Reviews Air Suspension Height Sensor

TCT-MT Adjustable Rear Air Ride Suspension Kit w/Air Tank Fits for Harley Davidson Harley Touring Bagger Electra Street Road Glide Road King CVO 1994-2022

  • Adjustable Rear Air Ride Suspension Kit w/Air Tank Fit for Harley Davidson Harley Touring Bagger Electra Street Road Glide Road King CVO 1994-2022.
  • otes: Need modification to install the AIR TANK with dual exhausts.
  • Adjustable Rear Air Ride Suspension Kit Fully Collapsed approx. 9.64inches(24.5cm).
  • This Adjustable Rear Air Ride Suspension Kit will allow you to lower your bike 2 to 3 inches with all of the air released, The air it up to stock ride height for a smooth ride in a matter of seconds.
  • Adjustable Rear Air Ride Suspension Kit Fitment: Fits For all Harley touring models 1994-2019 Street Glide Road Glide Electra Glide Road King.
  • Package Included : One Air Ride Kit with air thank (as shown on the first picture). PLEASE CHECK THE DESCRIPTION FOR MORE DETAILS!.
Check Stock

Monroe Shocks & Struts Monroe 90007C Air Shock to Load Assist Shock Conversion Kit

  • CONVERT YOUR RIDE -- A cost-effective alternative to replacing the OE system, this conversion kit converts a factory air to a conventional suspension.
  • COMPLETE SOLUTION -- Includes full instructions and premium-quality replacement components - application-tuned shock/strut, coil spring(s), brackets, and necessary mounting hardware.
  • EASY TO INSTALL -- Engineered for superior fit and trouble-free bolt-on installation.
  • KEEPS AIR SUSPENSION LIGHT OFF -- A complete solution to keep the air suspension light off.
  • IMPROVED RIDE AND HANDLING -- Provides application specific tuning for added control while heavy gauge calibrated coil spring provides maximum performance without an increase in ride harshness.
  • INCLUDES MONROE LOAD-ADJUSTING SHOCK -- Assists in maintaining ride height when loaded with additional weight of up to 1,200 lbs (capacity is limited by vehicle suspension, tires, and transmission - see vehicle owner's manual for details).
Check Stock

XCEL Super Versatile Rubber Pads with Strong Adhesive, Great Vibration Damping Pads, Perfect for Loud Washing Machines, Acoustic Foam Pad, Made in USA (3 Pack - 6\ x 6\ x 1/2\)

  • Premium Material: The shocks absorber is made of premium metal, copper, and rubber, you can use it for a long time. The air spring strut is designed to maintain vehicle height level even carrying an uneven load,can hold air pressure and eliminate sag caused by leaking air suspension..
  • Ideal Size: Cab shock, length: 20.7cm/8.1inch, Width: 11.9cm/4.7inch, Height: 59.5cm /23.4inch. The air suspension can compress the air in a elastic closed container so that it can work effectively. Professional assembly is highly recommended..
  • Standard Quality: Our Cab Air Shock is made to meet or even exceed the standard qulity. When added altitude controller in the air spring, the height of car can change with load.This air spring is constructed with high quality material, you can use it for a long time..
  • Great Performance: Cab Shock Air Bag Absorber. No squeaking noise, long durability. Keep your vehicle's tires in contact with the road. Restore your vehicle original ride, handling and control performance. Reduce vehicle bounce, roll and sway, brake dive and acceleration squat..
  • Wide Fitment: Air shocks is compatible with International Prostar Pro 2008-2017. 3595977C96, 3595977C95. The assembly of this article requires expert knowledge! After assembly, however, before t....
Check Stock

Dayton 1UHH4 Line Voltage Control, Heat, Cool, Analog

  • Price For: Each Cooling Full Load @ 120V: 13.8A Voltage Range: 110 to 125VAC Enclosure Type: Steel Color: Black Switch Action: Close On Rise Includes: 6 ft. Cord Standards: ETL C/US Switch Type: SPST Number of Switches: 1 Sensor Type: Bi-Metal Height: 5-1/2" Features: HSJ Cord with Piggyback Plug, Mount with Suspension Chain or Wire.
  • Control Range: -10 Degrees to 100 Degrees F Differential: 6 to 8 Degrees F Full Load Amps: 13.8A Number of Relay Inputs: 1 Number of Relay Outputs: 1 Input Voltage: 120VAC Locked Rotor Amps @ 120V: 58.8A Application: Cooling Only Inductive Amps @ 120V: 13.8A Cooling Locked Rotor @ 120V: 58.8A Contact Rating Resistive @ 120V: 13.8A Mounting Type: Suspension Chain or Wire Item: Line Volt Mechanical Tstat.
  • Full Load Amps @ 120V: 15A Depth: 2" Width: 2-1/2" Number of Stages: 1 Country of Origin (subject to change): China.
Check Stock

Drop & Ride

  • MaxTrac Suspension 201220 Lowering Kit Box.
  • All Necessary Hardware to Complete Installation.
Check Stock

Ergodyne Skullerz 8950 Bump Cap Long Brim - Black -Pack 6

  • LIGHTWEIGHT - High-density polyethylene (HDPE) shell is 15% lighter weight than PC-ABS hard hats.
  • MULTI-POINT ADJUSTMENT - One-handed LockFit ratchet offers 36 points of adjustment for a custom, secure fit.
  • BREATHABLE - Flexible open suspension frame and always-open venting improve air circulation and make for a cooler hard hat in the heat.
  • ALL-DAY COMFORT - Removable foam-backed hard hat sweatband is breathable and washable.
  • HEIGHT ADJUSTABLE 6-POINT SUSPENSION - For a more customized comfortable fit and better dispersion of force (compared to 4-point systems).
  • LOCKFIT RATCHET - For easy size adjustment.
  • SWIVELING SUSPENSION - Pivots up and down to clear bandana or ponytail knots and improve fit.
Check Stock

Monroe Shocks & Struts Max-Air MA785 Air Shock Absorber

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Supreme Suspensions - 3.5" Front + 3" Rear Lift Kit for 2007-2019 Chevy Silverado/GMC Sierra 1500 2WD/4WD - Full Suspension Lift Kit with Rear Shock Mount Extenders (Black)

  • ...(6-LUG - 2WD 4WD). *Does NOT fit 2007 Classic / TrailBoss / AT4 Models, 2015+ vehicles equipped with factory stamped steel UCA, or 2019 models with 5/8 Rear Center Pin. This kit is NOT compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System..
  • NOTE FOR Z71 / LTZ OWNERS: *Some LTZ/Z71 Models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. Please check block size before ordering as our lift block is intended to replace any factory equipped blocks..
  • TECHNICAL NOTES: 3.5 inch front and 3 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. IMPORTANT NOTE: Installation of Aftermarket Uniball UCA is highly recommended after lifting the front end by 2.5", or more. The upper ball joint will wear out rapidly with use of stock UCA..
  • HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy....
Check Stock

TESGO 27.5\ Electric Mountain Bike CLG Electric Bike for Adults 750W Peak- Upgrade Torque Sensor - Full Suspension- EBike with 48V 16Ah Battery- 9-Speed Gear, Adult Electric Bicycles, UL Certified

  • ...SOR SYSTEM: Our TESGO adult ebike of the challenger is equipped with a torque sensor that works by detecting the output torque of human power and then delivers just the right amount of power to the motor. With a torque sensor, your pedal's force can control the speed easily. You will get pleasant on your trip..
  • FULL SUSPENSION SYSTEM: The lockable front air fork and quad-link rear shock constitute the full suspension. Therefore, the bicycle fits all-terrain, and you will feel less fatigue and enjoy smoother riding. Ride with the bike, you will get a more comfortable ride experience..
  • REMOVEABLE & LOCKABLE BATTERY: Built-in 48V 16AH detachable battery with long-range capacity power assists in traveling up to 50 miles with a full charge every time. And the battery is hidden in the frame, which not only can be secured for anti-theft but also avoids drop-out during furious riding..
  • PROFESSIONAL 9-SPEED SHIFT: S-ride 9-speed gear provides accurate and smooth shifting capability, you can shift the gear fluently. When you want to enjoy different speeds, our electric mountain bike can help you to experience it..
Check Stock

Monroe Shocks & Struts Max-Air MA834 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting avoids air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA705 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA759 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA805 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock