Reviews Air Intake Boot

Air Intake Hose - Compatible with Honda Accord V6 2003-2007 and Acura TL 2004-2006 - Replaces 17228-RCA-A00 696-001

  • Replacement Air Intake Hose - This air intake hose some times known as an intake duct, intake boot, or intake tube is located between the air intake....
  • Compatible Replacement for Honda Accord & Acura TL - This air intake hose is a direct replacement for the factory air intake hose on Accord V6 3.0....
  • Replaces Part# - 17228-RCA-A00, 17228RCAA00, 17228 RCA A00, 696-001, 696001 This air intake hose is a direct replacement for these part numbers which....
  • OEM Fit, Quality, Finish - This air intake hose is constructed of a high temperature rubber that will not break down and crack like the factory hose.....
  • Lifetime Warranty - This air intake hose for your Accord or TL comes complete with a Lifetime warranty. If the intake hose cracks, chips, or breaks in....
Check Stock

Golden Selection Engine Filter Air Intake Duct Hose Kit Compatible With Honda Accord 2.3 2.3L L4 1998 1999 2000 98 99 00 17228-PAA-A00 696-034 17228PAAA00 696034

  • Replacement air intake hose compatible with Honda Accord 1998 1999 2000 2.3L. Replacement for the factory air intake hose of your 98 99 00 01 Accord..
  • Air Intake Hose is also an air filter hose, boot, or tube connects to your vehicle’s air to the intake manifold bolted to the engine. To avoid....
  • While this is NOT a genuine OEM part, reliable OE finished air intake hoses are built with high quality rubber for high temperature and dry....
  • Interchange numbers compatible with this air intake hose: 17228-PAA-A00 696-034 17228PAAA00 696034.
  • This air intake hose compatible with Accord comes complete with warranty. If the intake hose cracks, defects, or breaks in anyway, please do not....
Check Stock

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number：3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

  • ★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
  • ★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot；1 x Gasket；2 x Screw.
  • ★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..
Check Stock

NIBBI Orginal High Performance CQR Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike Kawasaki CQR250 CRF

  • CQR Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike Kawasaki CQR250 CRF.
  • 33mm rubber fit for 26mm 28mm 30mm carburetor..
  • Rubber Side: 33mm, and rubber joint is 1 3/8 inch.
Check Stock

labwork Carburetor Carb Intake Boot Joint Replacement for Yamaha XT225 TTR225 2LN-13586-01 Stock Joint

  • 1. The Intake Bootfit Replacement for Yamaha TT-R 225 1999-2004, Replacement for Yamaha XT225 Serow Dualsport 1992-2000, Replacement for Yamaha XT225 Dualsport 2001-2007..
  • 2. Our carburetor interface intake boot joint professional workmanship, stable performance, high reliability..
  • 3. The intake joint is easy to install, A direct and great replacement for the old or damaged intake joint..
  • 4. Made of high quality material, good corrosion protection, optimal durability..
  • 5. Please verify this is the right part number before ordering..
Check Stock

BMW Genuine Air Hose Connector to Intake Boot for 3 5 Z3 Series E39 E46 OEM for 320i 325Ci 325i 325xi 330Ci 330i 330xi 525i 530i Z3 2.5i Z3 3.0i

  • BMW Genuine Air Hose Connector Air Hose to Intake Boot ..
  • Manufacturer Warranty: 12 months / 12000 miles.
  • Please see Product Description below for compatible models..
Check Stock

Air Flow Intake Cover, 2pcs Carbon Fiber Style Car Air Flow Intake Decorative Scoop Bonnet Vent Hood Cover Universal Air Flow Vent Protection Cover Hood Scoops For Cars car hood vent

  • Quality Material -- Car ABS Decorative Air Flow Intake Scoop Turbo Bonnet Vent Cover made of automotive grade ABS plastic, lightweight and extremely durable..
  • Decoration for Car -- Air Flow Intake Scoop makes your car special cool and distinctive, dramatically improves your car's styling. Car air flow sticker,unique look,cover up the damage,makes your car look amazing new and being improved in grades..
  • Easy To Use -- With adhesive tape attached in the back, easy to install and will not damage your car paint when you remove it later..
  • Function -- Let air go through the scoop in engine area, keeps engine bonnet in cool condition. Suitable for most vehicles with engine hood..
  • Universal Fit -- Air Flow Intake Scoop Hood is easy to install, you can stick this on any part of car surface. This fast and easy decoration makes your vehicle stand out from others. universal fit for all cars..
  • Quality Material -- Car ABS Decorative Air Flow Intake Scoop Turb....
Check Stock

Air Cleaner Intake Hose Tube for BMW E53 X5 3.0i 2001 2002 2003 2004 2005 2006 13541440102 Air Mass Meter Boot Duct

  • Replaces part # 13 54 1 440 102, 13541440102.
  • Fits for 2001 2002 2003 2004 2005 2006 BMW E53 X5 3.0i Engine.
  • Package include: 1 x Air Intake Boot Tube Hose, 1 x pair of Nylon Gloves.
  • Please check the part number and pictures provided before ordering.
Check Stock

X AUTOHAUX Car Engine Air Intake Hose Air Filter Hose for BMW X6 X5 13717571344 13717624210

  • Fit for BMW X6 2008-2010, for BMW X6 2013-2014, for BMW X5 2011-2013.Please make sure the part numbers whether match the part before you are replacing..
  • The Air Intake Hose is made of material which is durable and resists the drying and cracking, provides a long service life..
  • Easy to install, perfectly match your car..
  • The air intake hose is mounted between air intake box and throttle body on your vehicle.When the air intake hose, which is the tube piece that connects the air filter box and the intake manifold, becomes old or possibly even cracks, it will not functional appropriately..
Check Stock

X AUTOHAUX Car Engine Air Intake Hose Air Filter Hose for BMW X6 2008-2018 for BMW X5 2000-2018 13717571350

  • Fit for BMW X6 2008-2018, for BMW X5 2000-2018.Please make sure the part numbers whether match the part before you are replacing..
  • The Air Intake Hose is made of material which is durable and resists the drying and cracking, provides a long service life..
  • Easy to install, perfectly match your car..
  • The air intake hose is mounted between air intake box and throttle body on your vehicle.When the air intake hose, which is the tube piece that connects the air filter box and the intake manifold, becomes old or possibly even cracks, it will not functional appropriately..
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 18HP: Compatible with 6.2L, V8, 2008-2013 Chevy Corvette, 63-3073

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 18HP and up to 20 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay.
Check Stock