Reviews Alignment Wheel Clamps

QuickTrick Large Wheel Alignment Kit Complete for Both Sides - Truck Semi Bus Firetruck

  • OTR Alignment, dually alignment tool, rv alignment tool, sprint wheel alignment.
Check Stock

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • 【Cabinet Clamps】Cabinet Clamps made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamp’s body and the side jaw are cast steel for long-term durability and tightness..
  • 【Dimensions】The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door ....
Check Stock

Toolwiz Universal Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tools for Car Truck RV Tire Repair Caster Alignment Castor Wheel Gauge Camber Alignment Tools Camber Gauge

  • Universal automotive tool for wheel alignment, caster camber gauge compatible with BMW, Benz, Chevrolet, Toyota, Honda, Jeep, Citroen..
  • This Wheel Alignment Balancing Tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension....
  • The alignment gauge is suitable for accurate checking of the castor and camber angle. Measures the camber and caster angle on the wheel hub or brake....
  • With it's strong magnetic attraction, the camber alignment tool can easily attached on all kind metal surfaces..
  • Alignment tools automotive: Easy to read through accurate scale with range of measurement from -5 up to +5 degrees. You can ask seller for sending....
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

KIPA Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tool for Truck Car RV Tire Repair New Top Strong Magnetic Absorb Ingenious Design Practical Circular end Mounting

  • This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check....
  • Top Quality: KIPA Wheel Alignment tool is made of solid Alloy, Well-CNC machined, Accurate and durable must-tool for wheel alignment adjustment..
  • Universial Automotive Tool For Wheel Alignment, Easy to use, Save you a lot of cost, You could Do the alignment works at home easily..
  • It has a powerful magnet could be easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before....
  • The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or....
Check Stock

VEVOR Post Puller 42\ Long Chain Fence Post Puller 32\ Standing Frame Wood Post Puller Set with Lifting Chain Puller Stump Puller Fence Post Remover for Round Fence Post, Metal, Sign Post & Tree Stump

  • 【Specification】Capacity: 6600LBS/3Tons；Min.Height: 135mm/5.31"；Max Height: 420mm/16.54"；Shipping weight: 44LB.
  • 【Application】When single side needs to be lifted.Go above water in sand or muddy road.Escape when single wheel sinks into ditches.Cross ditches.Preferred jacking tool on frame racks, alignment machines and in all types of repair shops.Can be used on frame or alignment machine, or on the floor. With its best quality, you can expect years of trouble-free use..
  • 【Easy Storage&Fast Use】Handy and easy storage, Rapid, labor saving, Lager stressed area, fits on soft and easy-collapsing terrain.Triple bag jack is the easiest and fastest way to install pinch weld clamps on the frame machine..
  • 【Warm Tips】This 3 Ton Pneumatic Air Jack with the design of compact and lightweight provides quick up and down positioning. Before lifting your vehicle, please check carefully whether there are sharp objects nearby, as they may hurt the air jack and vehicle..
  • 【Easy Use】Inflated with compressed air, they are easy to handle, and they are easier to handle without load than spring types..
Check Stock

HORI Racing Wheel Overdrive for Xbox One Officially Licensed by Microsoft

  • Full-size racing wheel and pedals optimized for authentic racing simulation.
  • 270 degree turn radius with adjustable output options.
  • The product is not compatible with Xbox 360 and Windows PCDescriptionHORI brings the best in build-quality, customization options, and authentic racing simulation with the Racing Wheel Overdrive. HORI's Tokyo design team has brought all the features and quality of a full-size racing wheel at an aggressive price. Massive 270 degree turn-ratio - Completely programmable & adjustable - Xbox One compatible. The Racing Wheel Overdrive clamps securely to your table or racing wheel stand with sturdy clamps and steel parts. The full size pedals are built to last. Change from 270 degree to 180 degree turn ratio on the fly and fine tune other settings such as dead zone, pedal sensitivity and more. Get in the race with the all new RWO: Racing Wheel Overdrive for Xbox One. Officially licensed by Microsoft..
Check Stock

KUNTEC Wheel Alignment Turntable Turn Plates with Transition Bridge and Thrust Block

  • The alignment turn plate is made of durable metal with a dimension of 14" x 14"，All Steel construction Turntable base is 13 1/2" diameter.
  • The Beautiful Brass Finish Dial Allows up to 50 Degrees Left or Right from Centerline (Rotation Allows up to 360 Degrees).
  • The 13-3/8" Top Rotating Plates Allows a 2" Slide Tolerance for Wheels that Moves Up or Down when Turning.
  • Each alignment turn plates supports up to 1.5 Tons of Weight Capacity, Allowing up to 3 Tons of Weight when used in Pairs.
  • Wheel alignment tool comes with Two (2) Bonus Small Wheel Chocks and Two (2) Bonus Plastic Turners.
Check Stock

Bike Alignment Tool, Bicycle Derailleur Hanger Alignment Gauge, Aluminum Alloy Ranging Tool Bike Repair Tool Orange

  • --Provides a simple, accurate means for checking hanger alignment and for straightening hangers that are not properly aligned.
  • --The tool threads directly into the derailleur hanger. The gauge bar holds a gauge to mark the distance to the wheel..
  • --The gauge is rotated with the wheel to the 3, 6, 9, and 12 o'clock positions, noting any differences in measurements..
  • --The alignment of the derailleur hanger is accomplished by applying pressure to the tool's arm. The results can be checked instantly..
  • --Function: Proper alignment of a bike's derailleur hanger is important for reliable shifting. While a derailleur hanger can be bent when a bike is crashed or dropped on its side, even new frames often have misaligned hangers. Provides a simple, accurate means for checking hanger alignment and for straightening hangers that are not properly aligned..
Check Stock

2PCS Wheel Alignment Tool Turn Plates 5 Ton Aluminum Turntable Wheel Alignment 360° Rotating Turn Plate Table for Car Truck

  • 【Professional Wheel Alignment Tool Turn Plates】This product is specially designed for car truck wheel alignment, put the car on the turntable, the locking pin can fix the turntable in place, which plays an important role in the four-wheel alignment process. Ideal for mechanics or do-it-yourselfers..
  • 【Superior Quality】This product is made of high-quality aviation magnesium alloy, which is strong and durable, and light in weight, which can significantly reduce the weight of the vehicle and reduce energy consumption. And has high strength and high toughness, not easy to oxidize and rust..
  • 【High Performance】This product adopts a full floating ball bearing design, with low friction force and more flexible and fast operation. Strong bearing capacity, can bear the weight of 5 tons. And there are goniometers and needles on it to help you assess caster, camber and steering alignment..
  • 【Complete Kit】This product includes two corner discs, two rubber transition blocks, and two rubber thrust pads. Perfect for any garage or auto shop use..
  • 【Quality Assurance】Our products have undergone strict quality inspection procedures to ensure that the products put into the market are of high quality. If you have any questions, please feel free to contact us.....
Check Stock

VEVOR Wheel Alignment Tool, 6 Probes Toe Plates, LED Toe Alignment Plates, Double 16Ft Tape Measures Alignment Tools Automotive, Charging Toe Alignment Tool, Wheel Alignment Tool Gauge Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform and provides long-term service. Wheel alignment plates are equipped with 6 probe feet to facilitate your measurement. The 0.1-precision digital screen displays the data you want..
  • Stand off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allows each of our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Slots and Magnets: Masterful cut slots can directly clamp the tape measure head, not easy to fall. In addition, magnetic strips are provided, which you can paste on the slot to fix the tape measure head firmly..
  • Unrestricted Use: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you ....
Check Stock

VEVOR Wheel Alignment Tool, 6 Probes Toe Plates, LED Toe Alignment Plates, Double 16Ft Tape Measures Alignment Tools Automotive, Charging Toe Alignment Tool, Wheel Alignment Tool Gauge Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform and provides long-term service. Wheel alignment plates are equipped with 6 probe feet to facilitate your measurement. The 0.1-precision digital screen displays the data you want..
  • Stand Off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allows each of our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Slots and Magnets: Masterful cut slots can directly clamp the tape measure head, not easy to fall. In addition, magnetic strips are provided, which you can paste on the slot to fix the tape measure head firmly..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock