Reviews Alloy Steel Castings

Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Iron, Steel

  • ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
  • ⭐【Dimension】Cutting Dia: 38mm/ 1.5".
  • ⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material..
  • ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit.
  • ⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling..
Check Stock

AUTOTOOLHOME 2 inch (50mm) Metal Steel Hole Saw Tooth Carbide Tip TCT Drill Bits Kit for Thick Metal Wood

  • TCT drill bit is suitable for hand held electric drill, beach drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • The gears is made from YG8 tungsten carbide steel and the rigidity varies from 64HRC to 65HRC..
  • Sharp gears and anti-cutting with lower consumption make the product a long service life..
  • The hole saw has a center twist drill bit inside, Can drill about 3/4 inch depth for the wood, and can drill about 3/16 inch thickness for the steel.
  • Carbide teeth for fast cutting of clean, round holes.Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,etc..
Check Stock

ZCEN Mini Pipe Tubing Cutter for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass

  • The main body of the pipe cutter is made of lightweight and durable aluminum castings, and the blades are made of CNC machining with most durable alloy steel..
  • Rotate the knob to clamp the tube, Revolve the tube cutter around the pipe, and tighten the clamp steadily after each turn until it is completely cut..
  • Designed for tight spaces, the height of 2 inches allows you to use it in cramped spaces on small diameter pipes..
  • Used for cutting copper, brass, aluminum, thin steel, and PVC pipes with an outer diameter of 1/8 to 1-1/8 inches (3-28 mm). It's even used as a brake wire cutter or exhaust pipe cutter..
  • If you have any quality issues with your Tube Cutter, please feel free to contact customer service for troubleshooting help, replacement, or refund..
Check Stock

LDEXIN 38mm/1.5 Inch Carbide Tipped Hole Saw Carbide Hole Cutter Drill Bit for Cutting Metal Plate, Iron, Hard Wood

  • 【Package Content】 1Pcs Stainless Steel Hole Saw in a pack.
  • 【High Quality】 Carbide Tipped Hole Saw Tooth Drill Bits, made of Carbide Metal, give fast and easy cutting. Sharp gears and anti-cutting with lower consumption make the product a long service life.
  • 【Perfect Design】 It has an ejection spring for easy plug ejection, along with a raised shoulder helps prevent break through. The hole saw has a twist drill bit inside, which is undetachable.Specially used on metal and steel plate, give fast and easy cutting.
  • 【Wide Application】 Carbide teeth for fast cutting of clean, round holes,you can easily to drill on the thin stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling.
  • 【Service Guarantee】 LDEXIN guarantee high quality and good service. If you are not satisfied, we offer a 100% money back guarantee. No questions asked. Because we want you to be happy!.
Check Stock

Norton Gemini 57A24-R Type 18 Abrasive Grinding Cone, Aluminum Oxide, 24190 rpm, 1-1/2 Diameter x 3\ Thickness, 5/8\-11 Arbor, 24 Grit (Pack of 1)

  • 57A aluminum oxide abrasive for strong performance to price relationship.
  • Removing flaws, cracks, gates, risers and parting lines, smoothing weld seams, cleaning castings, and rough beveling.
  • For consistent, quality performance in foundries, welding shops, fabrication facilities, steel mills and shipyards, norton cones and plugs maximize your productivity.
  • for hard-to-reach areas inside castings, removing flaws and cracks, removing metal in corners.
Check Stock

TCT Hole Saw Set 3pcs JESTUOUS 3/8 Inch Shank Diameter 7/8 1-1/8 1-3/8 Cutting Dia Carbide Tipped Tooth Round Drill Bit Hole Kit Cutter for Stainless Steel Metal Wood

  • Carbide tipped hole saws are suitable for electric drills and platform drills..
  • High quality tungsten carbide materail teeth,reduce the damage of tips,increase the endurance,provide a longer service life..
  • Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,FRP,etc..
  • Designed with precision ground,sharp tough gears and stepped pilot drill bit to drilling more precise,smooth,faster and safer,leave perfect cutting results..
  • Package: 3 hole saws(cutting diameter:22mm/29mm/35mm)+extra 2 pilot drill bits+extra 1 ejector spring with plastic case..
Check Stock

Direct Store Parts Kit DG207 Replacement for Vermont Castings Rebuild Kit Burner Heat Plates Cooking Grill Grids

  • Special Notes for this item: If you are looking for parts, the BRAND and MODEL No.# (if provided, this item might be compatible with) listed below are....
  • Replacement for Vermont Castings Models: CF9050,CF9055 3A,CF9055 3B,CF9056, CF9080,CF9085,CF9085 3A,CF9085 3B,CF9086, Experience, Extreme, Extreme....
  • Replacement for Vermont Castings Models: VCS4006,VCS4106,VCS500, VCS5000,VCS5000BI,VCS5005,VCS5005BI,VCS5006,VCS5006BI,VCS5010,....
  • Grill Grid Dimensions: 16 7/16" x 9 1/16".
  • Cooking Grate Material: Porcelain Coated Cast Iron.
  • Direct store Parts Kit includes 4 Stainless Steel....
Check Stock

Norton Gemini 57A24-R Type 18 Square Tip Abrasive Grinding Plug, Aluminum Oxide, 24190 rpm, 1-1/2 Diameter x 2-1/2\ Thickness, 5/8\-11 Arbor, 24 Grit (Pack of 1)

  • 57A aluminum oxide abrasive for strong performance to price relationship.
  • Removing flaws, cracks, gates, risers and parting lines, smoothing weld seams, cleaning castings, and rough beveling.
  • For consistent, quality performance in foundries, welding shops, fabrication facilities, steel mills and shipyards, norton cones and plugs maximize your productivity.
  • for hard-to-reach areas inside castings, removing flaws and cracks, removing metal in corners.
Check Stock

Dixon 1/8\ x 1/8\ Brass Female Elbow Compression Fitting (170C-0202)

  • Approved to ansi/nsf 61-4 California ab 1953.
  • Meets federal state drinking water act, lead free requirement.
  • Brass castings conform to astm B584, uns alloy C8933.
  • Brass fittings dimensions conform to asme B16.15.
Check Stock

Eden’s Best Worm Castings Organic Fertilizer | 100% Organic Fertilizer | Organic Fertilizer for Vegetable Garden | Garden Fertilizer | 30 Pound Bag

  • - WORM CASTINGS ORGANIC FERTILIZER – Eden’s Best worm castings are as close to 100% castings as you can get. Check out our reviews to see why our products are chosen over others..
  • - 100% ORGANIC – Certified and guaranteed! Our organic fertilizer for vegetable gardens, flower gardens, potted plants, and general soil builder is 100% organic and we’re proud of it!.
  • - GROW NATURALLY – No more worrying about the harmful side effects of chemical pesticides and fertilizers. Eden’s Best earthworm castings allow you to grow flourishing plants naturally, the way nature intended..
  • - NUTRIENT RICH – Worm castings provide your plants with the nutrients and protection they need to not only grow but thrive. Our organic fertilizer has a guaranteed analysis and 1% Nitrogen..
  • - ODOR FREE – Does it smell like other natural fertilizers? Absolutely not! Our worm castings organic fertilizer does not have strong odors like other natural fertilizer products so you can use them for potting indoor plants as well as to fertilize the lawn and garden without worry..
Check Stock

tonchean 23PCS Carbide Hole Saw Kit 5/8 to 4 Inch Metal Hole Saw Cutting Set Hole Cutter TCT Metal Drill Bit Opener Cutter Tool for Hard Metal Stainless Steel Iron Wood Plastic

  • 【MATERIAL】Metal hole saw set is made of high quality tungsten carbide steel. Sharp knife edge with undetachable twist drill bit. High hardness makes it durable..
  • 【FEATURES】 Hole Saw Bits cut precise holes in stainless steel plate, mild steel, alloy steel, iron, copper, aluminum, castings, plastic and brass. And the hole saw cutting kits are available for lots of different sizes to meet most of your needs..
  • 【APPLICATION】The hole saw kit is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed, or punch the center hole in advance, which can better extend the service life of the product..
  • 【DIAMETER】Metal hole saw incluedes total 23 diamters from 16 to 100 mm.Including 16 mm/0.63'', 18 mm/0.71'', 20 mm/0.79'', 22 mm/0.87'', 25 mm/0.98'', 26 mm/1.02'', 28 mm/1.1'', 30 mm/1.18'', 32 mm/1.26'', 35 mm/1.38'', 38 mm/1.5'', 40 mm/1.57'', 45 mm/1.77'', 48 mm/1.89'', 50 mm/1.97'', 53 mm/2.09'', 55 mm/2.17'', 60 mm/2.36'', 65 mm/2.56'', 70 mm/2.76'', 75 mm/2.95'', 80 mm/3.15'', 100 mm/4''..
Check Stock

uyoyous TCT Hole Saw Set 23 PCS Carbide Hole Cutter Set 16-100mm Drill Tips TCT Bit Metal Alloy Hole Saw Kits for Wood Stainless Steel Copper Iron with Separate Small Box

  • 1.【CUTTING DIAMETER】:16-100mm，16mm/0.63'', 18mm/0.71'', 20mm/0.79'', 22mm/0.87'', 25mm/0.98'', 26mm/1.02'', 28mm/1.1'', 30mm/1.18'', 32mm/1.26'', 35mm/1.38'', 38mm/1.5'', 40mm/1.57'', 45mm/1.77'', 48mm/1.89'', 50mm/1.97'', 53mm/2.09'', 55mm/2.17'', 60mm/2.36'', 65mm/2.56'', 70mm/2.76'', 75mm/2.95'', 80mm/3.15'', 100mm/3.94''..
  • 2.【MATERIAL】:The gears is made from carbide steel and the rigidity varies from the hole saw has a twist drill bit inside, which is undetachable..
  • 3.【FEATURES】:TCT Drill Bit sets cut quick, precise holes in stainless steel plate, mild steel, alloy steel,iron,copper,aluminum,castings,plastic and brass. And the hole saw cutting kits are available for lots of different sizes to meet most of your needs..
  • 4.【TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed, or punch the center hole in advance, which can better extend the service life of the product. for PVC and wood materials, the maximum cutting depth is 0.98 inches, and the cutting depth for thin steel plates is 0.04 inches..
  • 5.【APPLICATION】: The hole saw kit is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
Check Stock

YOST Vises 750-DI Multi-Jaw Rotating Combination Bench & Pipe Vise with Swivel Base

  • Extreme-Duty Casting Clamp force: 13,400 lbs. and Torque rating: 316 Ft-Lb.
  • Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises.
  • Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125”D x 3.5"D (0.32CM x 8.9CM).
  • Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.No-pinch main screw handle.
  • Machined Q235 steel main screw 0. 75"D with rolled single acme threads at 4 threads per inch.
  • Replaceable Hardened Steel Serrated (Top) Jaws and EXCLUSIVE SELF-ALIGNING Pipe Jaws.
  • 0.51"D x 9. 5" (1.3CM x 24.1CM) Long handle with rubber bumpers.
  • Base mounting tabs: (4) x 9/16"D (14MM), mounting hardware not included..
Check Stock