Reviews Alloy Steel Machining Shaft

BZBMGMO 36mm Rear Wheel Axle Torque Wrench Hand Tools,CNC Precision Machining,Tolerance ±0.1

  • For adjusting belt tension or rear wheel alignment, the axle nut can be loosened without removing any exhaust components by adjusting the belt tension.
  • Includes a 1/2" square drive allowing use with a 1/2" torque wrench for proper shaft torque.
  • The tool is made of alloy steel, electroplated with black zinc, and has excellent durability. With excellent anti-rust properties, it can guarantee long-term trouble-free use.
  • The tool is made by CNC machining to ensure the best precision,Tolerance ±0.1,perfectly solve the excessive clearance between the nut and the wrench, which will make the shaft nut round.
Check Stock

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

  • High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
  • Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
  • Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
  • Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
  • Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock

Furitek (HELIDIRECT Hiroyama Titanium 1/24 Scale Micro RC Crawler Truck Kit with Mini Rocketman - Remote Control Car, Truck Kit (Only Kit)

  • Suitable for: Aluminum alloy empty frame with wheel hubs is fit for Axial SCX24 90081 Deadbolt 1/24 RC car to refit..
  • Material: Using CNC machining, Machined from aluminum and anodized for good looks Lightweight upgrade enhances car's performance in handling and durability..
  • Advantage: The steel drive shaft has high hardness and polishing performance. High‑quality frame, easy to assemble and operate, Stand out in the race beautiful shape, durable Extend the life of the car..
  • Package Included: High quality aluminum alloy 1/24 RC Car SCX24 90081 fhrame chassis (Including all the accessories on the picture)..
  • With 4 shock absorption posts, it can effectively reduce the bumps in driving, reflect its stability and reduce the impact of the axle..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

Weltool Flashlight Strike Bezel - 304 Stainless Steel for Maglite C or D cell flashlights LED ML300L & ML300 LX - Upgrade Maglite Glass Breaker

  • Upgrade Stainless Steel Strike Bezel fits Maglite C or D cell flashlights, such as Maglite 2-6 C/D cells led, incandescent, ML300 series. Accurate machining, perfectly fit. ATTENTION: Not Fit ML150, ML125,ML100, ML50, ML25 and Mag Charger series!.
  • Made from an entire steel column with CNC accurate machining, 1.13 times of hardness then 7075 aluminum alloy. It’s much more durable and tougher than aluminum alloy with more impact resistance & corrosion resistance..
  • 6 attack teeth design, fits for self-defense or use to shatter the glass in an emergency..
  • Sandblasting surface, more wear proof than aluminum alloy’s anodizing and it’s adaptive for flashlight bodies with different colors..
  • Package includes: 1 * LB03 Stainless Steel Strike Bezel 1 * Replacement Lens 1 * O-ring 1 * Protection Case for Lens.
Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

  • 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
  • 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
  • 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

Eastern Performance A-23985-54 Engine Woodruff Keys - Pinion Shaft Gears

  • 【Material】- The key woodruff is made of high quality stainless steel.Excellent wear and corrosion resistance, high shake-resistance and low coefficient of friction..
  • 【Precision Machining】- All woodruff keys are all made by high precision process center. Designed for pulleys and drive shaft applications, and they are suitable for hub adjustment..
  • 【Function】- Woodruff keys are ideal for securing wheels or pulleys to a spindle. Eliminate the need to mill holes near shaft shoulders..
  • 【Simple To Install】- Easy to operate and convenient for you to install.Easy to carry, simple operation, strong function, high accuracy, good repeatability..
  • 【Feature】- Woodruff keys are semicircular keys that are commonly used for mechanical applications. It fits in a half-moon shape slot, in a shaft, leaving the flat side of the tab exposed..
Check Stock

50 Piece Precision Screwdriver Set in Steel Rack

  • DURABLE SHAFT - The S2 steel shaft is of great shock resistance. Overall heat treatment adds extra strength and durability to it. Its nickel and chrome plating brings rust and corrosion resistance..
  • GO-THRU STRIKING CAP - A steel core goes through the whole screwdriver, transferring the force from the striking cap to the tip while striking, which protects the tool and facilitates your work..
  • ERGONOMIC NON-SLIP TPR HANDLE - Made with quality thermoplastic rubber (TPR), the handle provides a secure and comfortable grip..
  • MAGNETIC TIP - A magnetic tip makes it more convenient for your work. It easily attracts and lifts the screws from confined areas, saving your time and improving your efficiency at work..
  • PRECISE FIT - Adopting precision machining, the Phillips-head blade provides an exact fit in fasteners. The Phillips screwdriver #1x100mm from Jetech is designed for screws with the size of #1..
Check Stock

RC Drift Car 1/24 2.4GHz 4WD Remote Control Sport Racing On-Road Vehicle with LED Light, Batteries and Drift Tires (Blue 460)

  • ZD Racing launched a 1/16 full-proportional controller four-wheel drive track flat sports car.
  • The full-scale re-engraved car shell is equipped with LED ambient lights.
  • A large number of metal structural parts are used, and the hollow and high-gloss design can effectively reduce the weight of the body, enhance the strength of the body, and have a full metal texture.
  • Aluminum alloy CNC precision machining bottom plate, hollow design.
  • effectively reduce the weight of the body and enhance the strength of the body.
  • The whole car adopts refined steel drive shaft, precision high-speed bearings, and high-strength gear power transmission system, which is not afraid of speed. Easily achieve indoor/track drift racing, bringing a super visual feast.
Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

  • ...et can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
  • Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
  • woodturningTools and Accessories - 1pcs handle and 1pcs extension bar ,3PCS tool bars with carbide cutters(Round,Square,Diamond),1PCS swan neck carbide cutter hollowing tools, 1pcs T15 wrenc....
Check Stock