Reviews Adjustable Plunge Router Bit

DEWALT Router, Fixed/Plunge Base Combo Kit, 11-Amp, 1-3/4 HP, (DW616PK)

  • 1-3/4 HP (maximum motor HP), 11.0 amp motor of DEWALT router provides the power to rout smoothly through the toughest hardwoods.
  • Micro-fine depth adjustment ring of DEWALT plunge router provides precise depth adjustments in 1/64-inch increments and adjusts vertically for a constant switch/cordset location.
  • Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.
  • Quick release motor latches for fast and easy motor pack removal for bit and base changes.
  • Integral, through-the-column dust collection collects 95% of the dust and provides superior bit visibility.
  • Detachable cordset offers cordset serviceability and removes the need for a -inchshorty-inch cord motor pack.
  • Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy.
  • Precision machined brass bushings and case-hardened steel guide rods provide a smooth and accurate plunge stroke.
  • Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings.
  • Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control.
Check Stock

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

DEWALT Router, Plunge Base, 10-Amp, 2 HP (DW621)

  • DEWALT router features full-wave electronic variable speed motor with soft start runs at 8,000-24,000 rpm with constant speed under load to ensure a quality finish in all materials.
  • Rack and pinion depth adjuster with micro-fine adjusting allows quick, accurate set-up for DEWALT plunge router.
  • Integral dust collection system efficiently removes chips and provides superior bit visibility.
  • Spindle lock button allows for single-wrench bit changes.
  • Innovative rubber-coated knobs have plunge-lock and on/off built-in for maximum user control.
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

3/8 x 3/8 2FL HIGH SPEED STEEL, BALL NOSE, DOUBLE END MILL

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 5.2Deg, H-Si coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SKIL 14 Amp Plunge and Fixed Base Router Combo — RT1322-00

  • 14 AMP PLUNGE ROUTER – Powerful 14 Amp, 2.5 HP motor includes both fixed and plunge bases for a variety of work..
  • SPEED CONTROL LCD DISPLAY – Lets you select the bit type and material for suggested speed settings based on the task at hand..
  • ELECTRONIC FEEDBACK – Ensures motor maintains RPM while the material is being routed..
  • SOFT START – Provides a safe and controlled start to routing..
  • LIVE TOOL INDICATOR – Stay safe and alert with an indicator that lights up when plunge router is connected to power..
Check Stock

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Hammerhead 10-Amp Variable Speed Plunge Woodworking Router Kit with Parallel Guide and Vacuum Adaptor – HAPR100

  • Variable Speed - Control dial to provide variable speeds for different applications.
  • Fast Micro-fine Bit-depth Adjustment - Simple and accurate at any plunge setting.
  • Adjustable Turret Stop – Control bit-depth range by adjusting turret stop.
  • Integrated Spindle Lock, Wrench on Board - For fast router bit changes.
  • Vacuum Adaptor - Connect to vacuum or shop vac to keep a clean workspace.
Check Stock

BOSCH RA1152 Offset Wrenches for Router Bit-Changing

  • Offset wrench design allows easy router bit changes on routers that are installed in router tables.
  • Drop-forged design with rounded edges provides comfort during bit changes.
  • Sized to work with Bosch routers: including 1617, 1617EVS, MRF23EVS routers and 1617EVSPK and MRC23EVSK router kits.
  • The 24 mm wrench can also be used with Bosch 1619EVS, 1613, 1613EVS and 1613AEVS Plunge Routers.
  • Includes 16 mm shaft wrench and 24 mm collet wrench.
Check Stock

SpeTool Tapered Ball Nose Spiral Router Bit 1.0mm Tip Diameter (0.5mm Radius) 4.82 Deg for CNC Milling Engraver Carving Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 4.82Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Carbide Ball Nose Router Bit 2.0mm Diamter Tip (1.0mm Radius) Woodwork Metal CNC Engrave Carving Machine Tools 1/4 Shank TiAlN Coat

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock