Reviews Air Hose Quick Disconnect
Air Venturi Foster Female to 1/8-Inch BSPP Male Quick-Disconnect Adapter, 5,000 PSI
- QUICK-DISCONNECT ADAPTER: Add this foster female quick-disconnect adapter to your air-hose fittings to give your air guns more pressure and power! This adapter works with a variety of PCP air guns to keep you prepared for your shooting sessions..
- VERSATILE ADAPTER: This air-fitting adapter has a universal-fitting design that lets you connect your air gun to this quick-disconnect piece. It works with a 1/8-inch BSPP male adapter and has a maximum pressure of 5,000 psi..
- COMPACT PCP ADAPTER: Our adapter air fitting is compact enough that it won't get in your way when you need to refill your high-pressure air guns. Take this small adapter anywhere you go, and attach it to a variety of PCP guns whenever you need to!.
- EASY TO USE: To begin using your quick-disconnect adapter, simply hook up your adapter to your PCP guns. It includes an easy-to-install flow restrictor, and it fills your air guns slowly while reducing the heat build-up in the cylinder..
- AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check StockUniversal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring
- Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
- Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
- Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
- Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
- Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check Stock
TOPA SPORT Paintball Airsoft Fill Whip Hose Extension 4500psi PCP Air Fill Station & Charging System Stainless Steel High Pressure Air Tool Fittings with Universal Quick-Disconnect Plug Adapter (36\)
- 【4500 PSI】Works with compressed air tanks up to 3000psi-4500psi rated assembly. It is not designed to work with CO2 Tanks..
- 【BUILT TO LAST】This refill hose is made from high-quality stainless steel to guarantee durability. Suitable for most hand pumps, high quality replacement to stock air pump hoses..
- 【FAST & EASY】Refill your tank easily! The fill whip extends the line from your tank to the re-fill station so you can re-fill without having to remove the tank from your pack..
- 【EASY TO INSTALL】The hose extension comes with a 8mm quick-disconnect male connector on the one end, and 8mm quick-disconnect female connector on the other end. It could be attached and detached within seconds..
- 【WIDE RANGE of APPLICATION】The external hose length is 36 inches and can be applied to filling stations or compressed air such as paintball / PCP / hand pump and air compressor etc. up to 4500 PSI..
Check StockNone branded Paintball Coil Remote Hose Line w/Quick Disconnect & 3000psi Pressure Gauge
- Paintball PCP Coil Remote Hose Line w/Quick Disconnect.
- Heavy Duty Remote Hose/Line With Quick Disconnect that get bulky tank off your paintball gun with a coil remote!.
- Unlike braided stainless steel hoses, the coil will expand and contract to fit the position you're in.
- Rated for 3000 psi use, so you can be sure you won't have any blown ends, It will work with ANY screw-in CO2 or compressed air / N2 tank!.
- Now with more flexible coil-Reduced number of coils reduces catching on vests and packs-Field tested with great results..
Check Stock
Fuel Line Disconnect Tool Set, 22pcs Master Quick Disconnect Tool Kit for Automotive AC Fuel Line and Transmission Oil Cooler Line, Includes Scissor Type Remover, Compatible with GM Ford Chevy Models
- 22pcs Master Quick Disconnect Tool Kit for separating automotive ac hose and fuel lines, suitable for a wide variety of domestic and foreign automotive..
- The fuel line disconnect tool set is used for most fuel lines, air conditioning lines, radiator and heater hoses, simple push-on & pull-off action, popular sizes 3/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch and 7/8 inch ..
- The fuel line disconnect tool kit is made of aluminum alloy and plastic steel,and this 22pcs fuel air conditioning line disconnect set can stand up to years of use..
- The master quick disconnect tool kit for automotive ac fuel line,offset for hard-to-reach areas, fits 5/16 inch , 1/2 inch , 3/8 inch , 5/8 inch , 3/4 inch , 7/8 inch ,4 colored quick ac fuel line quick disconnector 3/8 inch , 1/2 inch , 5/8 inch & 3/4 inch ..
- Our transmission line disconnect tool for Ford comes with a heavy-duty blow-molded carrying case,helps to protect and store various parts conveniently.High quality products, 100 percent new.If there is any problem in the process of purchase or use, please contact us to solve i....
Check StockDOZYANT 15 Foot 3/4inch ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Generator, Construction Heaters and More NG/Propane Appliance
- 3/4" ID Natural Gas Hose Connector with a 3/4" Male QD Plug X 3/4" Male Pipe Swivel via Quick-connect Adapter.
- Used to connect Natural Gas or Propane appliance to a permanent gas supply via quick disconnect.
- Perfect for connecting your generator to natural and LP gas supply, also used for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
- The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). It shuts off the flow when pipe is removed.
- Quick disconnect hose assembly. Rubber hose and 100% solid brass fittings, well made and sturdy.
Check StockDixon DCP2144B Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, Plug, 1/4\ Coupling x 3/8\ Hose ID Barbed
- Air Chief industrial interchange quick connect coupler for connecting directly to a hose with barbed hose ID end for a greater hold on the hose.
- 1/4" Air Chief industrial interchange quick connect plug with a 3/8 "ID barbed hose end.
- Valveless construction allows flow when disconnected.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).
Check Stock
NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case
- NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
- Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
- Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock
10 Pieces Airbrush Adapter Set Includes Airbrush Adapter Kit Airbrush Quick Release Disconnect Fitting Connector Female Couplings Nylon Braided Airbrush Hose for Air Compressor and Airbrush Hose
- What you receive: there are 10 pieces in this airbrush adapter set, including 7 pieces 1/8 inch and 1/4 inch BSP male and female couplings in different types, 1 piece airbrush quick disconnect coupler, 1 piece 1/8 inch BSP male fitting and 1 piece 6 ft nylon braided airbrush hose for connecting to airbrush end, abundant content and sufficient quantity meet your airbrush hose use.
- Sturdy structure: our airbrush adapter kits are made of quality metal material, which endows these accessories with sturdy and strong structure, makes them not easy to break or deform, anti-corrosion and anti-rust, durable to provide you long term application.
- Simple to assemble: the quick release airbrush fittings are easy to connect and disconnect airbrush without screw trouble, with smooth threads which are convenient for you to assemble in several seconds, saving you much effort and time.
- Compatible with: the airbrush quick disconnect set is compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex airbrush and most China airbrush, able to satisfy your multiple replacing needs and practical to use.
Check StockPaintball Remote Coil Hose with Quick Disconnect and 3000psi Pressure Gauge, HPA High Pressure Co2 Adapter Hose
- Paintball PCP Coil Remote Hose Line with Quick Disconnect.
- Heavy Duty Remote Hose/Line With Quick Disconnect that get bulky tank off your paintball gun with a coil remote!.
- Unlike braided stainless steel hoses, the coil will expand and contract to fit the position you're in.
- Rated for 3000 psi use, so you can be sure you won't have any blown ends, It will work with ANY screw-in CO2 or compressed air / N2 tank!.
- Now with more flexible coil-Reduced number of coils reduces catching on vests and packs-Field tested with great results..
Check Stock
Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
- DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock15 Pieces Airbrush Adapter Set Airbrush Quick Release Coupling Disconnect Adapter Kit Airbrush Quick Release Disconnect Fitting Connector Set Female Connectors for Air Compressor and Airbrush Hose
- Details of package: there are 7 pieces different types of 1/8 inch and 1/4 inch male and female connectors, 2 pieces quick disconnect connectors....
- Metal material: these airbrush adapter kits are made of quality metal material, which feature sturdy construction and long lasting performance, they....
- Designed for: the adapter attachment is designed for spray gun, air hose and compressor, when you need to use it for multiple spray guns, there is no....
- Simply designed: our airbrush adapter kit is a simply designed spray gun connector for connecting the air hose to the spray gun, which is easy to use....
- Compatible with: these spray gun quick disconnect kits are compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex spray guns and most....
Check StockAir Venturi Air Gun Hand Pump (Hand Pump)
- Pumps to 4, 500 psi/310 bar (always use the correct pressure rating for your gun).
- Flexible 21" micro-bore hose (inside a spiral steel cage).
- Integrated moisture catch on output end of hose.
- Integral manometer - oil-filled air pressure gauge.
- Includes test plug, accessory pack with spanner wrench and 2 rebuild kits.
Check Stock
