Reviews Alumina Heater
MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers
- 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
- How to tell if your igniter is working, if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
- 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
- It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
- Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..
Check StockDental SHOFU Beautifil II adhesive 4.5g A3
- Z-Bond is a brush on single bottle prime for zirconia and alumina ceramics used prior to dental filling materials for direct restoration (repair) and cements for indirect restoration. While primarily for zirconia and alumina, the product also provide improved adhesion when used to prepare precious and non-precious metals. Z-Bond is contraindicated on lithium disilicates where silanes perform better..
- Adhesive intraoral repair of defects in zirconia and alumina restorations.
- Conditioning of zirconia and alumina restorations prior to cementation, e.g., crowns, inlays, onlays, etc..
Check Stock30 Pcs 1/2" x 12" Replacement Sharpening Belt Kit for Official Work Sharp Knife & Tool Sharpener (WSKTS & WSKTS-KT / Mk.1 & Mk.2) - 80/120/240/400/1000/2500 Grits
- Compatiblity With: The 1/2" x 12" Replacement Belt Kit compatible with Official Work Sharp Knife & Tool Sharpener (WSKTS & WSKTS-KT / Mk.1 & Mk.2).
- Package Included: 30 Packs 1/2" X 12" Knife Sharpener Sanding Belts: 5 pcs 80 Grits Zirconia belts, 5 pcs 120 Grits Zirconia belts, 5 pcs 240 Grits Alumina belts, 5 pcs 400 Grits Alumina belts, 5 pcs 1000 Grits Silicon Carbide belts, 5 pcs 2500 Grits US-Alumina belts.
- Premium Abrasives: The material for coarse 80/120 grit is zirconia, medium 240/400 grit is alumina, fine 1000 grit is silicon carbide, and the polishing 2500 grit is US pyramid alumina. Wear-resistant and long lasting.
- Wide Application: These Different Grinding belt Set meet all your sharpening needs. Derusting, deburring, blade edge sharpening, welding spot grinding and polishing for metal, wood, fiberglass, rubber, plastic etc.
- Stable and Strong Joints: The joint is flat and smooth, dual directional tape joint allow a smooth transition in either direction, there is no jumping during the grinding process, safe grinding..
Check StockFlap Disc grinding wheel sanding discs 25 Pack 4.0
- 25 pieces T27 aluminum wheel with high lead oxide alumina, 4.0 inch x 5 / 8 inch, 25 pieces of 60 grain size. It can be used for edge machining and profile application, providing a grinding angle of 10-15 degrees, can be used for edge machining or profiling application, and can effectively absorb vibration without generating stains, thus bringing more stable and effective..
- High-Performance Bevel T27 Wheel high-density and high-quality zirconia is produced to make it compatible for grinding, with the maximum speed of 13, 000 RPM..
- Safety made of alumina abrasives and zirconia alumina materials, it has longer service life than the standard alumina abrasives. It has a good heat dissipation, low noise, higher toughness and abrasive resistance, and it is specially designed for stronger and more economical grinding wheels..
- Application Rust protection, Paint, nonferrous metals, chamfer, mixing by welding, stainless steel and nonferrous metals, cleaning and finishing, polishing, wood and plastic, the perfect products can meet your needs..
- Thanks for buying]if you have any questions about our products, please send us email. We are 100 percent to help you with your purchase. If you have any questions, please feel free to contact us..
Check StockSandpaper 80 Grit,Wet Dry Sanding Sheets,High Performance White Fused Alumina Abrasive Sand Paper for Wood Furniture Finishing,Metal Grinding,Automotive Polishing,9 x 11 Inch,Purple,10-Pack
- 【PREMIUM MATERIAL】Made of white fused alumina abrasive,the benefits of White Fused Alumina in applications are high alumina content,which is the purest alumina(Alumina powder content 99%),low impurities,low heat generation and high grinding efficiency,it is very hard and sharp with a fast cleaning rate.Because of low iron content,Sandpaper color will not discolor the surface you are sanding..
- 【ELECTRO COATED TECHNOLOGY】ensures the grit distributed homogeneously,anti-static,wear resisting and prevent clogging,So it will not fall apart,tear or crumble off during using,Cuts faster and Lasts longer than conventional sanding sheets..
- 【DURABLE LATEX PAPER BACKING】Latex paper is durable,waterproof,good flexibility,wear-resistant.Will not easily break and damage during use,the durable backing stands up to the job on wet or dry surfaces,Suitable for wet sanding and dry sanding..
- 【MULTIPURPOSE】Great for construction,carpentry,Auto Body Repair project,automotive polishing and home improvement projects,Suitable for wood,metal,plastic,drywall,fibreglass porcelain,art and craft as well as corner cleaning and polishing..
- 【EASY TO IDENTIFY】The grits of the sandpaper are printed on the back for easy identification.Size: 9 x 11 inches, Package contents....
Check StockOTOOLWORLD 99.3% Alumina Crucible Al2O3 Assay Crucible for Lab Laboratory (100x40x20MM)
- 99.3% Alumina, and can work maximum 1600℃.
- Crucible use temperature: less than or equal to 1600 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
- As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
- please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..
Check StockOTOOLWORLD 99.3% Alumina Crucible Al2O3 Aluminum Oxide Crucible Assay Crucible for Lab Laboratory (500ml)
- 99.3% Alumina, and can work maximum 1600℃, select the size you need.
- Crucible use temperature: less than or equal to 1600 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
- As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
- please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..
- please note: the color may a little different as photo because of the firing procedure, Will not affect the use.
Check StockOTOOLWORLD 99.3% Alumina Crucible Al2O3 Aluminum Oxide Assay Crucible for Lab Laboratory 120ML 90MMx35MM (90x35MM 120ML)
- 99.3% Alumina, and can work maximum 1650℃.
- Crucible use temperature: less than or equal to 1650 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
- As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
- please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..
Check StockTIG Welding Torch WP-17V 13ft 150Amp Air Cooled Lift TIG Torch for YESWELDER MIG-205DS MIG-250PRO MIG Welder ARC-205DS Stick WELDER
- [UPDATED] A brand new Lift Tig gun with anti-aging rubber, outer woven material..
- [APPLICATIONS] For YESWELDER MIG-250PRO MIG Welder, MIG-205DS MIG Welder and ARC-205DS Stick Welder..
- 2. Accesories: 10N50 Alumina Ceramic Cup #4 (1/4" orifice)//10N49 Alumina Ceramic Cup #5 (5/16" orifice)//10N48 Alumina Ceramic Cup #6 (3/8" orifice)//10N25 Collet 1/8"(3.2mm)//10N23 Collet 1/16"(1.6mm)//10N24 Collet 3/32"(2.4mm)//10N28 Collet Body 1/8"(3.2mm)//57Y02 Long Back Cap//57Y04 Short Back Cap..
Check StockSandpaper 400 Grit Wet Dry Sanding Sheets 9 x 11 Inch Advanced White Fused Alumina Abrasive Sander Paper for Wood Furniture Finishing Metal Sanding Automotive Polishing Purple,12-Sheets
- 【PREMIUM MATERIAL】Premium Wet Or Dry Sandpaper Is Constructed with white fused alumina abrasive which is the purest alumina(Alumina powder content....
- 【WET AND DRY SANDING】Latex paper backing is waterproof,good flexibility,wear-resistant.Will not easily break and damage during use,the durable....
- 【ELECTRO COATED TECHNOLOGY】 Electro coated ensures the grit distributed uniformly, anti-static,wear resisting and prevent clogging, Has Maximum....
- 【MULTIFUNCTIONAL】Suitable for construction,carpentry,Auto Body Repair project,automotive polishing and home improvement projects,Suitable for....
- 【EASY TO IDENTIFY】The grits of the sandpaper are printed on the back for easy identification,Product Size: 9 x 11 inches, Package Including : 12....
Check StockTockrop 24 PCS 1/2″ x 10″ Knife Sharpener Sander Belt Set for Work Sharp WSCMB Combo Knife Sharpener- 4 PCS each of 80/120/240/400/1000/1200 Grits
- The 1/2″ x 10″ Replacement Belt Kit is for Work Sharp Combo Knife Sharpener (model WSCMB) and do not work with other Work Sharp products..
- 24 Pcs 1/2″ x 10″ Sanding Belts in total, including 4 pcs 80 Grits Zirconia belts, 4 pcs 120 Grits Zirconia belts, 4 pcs 240 Grits Alumina belts, 4 pcs 400 Grits Alumina belts, 4 pcs 1000 Grits silicon carbide belts and 4 pcs 1200 Grits silicon carbide belts..
- As a professional sanding belt manufacturer, after hundreds of trials, we find that for a knife sharpner, the best material for coarse grit is zirconia, for medium grit is alumina and for fine grit is silicon carbide. So we provide this Replacement Belt Kit for perfect sharpening..
- Precision engineered dual directional tape joints allow a smooth transition in either direction..
- Anti-clogging compounds extend the lifetime of the belts..
Check StockDenso (3297) SK20R11 Spark Plugs, Pack of 4
- Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
- Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
- Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check StockDenso (4507) PQ16TT Platinum TT Spark Plug, (Pack of 1)
- Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
- Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
- Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock