Reviews Air Spring Valves
Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)
- Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
- Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
- INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
- The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
- Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check StockDraft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)
- Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
- Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
- INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
- The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
- Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check StockTub Drain Remover Wrench - Use to Install and Remove Most Bath and Shower Drains and Closet Spuds Square Plastic Toilet Seat Nuts
- [WHAT YOU GET] – You will get 2Pcs hexagon key adapters for air conditioning ratchet wrench, provides access to 3/16-Inch and 5/16-Inch hard to reach valves..
- [FEATURES] – Spring loaded ball bearing on hex adapter locks securely into HVAC service wrench..
- [WIDE APPLICATION] – The A.I.FORCE Hex Key Adapters are designed to open and close the compressor service valve, rotalock valves and shutoff valves on air condition, refrigeration and other equipment, although there is very limited space..
- [COMPATIBILITY] – The HVAC Service Hex Key Adapters fit for 1/4-Inch square wrench opening on Ratcheting Wrench, and compatible with 3/16" and 5/16" hex valves..
- [PREMIUM QUALITY] - The A.I.FORCE Service Hex Key Adapters are constructed to last with high grade steel alloy, heat-treated for maximum strength..
Check Stock2Pcs Hex Key Adapter for HVAC Service Ratcheting Wrench, 1/4-Inch Square to 3/16 and 5/16-Inch Hex, For HVAC Compressor Service Valve, Rotalock Valves Open or Close
- [WHAT YOU GET] – You will get 2Pcs hexagon key adapters for air conditioning ratchet wrench, provides access to 3/16-Inch and 5/16-Inch hard to reach valves..
- [FEATURES] – Spring loaded ball bearing on hex adapter locks securely into HVAC service wrench..
- [WIDE APPLICATION] – The A.I.FORCE Hex Key Adapters are designed to open and close the compressor service valve, rotalock valves and shutoff valves on air condition, refrigeration and other equipment, although there is very limited space..
- [COMPATIBILITY] – The HVAC Service Hex Key Adapters fit for 1/4-Inch square wrench opening on Ratcheting Wrench, and compatible with 3/16" and 5/16" hex valves..
- [PREMIUM QUALITY] - The A.I.FORCE Service Hex Key Adapters are constructed to last with high grade steel alloy, heat-treated for maximum strength..
Check StockFirestone Ride-Rite 2598 Ride-Rite Air Helper Spring Kit Rear
- Incl. Air Helper Springs Supports Hardware Air Line And Inflation Valves No Drilling Required Ride-Rite Air Helper Spring Kit.
- Load leveling capacity up to 5, 000 lbs..
Check StockDAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch
- Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
- Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
- Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
- Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
- Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check StockSwimWays Inflatable Infant Baby Spring Swimming Pool Float with Canopy, Blue
- Designed with a wide base, child safety valves, and dual air chambers for enhanced security.
- Fabric covered inflation provides durability and a patented inner spring adds stability to the float in the water.
- Features a patented inner spring around the outside edge of the float for greater stability in the water.
- Soft mesh seat with secure leg holes for comfort.
- Fabric covered infant float for babies 9 months and over.
Check StockHotSpot/Caldera Spas Replacement Spa Pillow - 76113
- Replacement for: Hot Spot Relay 2010-Current, Hot Spot Rhythm 2010-Current, Hot Spot Tempo 2010-Current, Caldera Palatino 2010-Current, Caldera Marino 2010-Current, Caldera Vanto 2011-Current, Caldera Aventine 2010-Current and Caldera Tarino 2013-Current..
- Replace worn out Hot Springs Hot Tub pillows with our Watkins Replacement Pillow! Your spa will have a fresh new look and restored comfort with a new spa neck pillow..
- Hot Spring Spa Supplies carries spa fragrances, air & water valves, control systems, filter accessories, lights, cleaners, pumps, thermostats, and more for virtually every hot spring model..
Check StockSwimWays Toddler Spring Float for Swimming Pool - Blue
- TODDLER SPRING FLOAT: The Toddler Spring Float is perfect to bridge the gap between your child sitting in our Baby Spring Floats, to wearing our Power Swim and Swim Sweaters!.
- SOFT AND COMFORTABLE: The inflatable toddler pool float has fabric covered inflation for added durability, a soft mesh seat with cutouts for the arms to begin developing those all-important paddling movements..
- SAFETY MINDED: The wide base, child safety valves, and dual air chambers ensure security, the sun canopy provides up protection..
- EASY TRANSPORTATION: The float comes with a removable sun canopy, a reusable carry bag and the float folds flat into 3 compact circles making it a great choice for travel or trips to the neighborhood pool..
- DIMENSIONS: 30 X 30 X 38 inches, for children 2-4 years..
- Covered by the Spin Master Care Commitment. See below for full details.
Check StockAll Balls Racing 46-4037 Air Cut Off Valve Rebuild Kit,Red
- Suzuki VS800GL Intruder 1992 - 2009. Suzuki VZ800 Marauder 1997 - 2004..
- Kit Includes all necessary parts to rebuild the air cut off valve circuit. motorcycle models with multiple carburetors include components to repair all carburetors..
- Kit includes necessary O-rings, diaphragm, spring, screws..
- Improperly functioning air cut off valves can stick open closed causing popping on deceleration conditions..
Check StockLisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool
- Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
- Smallest size also works on automatic adjusting air suspension systems for automobiles.
- Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
- Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
- Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
- Set comes with five popular sizes: 1/8"-5/32.
Check StockEASTROCK Bb Trumpet Cupronickel Intermediate Double-Braced Trumpet Instrument with Carrying Case,Gloves, 7C Mouthpiece
- Bb (B flat) Trumpet - Eastrock Intermediate Double-Braced Trumpet,Solid and durable Cupronickel body, excellent spraying process,its sound is excellent and bright, penetrating, abundant and powerful, excellent vibration..
- Design And Process--11.65mm/0.460inch pipe & 125mm/4.92inch bell mouth, The valve is durable, Spring rebounds quickly Good air tightness,There is resistance when pulling out the adjusting tubes, and the water key has good air tightness,Environmental protection and no harm to health..
- Beautiful Shape--Valves will accurately link each piping ,Smooth action valves and comfortable buttons,Highly durable piston valve lengthening the life of the instrument while maximizing sound quality..
- Includes - Trumpet,a pair of white gloves, Soft polishing cloth,Silver plated 7C mouthpiece,Hard case with backpack straps and zipper pocket.【Pay Attention to Cleaning and Maintenance】.
- No-hassle warranty - If the instrument ever fails due to manufacturing defects,We promise, for as long as you own the instrument and have proof of purchase, we'll provide you with parts for free ,feel free to reach us by message to contact our support team..
Check StockiPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\
- Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
- Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
- One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
- Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
- Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock