Reviews Alloy Steel Machining Stamping

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

Weltool Flashlight Strike Bezel - 304 Stainless Steel for Maglite C or D cell flashlights LED ML300L & ML300 LX - Upgrade Maglite Glass Breaker

  • Upgrade Stainless Steel Strike Bezel fits Maglite C or D cell flashlights, such as Maglite 2-6 C/D cells led, incandescent, ML300 series. Accurate machining, perfectly fit. ATTENTION: Not Fit ML150, ML125,ML100, ML50, ML25 and Mag Charger series!.
  • Made from an entire steel column with CNC accurate machining, 1.13 times of hardness then 7075 aluminum alloy. It’s much more durable and tougher than aluminum alloy with more impact resistance & corrosion resistance..
  • 6 attack teeth design, fits for self-defense or use to shatter the glass in an emergency..
  • Sandblasting surface, more wear proof than aluminum alloy’s anodizing and it’s adaptive for flashlight bodies with different colors..
  • Package includes: 1 * LB03 Stainless Steel Strike Bezel 1 * Replacement Lens 1 * O-ring 1 * Protection Case for Lens.
Check Stock

Yoption 27 Pieces Leather Stamping Tool Set, 26 Letters Alphabet Stamps Steel Punch Tool 9mm+1 Stamping Handle for Leather Craft (9mm)

  • Quality Material: The letter leather stamps are made of alloy steel. Size: The height of Alphabet is 9mm..
  • 27Pcs/Set leathercarft stamping tool, including 26 Pcs A-Z alphabet letters + 1 stamping handle. It's easy and fun to stamp designs in leather with these tools..
  • Suitable for handmade Leather jacket, bags, shoes, belt, wallet, watch wristband and other crafts embellishments. Best used for vegetable tanned leather with a thickness of more than 1.5mm. AN AWESOME TOOL for leather craft professionals and amateurs..
  • These stamps are made of extremely strong, heavy-duty alloy steel for powerful impact and long service life, giving you stronger imprints that display more accurately. You can make clear and accurate stamping results with less time and effort..
  • Use Suggestions: Wet the leather with a wet sponge before works,Then use the hammer to hit the end of the handle and control the power, avoid ghosting or surface damage..
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

Yoption 27 Pieces Leathercarft Stamping Tool Set 26 Letters Alphabet Stamps Steel Punch Tool 6mm+1 Stamping Handle for Leather Craft

  • High Material: The leathercarft stamp is made of alloy steel. Size: The height of Alphabet is 6mm..
  • 27Pcs/Set leathercarft stamping tool, including 26 Pcs A-Z alphabet letters + 1 stamping handle. It's easy and fun to stamp designs in leather with....
  • Suitable for handmade Leather jacket, bags, shoes, belt, wallet, watch wristband and other crafts embellishments. Best used for vegetable tanned....
  • These stamps are made of extremely strong, heavy-duty alloy steel for powerful impact and long service life, giving you stronger imprints that display....
  • Usage: Wet the leather with a wet sponge before works,Then use the hammer to hit the end of the handle and control the power, avoid ghosting or....
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

  • * Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
  • * High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
  • * It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
  • * The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
  • * The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Metal Stamping Kit, 64 Piece Punch Set - Handwritten Style Font Number & Letter Stamps for Metal, Jewelry, Wood, Leather & More

  • PROFESSIONAL QUALITY - This Crutello Metal Stamps Set Includes 26 Uppercase & 26 Lowercase Basic Sans Serif Font Letter Punches, 8 Number Punches (6 and 9 are the same punch). The perfect jewelry stamping kit for the artist in your family!.
  • DESIGNED TO LAST - This Jewelry Letter Stamping Kit features 3mm Steel Punches Designed to Last up to 10,000 Punches. All Metal Letter Stamps are made of High Quality Hrc 58-62 Alloy Steel. Punches are on a 1/8" (3mm) square shanks..
  • FOR USE ON HARD OR SOFT SURFACES - This metal stamping letter set is perfect for beginners creating custom one of a kind jewelry, such as stamped necklaces and bracelets. Perfect metal or leather stamp set for use on hard or soft materials, including Metal, Wood, Plastic, Leather, Aluminum, and So Much More!.
  • CONVENIENT AND DURABLE STORAGE CASE - The Plastic Storage Case Keeps Your Metal Letter Stamping Kit Clean and Organized, so You Won’t Lose Any Letter Stamps Metal Pieces kep safely inside..
  • BASIC SANS SERIF FONT - Add a Personalized Touch to Your Creations! These Metal Stamps Feature a Clear and Clea....
Check Stock

70 Pieces Leather Craft Stamping Tools Include 68 Pieces Alphabet, Number and Pattern Leather Craft Stamps, 2 Pieces Leather Punch Tools

  • What you will get: you will receive 2 pieces Leather Craft Stamping Tools, as well as 68 pieces different styles leather craft stamps in 3 styles, namely letters, numbers and patterns, enough quantity for you to use.
  • Suitable for: they are suitable for the decoration of handmade leather material jackets, suitcases, shoes, belts, purses, watches and wristbands. Create personalized and eye-catching purses and other leather products using leather tool kits. Please pay attention that the set is not suitable for using on metal and wood.
  • Nice features: you can apply it to DIY handmade leather products to make the work more personalized and refined. The stamp has been treated with precision, and these tools are easy to use and store. The design of stamping on leather is both simple and you can will get clear and accurate stamping results with less time and effort.
  • Sturdy material: letter and number, pattern stamps are made of alloy steel for long service life, providing you with a stronger imprint that can be displayed more accurately.
  • Suitable size: the stamping steel punch tool is 9.5 cm/ 3.7 inch, and letter and number stamp is 6.5 mm/ 0.26 inch, and the pattern stamp is 1 cm/ 0.4 inch, normal size can work with your different need.
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

MULSAME 37 Pcs Metal Stamping Kit with 1/8 Number & Capital Letter Metal Stamps Square Shank Fit for Jewelry Stamping.

  • MULSAME professional metal stamp kit includes uppercase 26pcs. Letter(A-Z), 9pcs. number(0-9) reverse “6” can be used as “9”,1pc. symbols(&)....
  • All metal stamps are made of high quality alloy steel to guarantee the strength and hardness. And Anti-rust oil would protect the metal letter stamps....
  • MULSAME stamping kit could be used on various materials. They are not only designed as jewelry stamping kit but also designed for Metal, Brass, Wood,....
  • With MULSAME metal stamping kit, accurate dimensions and clear strokes could be designed on rings, wristband, belt etc...
  • MULSAME letter punch set is organized in a plastic case for easy storage..
Check Stock