Reviews Air Intake Hoses

Golden Selection Engine Filter Air Intake Duct Hose Kit Compatible With Honda Accord 2.3 2.3L L4 1998 1999 2000 98 99 00 17228-PAA-A00 696-034 17228PAAA00 696034

  • Replacement air intake hose compatible with Honda Accord 1998 1999 2000 2.3L. Replacement for the factory air intake hose of your 98 99 00 01 Accord..
  • Air Intake Hose is also an air filter hose, boot, or tube connects to your vehicle’s air to the intake manifold bolted to the engine. To avoid....
  • While this is NOT a genuine OEM part, reliable OE finished air intake hoses are built with high quality rubber for high temperature and dry....
  • Interchange numbers compatible with this air intake hose: 17228-PAA-A00 696-034 17228PAAA00 696034.
  • This air intake hose compatible with Accord comes complete with warranty. If the intake hose cracks, defects, or breaks in anyway, please do not....
Check Stock

KATUMO Gasoline Siphone Hose, Gas Oil Water Fuel Transfer Siphon Pump, Portable Widely Use Hand Fuel Pump, Fuel Transfer Pump with 2 Durable PVC Hoses

  • ✓ The Wekster multi-use self priming siphon liquid transfer pump kit includes 2 long hoses with a dipstick tube, safely extracting & inserting liquids like oil gas and water. And an air pumping hose and adapter for inflating air into tires etc..
  • ✓ SPECS: Gas Syphon Pump with intake & discharge tubes: 9” - 2 Hoses (with black connectors): each 50”/127cm, OD: 1/2” ID: 11/32” – Dipstick tube: 48”, OD: 1/4” ID: 1/8” – Air pressure tube: 15”, OD: 7/16” ID: 1/8”.
  • ✓ QUALITY: Durable hard plastic fluid pump provides perfect pressure with rapid siphoning transfer, and thick plastic hoses to ensure no leakage or slops - Rubber dipstick tube transfers oil without melting from heat – High-quality acid & water chemicals resistant equipment..
  • ✓ DESIGN: The gas siphon hand pump has Smooth action handle with 2 long flexible red hoses that reaches anywhere – Extractor dipstick tube sucks oil from any vehicle - Easy Assemble/Disassemble of the fuel siphon pump is great for efficient cleaning..
  • ✓ USES: Easy large hand vacuum pump with intake & discharge transfer system for motor oil changes, overfilled tanks, off season storage, refueling empty tank from gasoline container, draining transmission petrol fuel, diesel & gas from cars....
Check Stock

Spectre Performance 8711 Vacuum Sensor Adapter Kit

  • Attach vacuum lines almost anywhere on intake tube.
  • For use with our modular intake systems where vacuum hoses are required.
  • Includes 2 hole saws, 6 grommets and 10 fittings to fit all popular vacuum lines and air sensors.
  • Fits all popular vacuum lines and air sensors.
Check Stock

Air Cleaner Intake Filter System Kit For Harley Davidson Sportster XL883 XL883N XL883R XL883P XL1200 XL1200L XL1200X Iron 883 Forty Eight XL1200X 2004-2016 Billet Aluminum CNC Machined Washable

  • New Designed Sport CNC machined Plate Air Filter intake system kit For Harley motorcycle,Internal breathing system - clean installation - No hoses, No....
  • Air filter intake system filter kit for 2004 Harley-Davidson Sportster 883 Deluxe/ Hugger XLH883/ XLH883.
  • Air filter intake system filter kit for 2006 Harley-Davidson Sportster 883 Custom XL883C/ Low XL883L/ Police XL883P/ Roadster XL883R.
  • Air filter intake system filter kit for 2007 Harley-Davidson Sportster 883 Custom XL883C/ Low XL883L/ Police XL883P/ Roadster XL883R/ XL883.
  • Air filter intake system filter kit for 2011 Harley-Davidson Sportster 1200 Custom Police XL1200CP/ Custom XL1200C/ Low XL1200L/ Nightster XL1200N/....
Check Stock

A-Premium Air Flow Meter Boot Intake Hose Tube to Throttle Body Replacement for BMW E46 323i 323Ci 325i 325Ci 328i 1999-2006 Z3

  • 【Vehicle Fitment】Compatible with BMW (E46 Series) 320i 2001-2005 2.2L, 323Ci 2000 2.5L, 323i 1999-2000 2.5L, 323i 2006 2.5L, 325Ci 2001-2006 2.5L, 325i/325xi 2001-2005 2.5L, 325xi 2006 3.0L, 328i 1999-2000 2.8L, (E36 Series) Z3 2000 2.0L, 2001-2002 2.2L, 1997-2000 2.8L.
  • 【Specification】With 1PC Black Air Intake Hose (Inside Diameter 3 inch, Length for 8 inch and Outside Diameter 3 inch).
  • End 1 Shape for Molded Assembly, Shape for Molded Assembly and Material for Rubber.
  • 【Buy with Confidence】Our air intake hoses are made of rubber materials that contain the component of high-tenacity fibre. With the high quality and reliable of performnace that not only enhance antioxidant and anti-aging, but also fully resist cracking caused by drying and prevent soften from high temperature..
  • 【Importance of Parts】The air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects the air filter box and the intake manifold. As you checking engine light (CEL), poor fuel economy and hesitation during acceleration maybe caused by your air intake hose develops cracks or small holes, under these circumstances, you need replace it timely..
  • 【Reference Number】(Make sure this part fits your vehicle exactly....
Check Stock

Red Hound Auto 2 Air Cleaner Intake Hoses Compatible with Toyota (Camry 1997-2001, Solara 1999-2003) 3.0L Rubber Boot 1999-2003

  • Approximately 3-1/8" x 3-7/16" (2-3/4" inside diameter).
  • Connects air cleaner box and MAF sensor to engine.
  • Compatible with Toyota/Lexus: 1998-2001 ES300, 1999-2003 Solara (3.0L), 1997-2001 Camry (3.0L), 1997-1999 Avalon.
  • Premium Heavy Duty Automotive Grade Black Rubber.
  • Reference: 17881-20090 1788120090 696-725 696725.
Check Stock

Money Tree

  • ...parator travels freely past the center baffle and smooths the airstream path which minimizes its impact on the performance of the vacuum and raises efficiency.
  • Designed around industry standard vacuums and hoses to make connecting the separator easy and efficient with minimal need for adaptors or duct tape. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums and their hoses like Rigid, Shop Vac, Vacmaster, Dewalt, and many other brands. The hoses will fit male into the 2.375” inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 2.5” dust collection wire support hoses commonly used in home and commercial workshops.
  • Commercial grade rubber mounting gasket insures against air leaks that can rob performance.
  • Ideal for use in a broad range of applications including woodworking, auto body detail shops, commercial painters, sheet rock installation and repair, remodelers, construction clean-up contractors, stone counter top production shops, hard wood floor refinishers, liquid capture, gardening, and slurry collection.
Check Stock

Camco TastePURE RV Water Filter with Flexible Hose Protector (40043)

  • This Accessory hose kit includes all the hoses required for use with a standard fresh water tank..
  • (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters..
  • (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump.
  • Fits standard tanks with 1.25" water fill port and 3/8" NPT connections..
Check Stock

Norcold 621156BW RV Trailer Camper Appliances Service Vent Door Plastic Bright White

  • ...bo, exquisite tempered glass panel, matching different decoration. Simple atmosphere, high temperature resistance and corrosion resistance, easy to clean and arrange. Stainless steel drip tray, handling and cleaning is more convenient. Fixed pot rack while moving, safer and more convenient..
  • 【THREE DIMENSIONAL AIR INTAKE】Three-dimensional air intake structure. Multi-directional air supplementation, effective combustion, and even heat at the bottom of the pot.
  • Mixed air intake system, constant pressure direct injection, better oxygen replenishment.
  • Multi-dimensional air nozzle, air premixing, reducing combustion exhaust gas..
  • 【MAIN PARAMETERS】Mode: GR-600L with Faucet, Gas type: LPG (Liquefied Petroleum Gas), Material: 304 stainless steel sink + black tempered glass lid, Flame failure device: Yes, Thickness: 0.03'', Overall size: 20.5'' x 16.7'' x 6'', Gas tube diameter: 4'', Faucet Installation Holecut Size: 1.42'', Water Drain Holecut Size: 1.6'', Package size: 21'' x 17'' x 7'', Shipping weight: 16 lbs. Components: water drain plug, hose, electronic igniter, cold hot water hoses, installation hardware..
  • 【FREE FIRE ADJUSTMENT】Multi-level fire adjustment, free firepower, knob control, different ingredients correspond to different heat, easy ....
Check Stock

WYNNsky 10FT Vacuum Tubing Hose, 0.12'' (3MM) ID, 0.27'' (7MM) OD, High Temperature Silicone Material, -76℉ to 374℉, 60PSI Max Working Pressure Automotive Replacement Vacuum Hose

  • Application: WYNNsky vacuum hoses are quite an inexpensive and practical performance modification for most all types of vehicles..
  • Material: Manufactured from a high-grade silicone, these vacuum hoses facilitate superior temperature resistance, will last longer than rubber hoses, and won't deform, even under extreme conditions..
  • High Temperature: WYNNsky silicone vacuum hoses are ideal for cooling/heating and high-power forced induction applications. -76℉ to 374℉..
  • Hose Standard: 0.12'' (3MM) ID, 0.27'' (7MM) OD, 2MM wall thickness, 60 PSI Maximum pressure rating..
  • This silicone vacuum hose applies to general purpose air or water transportation in the engine bay, great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system..
Check Stock

Cen-Tec Systems 95798 Quick Click Dust Collection Separator, Black

  • ...parator travels freely past the center baffle and smooths the airstream path which minimizes its impact on the performance of the vacuum and raises efficiency.
  • Designed around industry standard vacuums and hoses to make connecting the separator easy and efficient with minimal need for adaptors or duct tape. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums and their hoses like Rigid, Shop Vac, Vacmaster, Dewalt, and many other brands. The hoses will fit male into the 2.375” inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 2.5” dust collection wire support hoses commonly used in home and commercial workshops.
  • Commercial grade rubber mounting gasket insures against air leaks that can rob performance.
  • Ideal for use in a broad range of applications including woodworking, auto body detail shops, commercial painters, sheet rock installation and repair, remodelers, construction clean-up contractors, stone counter top production shops, hard wood floor refinishers, liquid capture, gardening, and slurry collection.
Check Stock

Mishimoto MMAI-E46-99BK Performance Air Intake Compatible With BMW E46 3-Series 1999-2005 Black

  • Direct fit for the 1999-2005 BMW 323i/325i/328i.
  • 84% increase in filter surface area compared to the stock filter.
  • Works with stock and Mishimoto intake hoses.
  • Powder-coated heatshield keeps unwanted hot air from entering the air filter.
Check Stock

Rtunes Racing Cold Air Intake Kit + Filter Combo RED Compatible For 00-05 Toyota Celica GT/GTS

  • The air intake kit can help your engine to draw more cold air resulting in better throttle response and higher explosive horsepower output.
  • All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture.
  • No additional parts will be needed for installation after you purchase this kit.
  • High quality built Washable and Reusable Air Filter as shown in the picture.
Check Stock