Reviews Aluminum Alloy T8 Fluorescent Lamp

Ghiuop 25-Pack T8 LED Bulbs 4 Foot Tube Light, 4ft LED Shop Garage Warehouse Light, 20W 5000K 2600LM Daylight White, Fluorescent Lights Tube Replacement, Ballast Bypass, Dual-end Powered, Clear Cover

  • 【5000k Super Bright & Energy Saving】This T8 LED bulb has 2600+ lumens and a CRI rating of 80+. Each 4ft led light tube has a low power consumption of 20w, instantly saving you 60% on your electricity bill when you replace your old 40 watt fluorescent tube with 20w LED lamp. The LED t8 light tube bulbs are widely used in shop, warehouse, garage, mall, hotel, office, convenience store, gas station, parking lots etc..
  • 【Premium Quality & Long Lifespan】: T8 LED bulbs are made of aluminum. Compared with the glass light tube, Ghiuop light tubes not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years). Reduce led light tube replacement frequency, saving money and time..
  • 【Reliable Lighting & Shatterproof 】Zero flickering light, zero delay, and zero worries with 48" LED t8 lights that provide high quality indoor and outdoor lighting. The 4ft led bulbs have been packed very well with Styrofoam cushioning and end cap to protect them. t8 led light has shatterproof property because it is equipped with an aluminum body and a frosted lens..
  • 【Easy Ballast Bypass Installation】Fluorescent replacement is simp....
Check Stock

SUNLITE 32w 48in T8 BlackLight Blue Fluorescent Linear Tube Light

  • Fluorescent 32 watt black light blue T8 straight tube features a medium bi-pin base, and 20,000 hours average life.
  • A Blacklight Blue lamp is essentially the same as a standard Blacklight but the glass is designed to filter out visible light.
  • Used by psychedelic shops for lighting fluorescent posters, displays, etc.
  • Sunlite T8 48 inch fluorescent bulb, 32W,.
  • Base: G22 Medium Bipost, Rated Life (hours): 20000.
Check Stock

SYLVANIA 15W 18 MOL T8 Preheat Fluorescent Linear Tube Lamp Premium Cool White Phosphor 4100K 70 CRI - 1 Pack 21603

  • SYLVANIA G12 Medium B-Pin T8 linear fluorescent lamps offer a cost-effective solution for general purpose fluorescent lighting applications..
  • These frosted lamps deliver good color rendering (CRI 70), lumen maintenance and long life of 7,500 hours..
  • With a color temperature of 2100K and brightness of 900 lumens, experience quality lighting only by SYLVANIA with 100+ years in lighting innovation..
  • Includes one 15W, 18" T8 linear fluorescent lamp..
Check Stock

JESLED Non Shunted LED Tombstones - (Pack of 50) T8 Lamp Holder, UL Turn Type Tombstone Lampholder for T10 T12 LED Fluorescent Tube Replacement, Medium Bi-pin G13 Socket for Programmed Start Ballasts

  • 【Electronic Parameter】: 660W max wattage and 600V the maximum voltage, this Bi-pin T8 tombstone fit for all kind of T8 T10 T12 fluorescent tubes..
  • 【UL Standard】: These T8 lamp holders are UL listed. They are made of high quality PBT material which is very durable and fireproof, and makes it the ideal for replacing old florescent lamp holders, 100% safe from fire hazzard, heat resistant..
  • 【Easy to Install】: These T8 lampholder are very easy to be used for both dual end powered and single end power fluorescent tubes, connect with 18 gauge power wires, it is very easy to install a light in this socket..
  • 【Ideal for 4FT LED Bulbs 】: This non shunted led tombstone is widely used for T8 4ft led bulbs. If you need high output 4ft led bulbs, please search "B07F73PSRY", "B074QP6PNH", "B07CWXT5R1" or "B07LFJ27JH"..
  • 【Hassle-free Warranty】 - JESLED offers 3-year unlimited warranty means we've got you covered! Contact us for an easy and fast replacements..
Check Stock

CNSUNWAY LIGHTING 8FT LED Bulbs, 45W 5400LM Super Bright, 5000K Daylight Glow, Frosted Cover, Ballast Bypass, High Output, T8 T10 T12 Single Pin LED Fluorescent Replacement Bulb(4 Pack)

  • 【Connectable】-8FT LED shop lamps can be connected with seamless connectors or T8 connector wires. (Please do not exceed 4 in series at a time) Replace the 150W fluorescent lamp..
  • 【EASY INSTALLATION】 - Easy to replace the traditional fluorescent tube lamp fixture, hard-wired, plug in with T8 power cord. Package comes with T8 metal clips brackets, screws, small connector, a on/off switch power cord and pigtail power cable. You can install these led tube lights on the wall or ceiling..
  • 【EYE PROTECTIVE】 T8 LED Tube Lights with bracket(Integrated) - Daylight white glow 5000 Kevin with clear cover and provide high output. These 8FT lights can be used Indoor shop, grocery, flea market, garage, warehouse, workbench, basement, laundry room, photo studio, gymnasium, practice room...
  • 【HIGH OUTPUT】 - This LED light fixture has 384 LED chips, high output and it will emit up to 9360 lumens bright lighting..
  • 【QUALITY ASSURANCE】 - This 8FT LED Tube Light Single Fixture have 3 years warranty, easy and fast replacement is offered if any quality issue..
Check Stock

JESLED T8 8FT LED Light Bulbs, 50W 6000LM, 5000K 4Pack, Single Pin FA8 Tombstone Holder 12-Pairs,T8 U Clips Holder Bracket for 8FT LED Light Bulbs 24-Pack

  • 【Bright and Energy Efficient】 - JESLED T8 8ft LED bulb can brighten your space with 6000+ lumens. Save 62% on your electricity bill instantly when you replace your old 130-watt fluorescent tubes with high-output 50-watt 8-foot LED tubes..
  • 【Design Science】- JESLED Shatterproof Single Needle 8ft LED Tube has an excellent lifespan of over 50,000 hours! Double row LED chips, V-shaped 270 degree angle design, 6000k, make the product brighter and better, ideal for workbench, basement, garage, office, and shop general lighting..
  • 【Easy Installation】- JESLED fa8 8ft LED bulbs are powered by double ends and require simple, energy-efficient ballast bypass (straight line) installation. Note: Please install this product away from radios, remote control doors, and other places that may cause electromagnetic interference..
  • 【Fluorescent Tube Replacement】 - JESLED Single Pin 8ft LED Replacement is perfect for fluorescent light fixtures. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
  • 【Application】-This lamp holder is suitable for changing the single-ended or double-ended power supply route, and the buckle can better fix the 8ft long lamp tube..
Check Stock

Kihung 4FT LED Light Bulbs, 24W 3120LM 6000K, 4 Foot T8 T10 T12 LED Replacement Fluorescent Bulbs, Garage Shop Light Tube, Ballast Bypass, Dual-end Powered, G13 Base, 12-Pack

  • High Brightness & Energy-Efficient - These 4FT LED Light Bulbs has 2 row of the led chips, which can produce more than 3120 lumens(003e130lm/w).
  • Upgrade Version - The main controller passed the electro-magnetic compatibility tests. Our 4FT LED light bulbs will not cause EMI.
  • Fluorescent tube replacement - T8 4ft LED light tubes are prefect for replacing T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures.
  • Easy Installation - These 4 Foot fluorecent tube light replacement are dual-end powered and require a simple, energy-saving, ballast bypass (direct wire) installation.
  • Long Life - Because of the high strength aluminum housing, Our 4ft T8 LED light tube will not shatter and have efficient heat dissipation.
Check Stock

ICN2P32N, 120-277V, 50-60Hz Input Frequency, Solid Wire Type, Instant Start Centium Electronic Fluorescent Ballast for 2 F32T8 Lamp Type, Indoor/Outdoor Use with Automatic Restart Ballast Box, 10 Pack

  • FEATURES: With its reliable and long-lasting energy efficient performance, the Ciata ICN2P32N Instant Start Centium Electronic Fluorescent Ballast is a perfect choice as an Electronic Ballast that regulates the current to the lamps and provides sufficient voltage to start the lamps. Featuring a starting method of Instant Start and Automatic Restart facility, the Ballast will be a premium addition to any Fluorescent F32T8 Lamp type fixture..
  • GENERAL INFO AND DIMENSIONS: Designed for 1/2 Piece/Unit T8 Fluorescent Lamp piece per unit, the Ciata Ballast features a T-Case Maximum Temperature (Nom) of 70°C. The Instant Start Centium Electronic Fluorescent Ball features a Sound Rating of A category. Housing dimensions of the Electronic Ballast constitute the following 9.5-inch x 1.3-inch x 1.0 inch and constitute a Lamp Rated Watts of 32 W respectively..
  • ELECTRICAL AND OPERATING DETAILS: Constituting an Input Voltage of 120 to 277 V and Input Frequency of 50 to 60 Hz, the Ciata Ballast has a Max THD of 10% and has got an Ignition Time (Nom) of 0.1s. Other specifications constitute the following – Lamp Current Crest Factor (Nom): 1.7, Ballast Factor (Nom): 0.89, Power Factor (Nom): 0.98, Input Power (Nom): 56-56W and with a Minimum Operating Input Current o....
Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 50-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
  • 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 30-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
  • 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check Stock

The Axiom

  • ✔ Ballast Removal required : Remove the ballast before you install these T8 4ft led bulbs 2pin ends！.
  • ✔ SAVE 65% INSTANTLY - Save 65% on your electricity bill. Replace 80 Watt fluorescent tubes with 28 Watt LED Tube lights (Lighting output 2640 lumens) ..
  • ✔ HIGH BRIGHTNESS - Using imported high brightness LED as light source,Brightness is three times as the same power traditional light source.
  • ✔ EASY INSTALLATION - Can be installed on the traditional G13 4FT T8 lamp socket, bypass the starter and ballast before installation.This 4ft led bulb is double-ended connection. Fast, simple and secure installation..
Check Stock

20-Pack JACKYLED Screw Type T8 Lamp Holder with Wires UL Non-shunted Tombstone Light Socket for LED Fluorescent Tube Replacements

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 608V. Great for retrofitting your fluorescent....
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 108% safe from fire hazard, durable even after years of....
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 25 AWG Wire. Just connect the wires, plug the....
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between....
  • 108% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience.....
Check Stock

12-Pack JACKYLED Non-Shunted Turn-Type T8 Lamp Holder UL Socket Tombstone with 10 inches Wires Attached for LED Fluorescent Tube Replacements

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 601V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 101% safe from fire hazard, durable even after years of use..
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects..
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T9 lights..
  • 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check Stock