Reviews Aluminum Bronze Bushing

Wellbody 3 | Heated Massage Gun | Deep Tissue Massaging Device | Heatball Technology | Quiet Handheld Portable | Massage Tool for Muscles | All Aluminum Powertrain

  • ...LESS MOTOR- We custom built a high-performance brushless motor that is designed specifically to withstand the rigors of day-to-day, high-speed vibration. We then made sure to properly secure the motor so it won’t loosen or vibrate and will stay quiet over time, a problem with virtually all other massage guns..
  • ALL-ALUMINUM PRECISION POWERTRAIN-Fully made of premium ADC–12 aluminum. There are no plastic powertrain parts, period! Being all aluminum means all components expand and contract in unison when subjected to the heat and friction that is inevitable in a massage gun. This all-aluminum design dramatically reduces the system fatigue that leads to increased noise and premature system failure..
  • EXTRA-LONG ALUMINUM BRONZE BUSHING - WellBody uses an extra-long aluminum bronze bushing (bearing sleeve) which increases overall contact with the reciprocating shaft to provide greater stability and efficiency, which reduces wear and noise. Aluminum-bronze is a material known for its low coefficient of friction and superior glide ability, and, because it is metal, it will not distort..
  • DEEPSPEED- The Holy Grail in massage gun performance is speed at amplitude. Thanks to our all-In all-aluminum powertrain, state-of-the-art design and precision engineering, w....
Check Stock

Penn State Industries PKEDCSS DuraClick EDC Click Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (5) DuraClick EDC Click Ballpoint Pen Woodturning Kits. You will receive (1) of each in 303 Stainless Steel (PKEDCDST), C3604 Brass (PKEDCDBR), 6061-T6 Aluminum (PKEDCDAL), Burnt Bronze Anodized 6061-T6 Aluminum (PKEDCDBB), and Black Anodized 6061-T6 Aluminum (PKEDCDBAL)..
  • Also includes the bushing set (PKSPCL3BU) needed to make the pens.
  • Features an 8mm single tube design, a Schmidt SKM-88 click mechanism, and a Parker style ballpoint refill. Minimum blank size needed to turn is 3/4" x 3/4" x 3"..
  • The pen end includes a tactical designed knurling which is also featured on the pen tip. The pen clip on all finishes is crafted from raw 303 Stainless Steel..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Hengha Golf Cart Inductive Throttle Sensor Fits for EZGO DCS TXT PDS Medalist 1994+ Electric 25854G01

  • 1.This product suitble for Club Car(DS/IQ)1981-up gasoline and electric..
  • 2.Package Contents: 1. 2 x King Pin Assembly OEM#1016386/1010121 2. 2 x Upper bronze bushing OEM#8067 3. 2 x Lower bronze flanged bushing OEM#7048 4. 2x thrust bearing washer OEM#1010150 5. 2 x king pin wave washer OEM#1016389.
  • 3.Our products are well manufactured and match perfectly..
  • 4.It takes time to replace ASM spindle kits, which can not only improve the stability of your golf cart, but also exercise your practical ability..
  • 5.We are committed to providing you with high-quality service. If you have any demand or question for products, please contact us. Thank you!.
Check Stock

Danco, Inc. 89487 Lift and Turn Bath Trim Kit, 1-Pack, Oil Rubbed Bronze

  • EASY BATHROOM FIXTURE UPGRADE: Oil rubbed bronze finish trim kit provides a stylish elegant look to your tub shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Michigan Motorsports LS1 LS3 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 LSX LQ9 LS2 LS3 LS7 Trunnion

  • Includes 16 Trunions, 32 Bushings, 32 Circlips.
  • Fits all OEM LS Rocker Arms. Replacement Trunnion Kit for LS Engines.
  • Micro-polished hardened shafts with C932 bearing bronze bushings.
  • LS1 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 6.2 LSX LQ9 LS2 LS3 LS7 Trunnion.
  • Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

Pertronix D133700 Flame-Thrower Plug and Play Vacuum Advance Black Cap Billet Electronic Distributor with Ignitor II Technology for Ford FE 352-428

  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
  • Our Billet I2 distributors ship with Ignitor II modules factory installed.
  • Each billet distributor is hand polished and buffed to a high luster.
  • Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
  • Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
Check Stock

BESTILL Bathtub Drain and Overflow Faceplate Oil Rubbed Bronze

  • BESTILL Lift and Turn Bathtub Drain, Solid Brass Construction, Ensure Quality and Long Lifetime..
  • The Drain Stopper Fits US Standard Bathtub Waste with Diameter 1 3/8" or 1 1/2" Drain Hole..
  • Brass Overflow Cover is Single Hole Style, Easy to Work with Universal Bathtub Waste with Top Elbow..
  • Oil Rubbed Bronze Tub Drain Kit, Matches Your Oil Rubbed Bronze Bath Fixtures..
  • Drain Plug, Rubber Gaskets, Threaded Adapter Bushing, Overflow Face plate, Screw and Installation Included, Easy to Install..
Check Stock

PerTronix D130700 Flame-Thrower Plug and Play Vacuum Advance Black Cap Billet Electronic Distributor with Ignitor II Technology for Ford Small Block

  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
  • Our Billet I2 distributors ship with Ignitor II modules factory installed.Compatible with most Capacitive Discharge Systems.
  • Each billet distributor is hand polished and buffed to a high luster.
  • Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
  • Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
  • PerTronix D130700 can be used only with Engine Family - 221-302 V8.
Check Stock

MNNSOSE Pivot Bushing System 6061 Aluminum Integral Channel Handle with Replaceable Bushing, Stainless Steel Bottle Opener – Green

  • 【Bushing Pivot System】Effective bushings system, the pivot can be tightened with no binding and no gap, professional adjustment brings amazingly smooth flip, ultra smooth and quiet performance gives a satisfying flip experience.
  • 【Aluminum Channel Handle】Made of 6061 aircraft-grade aluminum, strong and light enough to have a good balance to adapt to various maneuvering styles. Both sides are designed with non-slip texture, hard anodic oxidation coloring process, resistant to wear and tear and not easy to fade.
  • 【Stainless Steel Blade】Passivated high quality stainless steel with a stonewashed finish for a safe and sharp free finish. CNC skeletonized for optimal balance and weight reduction for all maneuvering styles. Combines the function of a bottle opener, both a fun toy and a reliable tool.
  • 【Safe & Portable】Perfectly balanced, light weight and easy to carry, friendly harmless looking face, it is perfect for flip on the bus, walking to school, or any other public area.
  • 【Size Information】Full length 9.75″, handle length 5.5″, handle thickness 0.5″, weight 4.25 oz. Comes with spare part bag: Steel bushings, Torx screws, Bronze washers, Screwdriver, Glue. If you have any questions, please let us know.
Check Stock

PerTronix D130710 Flame-Thrower Plug and Play Vacuum Advance Black Male Cap Billet Electronic Distributor with Ignitor II Technology for Ford Small Block

  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
  • Our Billet I2 distributors ship with Ignitor II modules factory installed.
  • Each billet distributor is hand polished and buffed to a high luster.
  • Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
  • Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Check Stock

JessEm Model 08350 Dowelling Jig Master Kit, Black (08350-)

  • APPLICATION: Create 1/4, 3/8, and 1/2-inch dowel holes on the end or face of your work piece.
  • MULTIPLE DOWEL HOLE CONFIGURATION: Locations of dowels can be pre-set in 1/8-inch increments, perfect for creating multiple dowel hole configuration.
  • BUILT-IN ALIGNMENT SLOTS: Built-in alignment slot allows you to match up dowel holes that are spaced further apart for perfect aligned dowel holes.
  • STURDY CONSTRUCTION: Constructed of precision CNC machined aluminum, anodized for durability and laser engraved for fast set ups.
  • INCLUDED GUIDE BUSHING CARRIER: Includes 3/8-inch guide bushing carrier with 5 guide bushings, 1/2-inch guide bushing carrier with 3 guide bushings, and 1/4-inch guide bushing carrier with 7 guide bushings.
Check Stock