Reviews Alloy Tube Bending

VEVOR Copper Pipe Bender, 7 Colorful Dies 1/4-7/8 inch 90 Degrees Forward and Reverse Bending, 6-22 mm for Copper & Aluminum Tubes with Reverse Bend Attachment

  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 1/4 to 7/8 inch (6-22 mm) tubes both forward and reverse to 90 degrees. It allows tight 90-degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending..
  • 1/4"-7/8" Bending Range: We provide 7 colorful interchangeable tube bender dies, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good processing performance is widely used and sturdy for long service life..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, and hyd....
Check Stock

Yaheeda Tube Bender Kit,90 Degree with Reverse Bender for Copper Aluminum Soft Steel Brass 1/4” to 7/8”, HVAC Refrigeration Industry Maintenance,Containing Tube Cutter & Deburrer

  • Our manual tube bender has a compact structure, which allows it to function normally even in limited spaces. The body is made of alloy aluminum, durable and light weight, can finish the bending tasks easily. Beside the tube bender, tube cutter and durring tool are also in the package, get multiple tools in one purchase..
  • This tube bender is not hard to assemble, there is an illustrated guidance of assembly and how-to-use in the package. No more screws or nuts means no worry about losing accessories. Assembly is easy, and using is even more easier, labor-saving and time-saving, can improve the working efficency vastly..
  • The maximum bend angle of this tube bender is 90°obversely and reversely. In the situation like facing wall or corner that obverse bending is not convenient, you can use the reverse bending mode to finish task without problem..
  • The tube bender is widely applicable for pipes at different O.D.s:1/4",5/16",3/8",1/2",5/8",3/4",7/8"(6mm,8mm,10mm,12mm,16mm,19mm,22mm).There are replacable bender heads in the package with percise size all made of alloy aluminium, durable and easy to use..
  • Our tube bender is compatible with copper,aluminium,thin steel pipes,widely useful in sanitation,HVAC,radiant floor heating,refrigeration AC system and hydruali....
Check Stock

4LifetimeLines 25' 3/16 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, Inverted Flare

  • Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed.
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing. Copper Nickel lines are ideal for vehicles experiencing harsh weather and environmental conditions.
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market.
  • We take pride in producing the best fuel, transmission and brake lines in the industry. Our Limited Lifetime warranty protects all of our products against defects for its entirety as long as it is installed correctly.
  • Complete Brake Line Replacement Tubing Kit Assortment - Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut.
Check Stock

Antstone 1/4” 3/8” 1/2” O.D. Tubing Bender 3 in 1 Tube Bender 180° HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for soft copper / aluminum tubes.
  • applicable tube outer diameter: 1/4"、3/8"、1/2".
  • applicable wall thickness: 0.027”-0.059”(0.7mm-1.5mm).
  • bending radius: 0.82”, 1.14”, 1.43”(21mm, 29mm, 36.5mm).
  • [3-in-1 Design] - The tube bender is a 3 in 1 tool and will fit 1/4", 3/8", 1/2" outside diameter tubes..
  • [High Quality] - High-quality alloy aluminum body, which is lightweight and durable. (NOTE: if the tube wall thickness < 0.059”, it may be damaged.).
  • [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The soft rubber handle provides a comfortable grip..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

  • Universal Usage: The multifunctional tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
  • Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or ot....
Check Stock

7 Size Pipe Threader Threading 3/8 to 2 Die Dies Set w/ Handle Ratchet

  • 7 exchangeable tube bender aluminum former: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".
  • The package include with a pipe cutter that with spare blade.
  • The tubing bender is a professional tool for commercial or occasional use to change bending mandrels quickly..
Check Stock

4LIFETIMELINES 25 ft 1/4 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, 16 Fittings Included, Inverted Flare, SAE Thread, 0.028 inch wall thickness

  • True copper nickel alloy non magnetic tubing - super easy bending and flaring, no tools necessary.
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing.
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market.
  • Lifetime warranty, we promise as long as the lines are installed correctly out lines will outlast the life of the vehicle.
  • Complete 1/4" Replacement Kit Includes 16 Fittings: 2 x 1/4” (7/16-24) Inverted Tube Nut, 10 x 1/4” (7/16-24) Inverted Tube Nut (Long), 2 x 1/4” (9/16-18) Inverted Tube Nut, 2 x 1/4” (1/2-20) Inverted Tube Nut.
Check Stock

WISPAUSU HVAC 90 Degree Pipe Bender Set ST-R999 Ratcheting Pipe Tubing Bender Hand Tool with 1/4 to 7/8 Inch Pipe Bender Heads

  • WHY NEED IT -- The professional pipe bender kit can help you to bend the metal pipe easily, and the bending angle can reach 90 degrees. This pipe bender is powerful and has reverse pipe bending function. It is made of high-quality carbon steel and aluminum alloy, which is strong and durable. It is very helpful for your pipe bending work..
  • 7 PIPE BENDER HEADS -- Equipped with 7 sizes of pipe bender heads, suitable for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8", pipe benders The head can be replaced to meet more needs..
  • HIGH QUALITY -- The ergonomic thick handle design is comfortable and safe to use. It will not be injured or risky during work. It is very suitable for one-handed operation and will not be tired after long hours of work..
  • EASY TO USE -- Place the metal tube between the cross bar and the mandrel. Pull the ratchet handle and the pump rod until the required angle is reached, up to 90 degrees. Then press the release trigger above the lever to retract the mandrel and release the metal tube easily without causing damage to the tube..
  • WHAT YOU GET -- The tool kit includes 1PCS Pipe Bender, 7PCS Pipe Bender Heads, 2PCS Fixed Supports, 1PCS Deburring Tool and User Manual. All tools are stored in a plastic case, neatly placed to protect the tools an....
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

DUXX - Camping Folding Table, Outdoor Portable Multi-Function Picnic Table, Suitable for Garden Market Leisure Folding Table (Color : Beige)

  • ▲Material - Aluminum alloy structure, strong bearing capacity. The desktop environmental protection board is designed to be moisture-proof, waterproof, fireproof and easy to clean..
  • ▲Scope - Suitable for outdoor activities such as camping, tourism, hiking, etc. or as a practical leisure furniture at home..
  • ▲The thick aluminum alloy alloy is edged to prevent deformation and damage, and has strong impact resistance..
  • ▲Thick aluminum alloy square tube, bending and pressure resistance, strong bearing capacity..
  • ▲Size - 150 × 60 × 87cm / 59 × 23.6 × 34.3inch.
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

IBOSAD Reverse HVAC Refrigeration Ratchet Manual Compact Copper Tube Bender & Pipe cutter Copper Pipe Tubing Set with Bending 3/4 7/8 3/4 1/2 5/8 1/4 5/16

  • 7 exchangeable tube bender aluminum former: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".
  • The package include with a pipe cutter that with spare blade.
  • The tubing bender is a professional tool for commercial or occasional use to change bending mandrels quickly..
Check Stock