Reviews Adjustable Round Dies

YiJiLi Diestock Holder Metal Round Die Stock Holder Thread Tap Wrench Handle Bar Tools Woodworking DIY(M18-M22), 45mm

  • 【Dimension】-Diameter: 45mm/1.77 inches.
  • 【Material】- Steel & Alloy Steel, with superior toughness, great wear resistant, rust-proof, durable for lasting a long service life.
  • Used to make new threads when the threads are seriously damaged.
  • 【Easy to Use】- This die handle is easy to use for occasional hole project. It fits the die perfectly and easy to use.
  • 【Features】- Round die holder is featured with 5 adjustable screws to fix the dies.
  • The die stock can securely hold round dies and is easy to operate.
  • 【Wide Usage】- This tap and die comes with a removable handle for work in tight spaces. Suitable for cleaning mild steel or aluminum, house decoration, construction, car repairing, factory work.
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

GEARWRENCH 42 Piece Ratcheting Tap & Die Set Metric - 3886

  • Die adapter works on round and hex shaped Dies.
  • Ratcheting T-handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Die adapters work with the 3/8 Drive pass-thru ratchet and socket system as well as socket Accessories".
  • Auto-locking feature allow the tap adapters to be removed safely.
Check Stock

GEARWRENCH 77 Piece SAE/Metric Ratcheting Tap and Die Set -3887

  • Gearwrench Die adapter works on round and hex shaped dies.
  • Gearwrench Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Die adapters work with the 3/8inch Drive pass-thru ratchet and socket system as well as socket accessories.
  • Auto-locking feature allow the tap adapters to be removed safely.
Check Stock

86-Piece Master Tap and Hex Die Set, Premium Titanium Coating | SAE Size #4 to 5/8”, Metric Size M3 to M16 | For All Coarse, Fine, Pipe Threads | Complete with Holders, Stocks, Gauges and Metal Case

  • ...designed for all kinds of internal and external threading, rethreading, or thread repairs jobs.
  • [PREMIUM MATERIAL AND COATING]: Industrial grade high speed steel (HSS) construction with unique titanium coating provides maximum strength and lasts 3 times longer than normal ground finished tap die for rust and corrosion prevention.
  • [EXCELLENT CUTTING PERFORMANCE]: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance on a wide range of materials such as wood, carbon steel, cast iron, aluminum, brass, copper, stainless steel.
  • [HEXAGONAL SHAPE DIES]: Hex dies can be used with wrenches and sockets for added leverage, so they work much better than round dies for greater torque applications and in tight spaces. Hexagon dies fit both needs to create new thread or chase old thread, while round dies are usually to create thread only.
  • [COMPLETE SIZE COVERAGE]: Set includes (42) SAE standard and (36) metric taps and dies from small to large: #4x40, #6x32, #8x32, #10x32, #10x24, #12x24, 1/4x28, 1/4x20, 5/16x....
Check Stock

3 Different Shapes of Cutting Dies Stencil Metal Template Molds(Rectangle,Circle & Hexagon),Urvoo 24 Pieces Embossing Tools for Card Making,Scrapbooking,Album Paper DIY Crafts

  • High-Quality Materials: our cutting dies are made of carbon steel, can be used for a long time, and can be reused and easy to clean.
  • Dimensions: Rectangular: 11.7cm x 8cm/4.6in x 3.1in, Round: Diameter 9.5cm/3.75in, Hexagon: 8.6cm/3.38in.
  • Wide Range of Applications: our cutting die set has 3 different shapes and can be used for template design, cut a single sheet of scrapbook, card, paper crafts, themed invitations, album decoration, photo frame etc..
  • Simple to Use: Place all metal templates on the card and cut into circles of different sizes to get layered, then you will get what you want.
  • Package Includes: 3 sets of cutting dies of different shapes, 1 x rectangular, 1 x round, 1 x hexagonal, there are 8 different shapes in a set of cutting dies.
Check Stock

BSP/BSPP British Standard Pipe Tap and Die Set - 18 Piece

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 18 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ...ad (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

KAKA Industrial Metal Bender, Sturdy and Versatile Compact Metal (YP-9)

  • LIGHT WEIGHT AND PORTABLE BENDER. This bender is light weight and portable.
  • at the same time, it is sturdy. It can be mounted on work trucks, tractors, or any concrete floor.
  • SEVEN DIES ARE INCLUDED. There are 7 dies inside this bender that can be utilized for customizing brackets and supporting other parts on the working field.
  • GREAT CAPACITY. The telescoping handle bends round or square bar stock up to 5/8" thick with a maximum width up to 1-15/16".
  • LONG HANDLE ALLOWS BETTER LEVERAGE. The 44-Inch telescoping handle guarantees the better leverage. Pre-drilled holes are designed for easy mounting to bench or table.
  • COMPACT DESIGN ALLOWS VERSATILITY. This compact metal bender is capable of making different bends on flat, square as well as solid round stock.
Check Stock

Hanson 12436 Die Stock 1-7/16\ Hex Adj, for Tap Die Extraction

  • Hexagon metric dies are ideal for automotive repair and machinery where metric threads are specified.
  • These dies are designed to ensure that bolts fit tightly and anchor securely.
  • High-carbon steel hexagon dies are great for cutting right-hand external threads.
  • Hex-head shape is designed for use in die stock and adjustable wrenches.
Check Stock

Power Punch Deep Thorat kit Sheet Metal Rivet Hole Portable Hand Auto Body Tool

  • Kit includes: 1 punch, keys & one each of these round punch & dies..
  • 6 punch: 1/8" 3/16", 1/4", 5/16", 3/8 7/16"..
  • 6 dies: 1/8" 3/16", 1/4", 5/16", 3/8 7/16"..
  • Throat Depth: 3.25" (3" to front of gauge)..
Check Stock

3rd Generation Hydraulic Tubing Bender for Round Tubing, Hydraulic Pipe Bender for Roll Cage Tubing, 1.50 Inch Round Dimple Die

  • Bends round tubing up to 90 degrees which works perfect for roll cages, frame crossmembers, and chassis components.
  • Incremental marks cast into dies makes it easy to reproduce bends.
  • For use with up to .110" wall thickness mild steel or .096" wall thickness chromoly round tubing.
  • Comes with one aluminum die in the size of your choice 1", 1-1/4", 1-1/2", 1-5/8" or 1-3/4".
  • 7" bend radius dies are also sold individually if you need to bend a different size tubing later.
Check Stock