Reviews Aluminum Brazing Rods

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • ...lux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
  • 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof....
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

100 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

  • NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
  • HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
  • PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
  • WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
  • AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

50 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

  • NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to use..
  • HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
  • PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity..
  • WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals..
  • AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

  • Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
  • High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
  • Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock

100Pcs Flux Core Welding Wire Aluminum Welding Rods 550℃/1022℉ Aluminum Brazing Rods Solution Welding Flux-Cored Rods for Samll Projects (1/16''x13'')

  • ONLY FOR WELDING ALUMINUM - The Aluminum welding flux-cored rods are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance..
  • NO SOLDER POWDER NEEDED - The aluminum brazing rods don't need to use other flux powder while repairing aluminum..
  • HIGH QUALITY MATERIAL - The low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum..
  • APPLICATION - The flux core welding rods are used for welding and filling material for pure aluminum small projects, connection with aluminum bus and guide rod of electrolytic aluminum plant and electric power, chemistry and so on. The melting piont of solution welding flux-cored rods is 550℃(1022℉) ..
  • WARRANTY -- guangfan provide this product have 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock

Aufhauser SilverAlloy 45% Ag BAg-5 18 Flux Coated Silver Solder Brazing Rods 3 Sticks

  • Fluxed coated Cadmium-free 45% Silver brazing rods. 1/16" Core (3 Sticks).
  • For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
  • For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock