graphite crucible for melting into non-ferrous metals, test analysis, or other purposes..
- [WARM TIPS] - Pure graphite crucible can NOT be heating by carbon furnace or charcoal kiln. If so, the metal casting molds will soon be oxidized and cracked. Pure graphite will start to oxidize at 752 °F (400 ℃). The withstand temperatures of graphite crucible can be 3200 °F in Air Electric Furnace and 5000 °F in Vacuum or Gas Protection Furnace..
Check Stock4 Pieces Graphite Ingot Mould Crucible Ingot Casting Mould Silver 1 KG Gold Ingot Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining (90 x 40 x 20 mm)
- ...ood acid and impact resistance, good alkali resistance and corrosion resistance, 89 MPA compressive strength and 48.7 MPa flex resistance.
- Various applications: this graphite casting mould has a wide range of applications, it is suitable for experiments and melting of non-ferrous metals, such as gold, silver, metal, aluminum, copper, brass, zinc and so on, and it also can be applied for experimental analysis after graphite crucibles are melted into non-ferrous metals, as the ingot mould and other purposes.
Check Stock2 Kg Graphite Ingot Mold Silver Gold Ingot Mould Casting Ingot Crucible Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining, 85 x 45 x 30 mm (2)
- They are durable and sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
- Multiple purposes to meet: these graphite ingot molds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more, also ideal for satisfying lab, test analysis and other purposes.
- Taking the product size into account, small-capacity metal melting projects will be more suitable.
- Characteristics of moulds: these metal casting ingot crucible moulds are completed with exquisite craftsmanship and possess general purpose, can meet your daily needs.
- They are endowed with thermal stability, fast heating and cooling ability, nice corrosion resistance to strong acid and alkali, their thermal conductivity can shorten melting time and save energy, they are able to withstand the temperature of 2000 degrees Celsius without affecting the mold.
- Nice metal casting experience: the inner surface of high purity graphite melting mold is smooth, so you can easily pour out the residual metal and reduce waste, try to use it to possess your metal into geometric shape, and achieve your purposes for metal casting, melting or refining.
Check StockGraphite Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass (40 x 40 x 45 mm, 1000 g Gold/ 500 g Silver)
- ..., nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance, nice impact resistance performance to ensure the reliability of product quality.
- Wide uses: this ingot mould is suitable for experiments and melting of non-ferrous metals, such as gold, silver, brass, copper, aluminum zinc, lead and so on, also can be applied as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes.
- Taking the size of the product into account, small-capacity metal melting are more suitable.
- Package contents: you will get 1 piece of graphite ingot mold with exquisite craftsmanship and versatile usages, which can meet your daily needs.
- You can also invite your friends or family to enjoy handmade fun.
Check StockBLACKHORSE-RACING Universal 800ml Car Radiator Coolant Overflow Oil Catch Tank Cooling Catch Bottle Overflow Reservoir Heatsinks Aluminum Billet Silver
- ▶[Keep Engine Clean] Capture the oil and moisture in the helium and reduce the dirt and oil in the engine in the intake system. Keep the engine clean, increase horsepower and maintain engine life..
- ▶[Prevent Oil Leakage] Tight sealing cover, full Tig welding, thread with O-ring gasket, maintain a good closed environment to prevent oil leakage..
- ▶[6061 Aluminum Ingot] Made of high quality thick aluminum ingot, enhanced strength, anodized and polished, durable and long-lasting..
- ▶[Removable Cap] The fuel tank cap can be opened when the oil in the tank is full. Waste oil and dirt in the barrel can be poured out and reused..
- ▶[Quick Installation] Easy to install on the exhaust pipe of the original car, away from heat. Secure with a clip and try to keep the entire pipe in a vacuum..
Check StockTin Ingot 2 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper
- ✔️ Tin Ingot (2 pounds | 99.9+% Pure) Our 2lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 2lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 8lbs total, simply add a quantity of 4 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
- ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
- ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
- ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
- ✔️ PACKAGING - This 2lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..
Check StockTin Ingot 4 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper
- ✔️ Tin Ingot (4 pounds | 99.9+% Pure) Our 4lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 4lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 12lbs total, simply add a quantity of 3 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
- ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
- ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
- ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
- ✔️ PACKAGING - This 4lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..
Check StockDouble Burner 15 KG Gas Metal Melting Furnace Propane Forge Casting Tool
- 【YAY! ENJOY THE MELTING! 】-Turning waste into treasure, 6KG of crucible capacity means you can direct smelting of CPU's for gold and precious metals recovery or turn those old aluminum cans into $.We help you convert those scraps of copper and rotten iron into beautiful works of art, and the value will be increased by a hundredfold immediately..
- 【POWERFUL HEAT PERFORMANCE】-Equipped with a single burner with 250000W/H power and adjustable 30 psi regulator propane maintains to maximize heat efficiency. Propane melting furnace can be heated up to 1300 °C / 2372 °F and can melt metals with a melting point below 1300 ° C in 15-20 Minutes such as gold, sterling silver, pure copper, and aluminum..
- 【TWO COMPACITY FOR FLEXIBILITY】-Large - 6KG of LARGE crucible capacity means you can melt more anything such as 12KG gold,7KG silver,6KG copper,1.6KG aluminum.Small- After melting into a pure metal liquid, an object is definitely needed to contain this high-temperature substance, so we intimately provide a 113ML Graphite Ingot Mold..
- 【OUTSTANDING HEAT INSULATION】-We beat the competition with 2" ceramic cotton + 1" refractory than competitor’s thin ceramic cotton version. Coated with our special refractory it can hold 2600° Fahrenheit (1425° Cel....
Check StockPure Soft Lead Ingot
- ✔️ PEWTER INGOT 2LBS - 97LF - 97% TIN | 2.5% Bismuth | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up of 97% Tin, 2.5% Bismuth, and 0.5% Copper. This is lead-free pewter and is very good to use for casting. We sell this Pewter in ingot form as shown in the product images. This type of Pewter is also known as Britannia Alloy. Be sure to see our promotional discounts for certain quantity levels if you would like to save money. MADE IN THE USA..
- ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used often in jewelry making and also making utensils, teapots, candlesticks, urns, maces, and drinking vessels. This item is one of our best sellers because of its versatility and ease of use..
- ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
- ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 92%, BISMUTH 2.5%, COPPER 0.5%..
- ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed in heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb ingot is guaranteed to be 2lbs plus or minus 4%..
Check StockGraphite Ingot Mold Melting Casting Mould for Gold Silver Metal (85x45x30mm - 665g Gold/320g Silver)
- 【Ingot Size】For 665g Gold / 320g Silver.
- Inner 2.56x 1.18 x 0.78 inch (1.18 fl oz). Melting and casting metals such as Gold, Silver, Brass, Aluminum, Copper, Zinc, Plumbum, etc..
- 【Composition:】99.95% Graphite. Ash content less than 0.1%. Better for Refining than Silicon Carbide Graphite Crucibles..
- 【Warm-Tips】Pure graphite crucible can NOT be heating by carbon furnace or charcoal kiln. It will be oxidized and cracked.
- Pure graphite will start to oxidize at 752 °F (400℃). The withstand temperatures can be 3200 °F if you use Air Electric Furnace. The withstand temperatures can be 5000 °F if you use Vacuum or Gas Protection Furnace..
- 【Package】1x Graphite Casting Melting Ingot. Well Packaged to ensure the item will be safely delivered..
Check Stock7 Pieces Graphite Torch Melting Casting Kit, Including 2 Graphite Crucible Stir Stick, Graphite Casting Mould 5-in-1 Graphite Casting Ingot Mould, Quartz Crucible, Cylindrical Graphite, Tong for Melt
- ...quartz crucible approx. 7 cm in diameter, 2.5 cm in height, tong about 10 inch in length, cylindrical graphite measures approx. 4 cm in diameter, 4 cm in height.
- Multipurpose: these graphite ingot moulds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more, also ideal for satisfying lab, test analysis and other purposes.
- Taking the product size into account, small-capacity metal melting projects will be more suitable.
- Reliable to use: high-density graphite materials, bring you nice using experience, and long time for you to apply, not easy to break or deform, you can also share them with your friends or family members.
Check Stock