Reviews Alternating Current Wrench

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer

  • This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation..
  • This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for....
  • Two Form of Output: current output or voltage output (burden resistor needed to add).
  • Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
Check Stock

Digilent Pmod ISNS20: 20A Current Sensor

  • 【FUNCTION】Adjustable DC current induction switch is a switch output detection, monitoring and protection product developed by using advanced non-sourced power supply (only for alternating current) technology.
  • 【IDEAL CHOICE】Compared with the traditional transformer and thermal protector, the current induction switch has the advantages of high accuracy, stable performance and long service life, it is an ideal choice for automatic industrial control equipment and power monitoring.
  • 【APPLICATION】Widely used in substations, variable frequency speed regulation devices, frequency converter devices, electrolytic plating, electric locomotives, street lamp monitoring, coal mines and other automation industries that require current monitoring.
  • 【PRINCIPLE】The current induction switch uses the principle of electromagnetic mutual inductance of current for safety, introduction, and convenience to monitor or detect the current of electrical equipment.
  • 【TWO TYPES】The switch type is normally open and normally closed, you can choose the appropriate product according to your needs, the startup time is less than 0.1 seconds. The shell material is fireproof ABS, which is safer to use.
Check Stock

SQL 100 amp 1600V 3 phase AC to DC High Power Rectifier Silicon Full Wave Diode Bridge Rectifier Module 5 Terminal with Heatsink

  • High quality bridge rectifiers used for conversion of an alternating current input into a direct current output.
  • Well welded structure with good temperature and power cycle ability ensures a more stable performance.
  • Designed for 3 phase rectification, output DC current is 100A.
  • It has a large over-current capacity, good heat dissipation.
  • This high power bridge rectifier can be widely used for power supply.
Check Stock

TEHAUX Bridge Rectifier Diode QL25A 1000V High Current Three Phase Rectifier Bridge Fast Recovery Rectifier for Combiner Electric Welding 4Pcs

  • Applications for rectifier current, industrial automatic control, digital-controlled machine and remte controller system..
  • bridge rectifiers used for conversion of alternating current input into a direct current output..
  • Well welded structure with nice temperature and power cycle ability ensures a more stable performance..
  • This bridge rectifier can be used in a wide variety of applications..
  • Single phase, full wave, Low reverse leakage current, Low power loss, high efficiency..
Check Stock

RV Trailer NORCOLD PORTABLE REFER/FREEZER Refrigerator/ Freezer 62

  • Dual Compartment Refrigerator With Freezer.
  • 15-3/4 Inch Width x 25-1/2 Inch Depth x 16-15/16 Inch Height.
  • 0.5 Amps At 120 Volt AC/ 4.8 Amps At 12 Volt DC/ 2.4 Amps At 24 Volt DC.
  • 2-Way Alternating Current/ Direct Current.
  • With Removable Wire Basket/ DC Cord/ Cigarette Lighter Plug.
  • Use Optional AC Adapter 634650 For AC Power.
Check Stock

Compatible with Glock 43 Glock 43x, OWB Holster Fit G43 G43x, 360 Degrees Adjustable Belt Clip, Fit 1.5'' 1.75'' 2.0'' 2.25'' Wide Belt, Level II Retention Index Finger Release

  • CONVERSION: High quality bridge rectifiers used for conversion of an alternating current input into a direct current output.
  • GOOD TEMPERATURE: Well welded structure with good temperature and power cycle ability ensures a more stable performance.
  • SINGLE PHASE RECTIFICATION: Designed for single phase rectification, output DC current is 200A.
  • GOOD HEAT DISSIPATION: It has a large over-current capacity, good heat dissipation.
  • MULTIPLE USAGE: This high power bridge rectifier can be widely used for power supply.
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod Pure Green EW-P 3/32 x 7 | 10-pcs

  • 10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only..
  • 10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Park Tool BBT-22 Shimano Sealed Cartridge Bottom Bracket Tool

  • The BBT-22 is a shop quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups..
  • Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup..
  • Can be used with a 3/8” drive torque wrench, 3/8” ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1” wrench.
  • The BBT-22 is an updated version of the current BBT-2..
Check Stock

ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service

  • ELECTRIC IMPACT WRENCH: Includes fuse, 2 chrome vanadium steel (CR-V) wheel nut socket adapters 17-19mm 21-23mm, and 11.5-foot (3.5m) long power cable with a 12V auto cigarette lighter adapter.
  • 12V DC with 12A maximum current, 100W rated power, 340N.M maximum torque.
  • 2-IN-1 ELECTRIC HYDRAULIC JACK/INFLATOR: Jack – Self-locking, 12V DC input, 150W rated power, 13A max current, 15A fuse, 11.5ft (3.5m) power cable, 3-Ton (2.7MT) loading weight, 6.1-17.7in (15.5mm-45mm) lifting height, 5°F to 122°F (-15°C-50°C) working temp.
  • Inflator – Needle heads, 12V cigarette lighter fuse, six-angle spanner.
  • 12V DC input, 35L/min inflating speed, 10A max current, 150 PSI (10 BAR) max pressure, 23.6in (60cm) air hose length.
  • SIMPLE STORAGE: Extremely heavy-duty 15.5” x 7” x 15” inch (39.4cm x 17.8cm x 38.1) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • Includes traction strips on backside so the case will not slide around in the trunk.
Check Stock

Electric Hoists, 500KG/1100LB Lifting Capability, 7.6M/25FT Lifting Height, with Wireless Remote Control, Portable Household Winch 110V

  • Three control way: manual control, Remote control(need a 23A 12V battery, not included in package).
  • Using single alternating current as power source.
  • Current overload protection function to prevent optional overload.
  • High strength aviation level zincification steel wire rope for safety and abrasion resistant.
  • Hooks for both side, which is easy installation and a safe and reliable application.
Check Stock

Smartxchoices Black MIG 130 AC Flux Core Wire Automatic Feed Welder Gas Shielded Welding Machine w/Free Mask 110V MIG 130 110v

  • Max open voltage: 37V, Weld able wires: 0.023'' to 0.035'' steel and stainless steel.
  • Duty Cycle:10% at 105AMP / 35% at 60 AMP.
  • Package including： 1X welder machine, 1X welding gun, 1X Welding Wire, 1X weld mask, 1X brush 2.5M.
  • Torch With Full On / Off Safety Control, Automatic Thermal Safety Protection..
Check Stock

Reboot TIG Welder AC/DC Aluminum Welding Machine with Pulse Foot Pedal 200A Full Digital Control 110/220V High Frequency TIG ARC 2 in 1 Stick Welding Machine

  • AC/DC TIG Welding(pulse)--alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum,....
  • 2T/4T (TIG)--determines the control of the operating mode and offers extended control over the current flow. In 2T mode, the high-frequency ignition....
  • TIG Aluminum Welder--10-200AMP AC/DC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel and....
  • Equipped with a footswitch, welding is more convenient, anytime, anywhere, free welding!（30A breaker suggested for 220V, 50A breaker suggested for....
  • 3 year’s warranty provided,please contact us for any assistance.We will take each and every action to prevent you from bearing any loss at Amazon as....
Check Stock

ANDELI Aluminum Welding Machine 110V/220V 200AMP Cold Welder with AC DC Pulse Cold TIG Welding Machine TIG-250PLS

  • 【Multifunction】This is a cold welding/aluminum welding machine with a voltage of 110V/220V. The current is 200 AMP. There are 4 modes at the same....
  • 【Cold welding】It can reduce deformation and discoloration. In cold welding mode, the color of aluminum and stainless steel welds is silver-white.....
  • 【Amazing effect】Multi-mode selection, more intuitive control. ANDELI TIG-250PL can weld 0.04 inch seamless aluminum plate by cold spot welding,....
  • 【AC/DC welding】Alternating current (AC) and direct current (DC). Can weld metals, such as iron, stainless steel, aluminum, copper, etc. Equipped....
  • 【Package delivery】Argon arc welding and aluminum sleeve: TIG-250PL ACDC 110V / 220V, with American standard plug, grounding clamp 2m, aluminum....
Check Stock