Reviews Alloy Inserts

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

  • Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
  • Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
  • Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
  • Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
  • When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
Check Stock

Athiry 5PCS Door Handle Inserts Aluminum Side Grab Handle Inserts Cover Door Handle Decoration for Jeep Wrangler JK Unlimited 4 Door 2007-2017, Black Door Handle Inserts Front Rear

  • [Good Quality]*: JK Door Handle Inserts made of high-quality aluminum alloy material, very strong, high temperature, scratch-resistant performance..
  • [High Performance]*:Original car radian mold, accurate to each arc, good fitment. According to the original car radian, made of aluminum alloy material, meticulously surface, the products are rich in color, delicate in metallic texture and non-scratch..
  • [Black Door Handles]*:The push button cover trim, made with self-adhesive 3M tape, easy to install and no need to destroy the appearance of the car.
  • [Simple Installation]*:Door handle inserts for Jeep are easy to install without instructions, just use an electric drill to drill pilot holes in the handle.
  • [Fitment]*: JK Aluminum Door Handle Inserts fits for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Jeep Wrangler JK & Unlimited 4 Door..
Check Stock

CAL389-100 14mm Replacement Spark Plug Insert for 4.6 5.4 L and 6.8 V-10 Ford Triton 38900 Motor Two Valve Engines 1996-2003

  • Material: Made of High quality steel alloy, will repair other inserts that fail and has no ill effects from heat transfer..
  • Fits: For 4.6 5.4 L and 6.8 V-10 Ford Triton two valve engine spark plug threads 96-03..
  • Advantage: High quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer..
  • Dimensions: Inside Diameter: m14 x 1. 25.
  • Package Includes: 1 x Spark Plug Port Insert.
Check Stock

Berkley Big Game Casting 6 6

  • 3M powerful 500 resin System allows a thin, ultra-light blank construction with superior impact and fracture resistance.
  • Tetra axial carbon construction provides an increase in strength and durability.
  • Abu Garcia Custom Fuji soft touch reel seats for superior comfort. Stainless Steel Guide Frames with Titanium Oxide Inserts.
  • Premium grade cork handles for added comfort. Full EVA Handles.
  • Titanium alloy guides with Ultra light Zirconium inserts allow for a lightweight balanced rod.
Check Stock

2pcs Replacement Inserts Tool Compatible for 14mm Insert CAL389-100 use on 4. 6L 5. 4L 6. 8 V-10 for Ford Triton Two Valve Engines

  • Compatible for 4. 6L, 5. 4L and 6. 8 V-10 Ford Triton Two Valve Engines.
  • Material: High quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer..
  • For use on years 1996 to 2003., Part No. 389-100 Replacement Inserts.
  • Package Included: 2pcs Replacement Inserts Tool.
Check Stock

ASZLBYM 10pcs APMT1604 Carbide Milling Insert Used for Indexable End Mill, for Roughing,Semifinishing,Finishing of Steel, Cast Iron, Stainless Steel and Aluminum(APMT1604-DP)

  • Model : 10pcs APMT1604 Carbide Inserts ..
  • Machinable materials : Suitable for processing steel parts and stainless steel..
  • Advantages : High efficiency, high wear resistance, than the traditional welding blade, alloy blade processing efficiency increased more than 4 times. Adopted of high quality carbide tips, exquisite workmanship, has high strength, high toughness, stable and durable in use..
  • Packaging : High-quality double-layer foam protection, plastic box packaging, safe and easy to store.This set includes 10 pcs carbide inserts, so it provides convenience to replace the broken one, bring the experience of ease of use..
Check Stock

Accusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412

  • Small hole capacity: minimum of .430''. TCMT inserts.
  • Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
  • Bar is made of heat treated, precision ground alloy steel.
  • 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
  • 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.
Check Stock

Turning Insert Holder SVVCN 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 100mm Length.

  • ★Packing : 1pcs MTJNR5/8" , 1pcs MWLNR5/8" ,1pcs MCLNR5/8" ,1pcs SER5/8" turning holder , 4pcs carbide turning inserts and 3pcs wrenches..
  • ★ASZLBYM lathe tool holder set : Shank size: 5/8" inch x 5/8" inch.
  • Overall Length: 4"inch, cutting direction:right cutting..
  • ★Turning holders : turning holder are made of high quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning holder , for long time use..
  • ★Turning inserts : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ★The holders are packed in a premuim aluminium carrying case,easy to carry..
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • 【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
  • 【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....
Check Stock

Surborder Shop Spark Plug Insert CAL389-100 14mm Insert for 4 6L 5 4L and 6 8 V-10 Triton Two Valve Engines

  • High quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer..
  • Use on 4. 6L, 5. 4L and 6. 8 V-10 Triton Two Valve Engines.
Check Stock

GBJ 10pcs APMT1604 PDER ZM Milling Inserts Turning Inserts Cutting Tools ZM1135 for BAP400R Milling Inserts Tool Holders Processing Hard Steel Parts (APMT1604PDER Purple)

  • ☞ Model: APMT1604 PDER , Coating: CVD, Material: Carbide, Heat treatment makes inserts harder..
  • ☞Application: Especially suitable for processing hard steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC15 °- HRC45 °，installed on 400R Series End milling holder.
  • ☞Coating: CVD , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞Advantages : The carbide matrix combination with the AlTiN coating of composite multilayer structure greatly prolongs service life of cutting tool , has super strong film-base bonding force and extremely low friction coefficient ..
  • ☞Package includes: 10pcs APMT1604PDER ZM1135 carbide inserts for hard steel parts..
Check Stock

BRITPART Set of 5 Wheel NUT with Washer Compatible with Land Rover Discovery 2 Part # ANR3679

  • COMPATIBLE WITH LAND ROVER DISCOVERY 2 / RANGE ROVER P38 SET OF 5 WHEEL NUT WITH WASHER.
  • Alloy wheel nut with part number ANR3679 fits all alloy wheels on the Land Rover Discovery 2 and Range Rover P38 Land Rover # ANR3679 - Wheel Nut With Washer.
  • Conical blind wheel nut - thread 14 x 1,50 - length wheel nut (mm): 53 - length thread (mm): 49 - for steel rims or alloy rims if fitted with metallic adaptor inserts - style: chrome - 27 mm socket.
  • Fits: Discovery Series II | '99 - '04 Range Rover 4.0 (P38) | '95 - '02 Range Rover 4.6 (P38) | '95 - '02.
Check Stock