Reviews Adjustable Mounting Arm

Amazon Basics Notebook Laptop Stand Arm Mount Tray

  • Arm mount tray accessory for a notebook computer.
  • ideal for creating an ergonomic workstation.
  • Includes a notebook tray and all necessary hardware and instructions.
  • Open-sided mounting plate with adjustable length knobs accommodates almost any size notebook up to 12lbs.
  • Attaches to a standard VESA 75mm mounting bracket.
  • Compatible with all Amazon Basics display arms (sold separately), including Single Monitor Wall Mount Arm, Single Monitor Mounting Arm, and Dual....
Check Stock

LUCKY Fish Finder Transducer Mount Arm Kayak Bracket Transducer Mounting Arm Flexible for Boat Canoe Kayak Fishing

  • ...ent kayaks as you like. Meanwhile, you could also fix the transducer mount arm by three screws if there are screw holes in your kayak. You could also use double sided stickers to fix the transducer mount arm which you can find two pieces in the retail box..
  • ◆ Solid & Adjustable Mounting Base : The base of the transducer mounting arm is made of high strength composite material which is solid and durable. The base connector is a tripod mount adapter. So the bottom of the transducer mounting arm can be rotated 180°. When the arm is disassembled from the base, the base can be connected to any other device which is compatible with a tripod mount adapter..
  • ◆ Wild Compatibility & Application : The transducer mount arm is wildly compatible with different branded wired transducers. For example, you could choose it for the wired transducers of LUCKY, LUCKYLAKER and so many other brands. Moreover, it could also fix a wireless sonar ball by its 1/5 inch male screw head that is on the other end of the arm if there is a 1/5 inch female screw hole in the sonar ball..
Check Stock

WALI VESA Mounting Plate for WALI Monitor Mounting System, VESA Compatible 75 by 75 mm and 100 by 100 mm (VES01), Black

  • Compatible: with most WALI desk monitor mount and stand with 1.375” (3.5cm) diameter center pole. Fit one monitor up to 27”, 22 lbs and VESA size 75x75mm and 100x100mm..
  • List: M001, M001S, M002, M003, M004, MF001, MF002, MF003, M001XL, M002XL, M001LP, and M00LP..
  • Design: The high-grade 2.5” mounting arm with fully adjustable, allow +/- 45° tilt, +/- 90° swivel to change reading angles and 360° rotate from landscape to portrait mode..
  • Dynamic: Monitor arm is easily adjustable, allowing to work in a more comfortable and ergonomically correct position to reduce neck and eyestrain..
  • Package Includes: WALI 2.5” Single Fully Adjustable Arm x 1, VESA Mounting Plate x 1, Mounting Hardware Kit x 1, experienced and friendly US based customer support available to assist 7 days a week..
Check Stock

Levemolo 1 Set Racing Gaming Chair Gaming Chair Adjustable Armrest 180 Degree Seat Angle Adjustment Racing Chair Angel Adjuster Regulator Accessories Racing Chair Angel Adjuster Makeup

  • Racing Seat Angle Adjuster: Multi-Angle Adjuster Adjustable Mounting Practical Replacement for Office Chair Gaming Seat：The rear angle adjuster is made of material, which is durable and practical..
  • Seat Back Angle Adjuster: Multi-Angle Adjuster Adjustable Mounting Practical Replacement for Office Chair Gaming Seat：Lightweight, reliable, and product. Improves mobility and stability..
  • Seat Angle Adjustment: COMPUTER CHAIR ANGLE ADJUSTER New adjustable front control arm make operation more convenient..
  • Racing Seat Angle Adjuster: GAMING CHAIR REPLACEMENT PARTS Seat Back Angle Adjuster Swivel Chair Accessories 180 Degree Adjustable for Racing chair.
  • Seat Angle Adjustment: Multi-Angle Adjuster Adjustable Mounting Practical Replacement for Office Chair Gaming Seat：Adjustable handle front control arm makes operation more convenient..
Check Stock

Neewer USB Microphone Kit for Windows and Mac, Includes Suspension Scissor Arm Stand, Shock Mount, Pop Filter, USB Cable and Table Mounting Clamp for Broadcasting and Sound Recording (Blue & Silver)

  • KIT INCLUDES: (1)NW-7000 USB Condenser Microphone(Blue and Silver), (1)Adjustable Suspension Scissor Arm Stand and Mounting Clamp, (1)Pop Filter, (1)Black Shock Mount, (1)USB Cable(Blue), (1)Ball-type Anti-wind Foam Cap.
  • NW-7000 USB CONDENSER MIC: Utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source.
  • Plug-and-Play, no need to install any driver.
  • Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations.
  • NW-35 ADJUSTABLE ARM STAND: The adjustable scissor arm stand with mounting clamp is made of all metal construction, sturdy and durable.
  • The adjustable arms can be fold up and easy for you to carry around.
  • The mounting clamp can attach to tables, desks, shelves, counters, etc.
  • Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc..
  • METAL SHOCK MOUNT: Features an adjustment with locking knob and can effectively reduce handling noises.
  • The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.
  • WIDE COMPATIBILITY: Can be used with Mac without installing driver and Windows 2000/XP/7/8/10/Vista system.
  • Strong output, no distortion, low power consumption.
Check Stock

SUNMON Microphone Wall Mount and Metal Table Mounting Clamp, Universal Microphone Boom Arm Stand Compatible with HyperX QuadCast, Blue Yeti, Blue Snowball, Shure SM58 Microphone

  • Widely Compatible: The adjustable arm comes with a standard 3/8" to 5/8" adapter for different shock mounts and microphones. (Note: The microphone and shock mount are not included.).
  • Double Microphone Mount: The boom arm stand contains two different mic mount, wall mount and table mounting clamp. Satisfy the use of multiple scenarios..
  • Mic arm stand: The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • Upgraded Clamp: The table mounting clamp cab easily clip to 2.36''/60mm thick deskwith 0.47in/12mm hole for mic arm. The microphone wall mount set can Install on the wall, solve the limitation that your desk cannot be installed. (Drill Bit Hole diameter: 15/64" /5.95 mm）.
  • Package Included: 1x Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Microphone wall mount set, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount), 1x Mic clip. Note: NOT INCLUDED MICROPHONE AND SHOCK MOUNT..
Check Stock

InnoGear Microphone Stand, Desk Mic Stand Adjustable Boom Arm Stand with 3/8' to 5/8' Screw Adapter Mic Clip for Blue Yeti, Yeti Nano, Snowball and other Mic

  • Height & Angle Adjustable: By rotating the height clutch, the height of stand is adjustable from 10.8 inches to 14 inches. The boom arm swivels and has a good range of motion. The included mic clip can be rotated by 180°. Easy to use and set up the height and angle you want..
  • Lengthened Boom Arm: The telescoping boom arm is upgraded to two-section, compared to single-section arm of others on the market. The length of boom arm is adjustable from 16 inches to 28 inches. Sturdy, silent and great reach. Noted: When it goes to the max length, recommended to have the second pole remained 1 inch inside the boom arm..
  • Enhanced Load-bearing: One 1.1lbs solid counterweight is fixed to one end of the boom arm, improving the load-bearing capacity. When the arm is at the min length of 16 inches, it reaches the max load of 6.6lb/3.0kg and when the arm is at the max length of 28 inches, it reaches the min load of 3.3lb/1.5kg. Strong enough to hold your microphone steadily while in use..
  • Upgraded Table Mounting Clamp: With the mounting position of the stand in the center, the upgraded desk clamp could stably clip to any desktop up to 2.2 inches thick. The diameter of metal gasket is increased to 38mm to enlarge contact surface and further enhance stability. A rubber p....
Check Stock

HUANUO Bundle - Triple Monitor Stand and Dual Monitor Stand with Heavy Duty Base

  • Triple Monitor Stand Fits 3 13" To 24" Screens Monitor- This triple monitor stand fitting 3 computer monitors 13" to 24" in size and 22 lbs in weight with VESA 75x75mm and 100x100mm mounting holes.
  • Triple Monitor Arm with Articulation & Height Adjustment - Full Adjustable arm of this 3 monitor stand offers 180°tilt（the middle screen can only support ±15°tilt due to the back rests on the center pole）, ±90°swivel, 360° rotation, and a 16.7” height adjustment along the center pole. Monitors can be placed in portrait or landscape orientation.
  • Dual monitor Stand Fits 13 to 32 inch Flat /Curved Monitors - With strength heavy-duty base widely fit two 13" to 32" LCD computer monitors and 17.6 lbs per arm in weight with Vesa 75x75 and 100x100mm.
  • Dual Monitor Arm with Fully Adjustable Articulation Mount - The arm offer +/- 90° swiveled, +/-90° tilt and the monitor plate supports 360° rotation. And height adjustment along the center pole to freely set your monitors to customized angle and position while saving up much valuable space on your desktop.
  • Stable Sturdy Freestanding Stand - Comes with dual Options, a biger size and heavy duty base,In addition, eqquied with the grommet mounting kit to strengthen the stability ( thickness up to 2.8"....
Check Stock

Neewer NW-800 Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand

  • This Kit Includes:(1)Condenser Microphone + (1)Adjustable Suspension Scissor Arm Stand + (1)Table Mounting Clamp + (1)Metal Shock Mount + (1)Ball-type Anti-wind Foam Cap + (1)3.5mm Male to XLR Female Cable. *PLEASE NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.*.
  • The professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source..
  • The adjustable scissor arm stand is made out of all steel construction, sturdy and durable. Folding type, convenient to carry. Can be mounted on the announcers' table. The double-braced arms add strength. *Max load: Approx 35oz / 1KG*.
  • The table mounting clamp,a specially designed table mounting clamp for universal microphone suspension boom scissor arm stand..
  • The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers'spit..
Check Stock

Generic Sewing Portable Light

  • Sewing Light Generic Sewing Portable Light Off White In Color Adjustable Arm Bendable, completely adjustable in every direction, On/Off Switch, Heavy Duty Shade, Porcelain Socket, All Steel Construction Comes with mounting clamp Does not come with bulb Gives great illumination to your work area DSB60C.
Check Stock

Neewer USB Microphone with Suspension Scissor Arm Stand, Shock Mount, Monitor Headphone, Pop Filter, USB Cable and Table Mounting Clamp Kit for Sound Recording for Windows and Mac (Blue/Silver)

  • KIT INCLUDES: (1) NW-7000 USB Condenser Microphone(Blue and Silver), (1) Adjustable Suspension Scissor Arm Stand and Mounting Clamp, (1) Monitor Headphone.
  • (1) Pop Filter, (1) Black Shock Mount, (1) USB Cable(Blue), (1) Ball-type Anti-wind Foam Cap.
  • MIC AND MONITOR HEADPHONE: The microphone utilizes cardioid pickup pattern with condenser capsule, minimizing background noise and isolating the main sound source.
  • Plug-and-Play, no need to install any driver.
  • The monitor headphone's circumaural design contours ensureexcellent sound isolation in loud environments.
  • 180 degree rotatable earcups are easy for single ear monitoring.
  • NW-35 ADJUSTABLE ARM STAND: The adjustable scissor arm stand with mounting clamp is made of all metal construction, sturdy and durable.
  • The adjustable arms can be fold up and easy for you to carry around.
  • The mounting clamp can attach to tables, desks, shelves, counters, etc.
  • Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc.
  • METAL SHOCK MOUNT: Features an adjustment with locking knob and can effectively reduce handling noises.
  • The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.
  • WIDE COMPATIBILITY: Can be used with Mac without installing driver and Win....
Check Stock

Conrad (Savage Kings MC - South Carolina Book Series 4)

  • The GPS long arm suction cup mount with 17mm ball, telescoping arm is adjustable from 4.53 to 6.89 inches and swivels 270 degrees..
  • This GPS car mount features an extra strong suction cup with super sticky gel to stably mount your Garmin GPS in the best visual position..
  • Package includes: One suction cup mount( main body made of high quality ABS ), wipes( for cleaning mounting surfaces ), installation manual..
  • Suitable for Garmin GPS devices with 17mm swivel ball mounting pattern..
  • Also works for GoPro Action Camera & car phone holder with 17mm swivel ball mounting base..
Check Stock

Mount-It! Projector Ceiling Mount for Epson, Optoma, Benq, ViewSonic LCD/DLP Projectors with Adjustability, Compact Universal Bracket Design, 44lb Load Capacity, Silver

  • UNIVERSAL PROJECTOR CEILIING MOUNT with four fully adjustable arms. Fits most projector brands from BenQ, ViewSonic, Epson, Optoma, Asus and Acer. The arms are also removable for projectors that require 3 mounting points. Each projector connection arm is adjustable between 8.86" to 12.44 inches in total diameter for compatibility with different brand projectors..
  • ADJUSTABLE: 15 degree tilt function allows this projector mounting bracket to be suitable for some vaulted ceilings. 8 degrees of roll adjustment..
  • LOW-PROFILE DESIGN: Low-profile projector mount measures 5.1" in height. Ceiling mounting plate measures approximately 4" x 4". If you are looking for a longer extension arm, please search for sister product MI-604..
  • US-BASED CUSTOMER SERVICE: Standard size hardware and comprehensive installation manual included. Contact our friendly support team for questions and assistance..
Check Stock