Reviews Air Cooling Equipment

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Dual-core Thermoelectric Peltier Cooling System Semiconductor Refrigeration Cooler Kit with Power for Plate Cooling Pet Bed Cooling etc

  • 【Bingo Choice】: Our dual-core thermoelectric peltier cooling system is suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
  • 【Wonderful Characters】: This semiconductor refrigeration cooler kit with power has stable working status and low noise, it doesn’t need refrigerant.
  • 【Wide Range of Applications】: This thermoelectric cooler can used for plate cooling, pet bed cooling, test bench, small space cooling.
  • 【Note】: Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc.
  • 【Extra Usage】: This dual-core cooling system kit can be used as dual-core cooling, air cooling device, cooling equipment.
Check Stock

Portable Air Conditioner, Evaporative Mini Air Portable AC in 3 Speed, Personal Conditioner with LED Light Air Cooler for Office Dorm Room

  • ...air, which also has a slight humidification effect..
  • ❆【Portable Breeze Max Air Cooler】This mini air conditioner integrates air cooling, and spray humidification functions and is equipped with LED atmosphere light. The multi-directional air vent is adjustable to point the air to the area you want..
  • ❆【Upgrade Equipment And Tanks】This small air conditioner uses cotton equipments to better keep the cold air clean. The pull-out design facilitates quick removal and cleaning of the equipment. The topwater tank increases the convenience of water filling and reduces water leakage. The large-capacity water tank can continuously use the cooling function for 8 hours..
  • ❆【Energy Saving And Quiet】The whisper quiet fan can work effectively at low noise levels, and there are 3 wind speeds to choose from. The powerful power supply and conversion circuit can minimize losses, save you a lot of electricity bills, and freon free, protect the environment..
  • ❆【Cool Air Wherever You Need It】The ideal size of this USB mini air conditioner is 6.5 x 6.2 x 5.5 inches and weighs only 1.9 pounds. The small air conditioner can be used in combination with adapters, mobile power supplies, computers, car chargers, etc. Easy to enjoy cool and fresh wherever....
Check Stock

ECCPP Radiator Cooling Fan Kit Assembly Replacement fit for 2007-2009 Kia Sorento 3.3L 3.8L

  • FITMENT – This radiator cooling fan kit fits 2007-2009 Kia Sorento 3.3L 3.8L.
  • RADIATOR FUCTION – Innovative engineering,manufacturing technology and quality control ensure that ECCPP radiators meet or exceed the performance of the original equipment radiators they replace.
  • that extends to all components,including engine and transmission oil coolers.
  • COOLING FAN FUCTION – Engine cooling requires a constant supply of fresh air,The radiator cooling fan draws air past the fins of the radiator core to lower the coolant temperature that will circulate through the engine,and our cooling fans are powered electronically,It receives a signal from a coolant temperature sensor when the engine is running too hot, and it turns the cooling fan assembly on.
  • HIGH QUALITY – ECCPP’s assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
  • ATTENTION – Don’t forget to search for See all vehicles before purchasing the items and you can also look though the i....
Check Stock

AEDIKO 4pcs 5015 Cooling Blower Fan 3D Printer Fan DC 24V Dual Ball Bearing 50x50x15mm 0.17A Turbo Cool Fan

  • High Quality:5015 Fan is Made of Special and Premium Materials for the Fugetek FG-637, 647 and FG-857 Projectors,Which is High Temperature Resistant and Extremely Durable.
  • Easy to Install: Cooling Fan come with 2 Pin 30cm Wire Cable and the Cable with 2 Pin XH2.54 Power Connector ,Plug and Play ,Very Easy to Install.
  • Application: 5015 Blower Fan Widely Used in Humidifier, Aromatherapy and Other Small Appliances Series.
  • Small Heat Radiating Communication Equipment.
  • Intelligent Industrial Control Equipment Plate Cooling Heat, High Precision Medical Equipment Cooling.
  • Package Contents: 4pcs DC Blower Fan, If You Have Any Question for the Product, Please Feel Free to Contact US, We Will Do Our Best for You.
Check Stock

SoundOriginal Brushless DC Cooling Fan 24V 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (Black 24Vx1)

  • 1pcs Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Air Flow : 6.9 CFM.
  • Connector: 2 Terminal Connector with 2pin-ph2.54.
  • compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance..
  • DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.06A.
  • Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

Honeywell YTH5320R1000 Wireless Focuspro Thermostat Kit, Non-Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • Module receives communication from the wireless devices.
  • Maintains 62 F for heating and 82 F for cooling.
  • THERMOSTAT: Same great features of the FocusPRO thermostat - now wireless..
Check Stock

ESUMIC DC 12V DIY Thermoelectric Peltier Refrigeration Cooling System Kit Semiconductor Cooler Conduction Module + Radiator + Fan + TEC1-12706

  • 1. Material: Adopt TEC1-12706 semiconductor chilling plate, good quality for use..
  • 2. Structure: Complete sealed structure, isolating the moisture in the air..
  • 3. Application: Include TEC1-12706 semiconductor cooler and other accessories, easy to install. Compact size can be installed anywhere, easy installation. Suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning..
  • 4. Performance: High cooling efficiency, easily cooling down within a few minutes. Mini air conditioner for pet or little fridge..
  • 5. Effect: Great DIY kit for electronic enthusiasts in semiconductor cooling applications..
Check Stock

SoundOriginal 12V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (12v Dual Ball Bearing 2pack)

  • Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • pc cpu server cooling dissipation and so on—Repair Replacement (2Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5800 RPM, Air Flow : 3.6 CFM bearing made in Japan. Guaranteed to continuously run 40,000 hours under normal temperature..
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H).
  • Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″.
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable..
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans.
Check Stock

SoundOriginal 12VDC Brushless Blower Cooling Fan 50x50x15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (x1 12V)

  • DC 12V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • pc cpu server cooling dissipation and so on—Repair Replacement (1Pack).
  • Bearing: Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5500 RPM.
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H).
  • Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″.
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable..
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5500 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sleeve Bearing.
Check Stock

Electrostatic Washable Permanent A/C Furnace Air Filter (12X20X1)

  • Turn your HVAC system into a whole home air purification system by replacing your 16x25x1 disposable filter with the high efficiency electronic Wingman1..
  • Captures over 97% of airborne particles .25 micron and larger- including Pollen, Household Dust, Pet Dander and Cooking Smoke..
  • Take control of your home’s indoor air quality this year with the high efficiency Wingman1 and breathe clean air!.
  • Quick & Easy Installation: Homeowner Installed (NO Tools Necessary)- Simply replace your current 16x25x1 disposable filter with the high efficiency Wingman1 electronic filter and plug it in!.
  • Protect Your Equipment: Pleated filters can restrict air flow and damage your HVAC equipment. The Wingman1 allows increased airflow resulting in less equipment runtimes, maintenance and wear. Enjoy faster home cooling or heating, improved air quality and lower utility bills with the Wingman1 Electronic Air Filter..
Check Stock

SoundOriginal 24V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (2pcs 24V)

  • DC 24V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • pc cpu server cooling dissipation and so on—Repair Replacement (2Pack).
  • Bearing. Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM.
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H).
  • Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″.
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable..
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing.
Check Stock

Peltier Module Refrigerator Cooling System DIY Thermoelectric Cooler Refrigeration Air Cooling Device 4-Chip TEC1-12706 12V Peltier Cooler Semiconductor Water Chiller TEC

  • Applies for Small Area Cooling: This Peltier Module is suitable for small space cooling, semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
  • Working Principle: Air cooling device, not used to cool the water, use water to dissipate heat, and eventually the water is hot, not cold.
  • Easy to Operate: This kit is a finished product that does not need to be assembled, Simple operation, cooling quickly, outstanding performance.
  • Offers Stable Performance: Stable work and low noise, no vibration, no refrigerant required.
  • Working Range: Suitable for 20L space cooling, air temperature can be cooled to 5-8 degrees than normal.
Check Stock