Reviews Adjustable Guide Die Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Punch Locator Dowel Jig Kit 1/4 3/8 5/16inch Drill Guide Sleeve Tool for Woodworking Joinery

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center.....
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center....
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of....
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4”....
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in....
Check Stock

uxcell C Hook Spanner Wrench Collet Chuck for 55-62mm Round Nut, with Red Non-slip Handle

  • ✿Die Handle Wrench: This die holder wrench can be used to make and repair threads, clamping range: M22-M26 / 22mm-55mm..
  • ✿High-Quality Material: Die stock handle wrench is made of high-quality tool steel, sturdy and durable, the surface is polished and chrome-plated, rust-resistant and corrosion-resistant..
  • ✿Wide Range of Application: Die wrench handle can be used for surface treatment of low-carbon steel or aluminum materials, widely used in construction, car repair, DIY home decoration projects, factories, etc..
  • ✿Package Contains: 1 x round die stock handle wrench, total length: 19.5 inch / 495mm, fixed by 5 adjustable screws..
  • ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check Stock

GEARWRENCH Angled Tip Pry Bar, 31\ - 82431

  • Product 1: Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Product 1: Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Product 1: Die adapters work on round and hex shaped Dies.
  • Product 1: Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket Accessories.
  • Product 2: Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access.
  • Product 2: Head rotates 180° through 14 locking positions for unparalleled access and leverage.
  • Product 2: Compact design allows for work in tight spaces.
  • Product 2: Designed for demolition, repositioning equipment, industrial work, aligning steel components, or moving engines.
Check Stock

Hanson 1765542 1/4-20 - 1/2-13 Pts SAE Set for Tap Die Extraction 12 Piece

  • Tap and die set includes: Fractional: 1/4" - 20 NC, 5/16" - 18 NC, 3/8" - 16 NC and 1/2" - 13 NC.
  • Also includes 1" die stock, die spacer, small and medium adjustable tap sockets and a T-bar.
  • Handles allow more comfort and control when threading.
  • The ergonomic handles on the drive tools allow more comfort and control when threading.
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

YiJiLi Diestock Holder Metal Round Die Stock Holder Thread Tap Wrench Handle Bar Tools Woodworking DIY(M18-M22), 45mm

  • 【Dimension】-Diameter: 45mm/1.77 inches.
  • 【Material】- Steel & Alloy Steel, with superior toughness, great wear resistant, rust-proof, durable for lasting a long service life.
  • Used to make new threads when the threads are seriously damaged.
  • 【Easy to Use】- This die handle is easy to use for occasional hole project. It fits the die perfectly and easy to use.
  • 【Features】- Round die holder is featured with 5 adjustable screws to fix the dies.
  • The die stock can securely hold round dies and is easy to operate.
  • 【Wide Usage】- This tap and die comes with a removable handle for work in tight spaces. Suitable for cleaning mild steel or aluminum, house decoration, construction, car repairing, factory work.
Check Stock

JESSEM Clear-Cut Precision Stock Guides, JessEm# 04215

  • Unique roller system holds down workpiece and pushes into fence for precision stock feed.
  • 1-1/2" urethane one-way rollers set at 5 toward fence and 2-3/4" total adjustment.
  • Includes one infeed stock guide, one outfeed stock guide and detailed instructions.
Check Stock

Flattening Workbenches and Wide Boards with a Router

  • ...or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • Many sleds rely on the miter slot for reference. Our coping sled uses the fence as a reference instead. The Rail Guide Coping Sled Pro features a clear acrylic fence for reference which is offset and raised 2” above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence.
  • This robust, full featured coping sled has a laminated ½” thick MDF base that slides across your router table surface effortlessly. The sled also features a large, heavy duty hold down toggle with a 1-5/8” hold down foot to keep your stock in place. The unit al....
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ...ller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock..
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through..
Check Stock

Hedday Multi-Angle Drill Guide Attachment Portable Power Drill Stand Compatible with most 1/4” 3/8 Silver Drill Accessories Multi-Angle Readouts

  • Fits all 1/4-inch or 3/8-inch drills, perfect for horizontal, straight or angled drilling, drilling on the edge of a board or on round stock.
  • Guide-bars themselves have springs for a quick return when doing repetitive drilling.
  • Depth Stop & Large Handle : Adjustable depth stop and spring action control of the head. Drill adapter itself slides up and down on guide-bars,....
  • Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place, to accommodate drilling any round stock up to 3 inches....
  • Satisfaction guaranteed: 90 Days money back guarantee, so there is no risk for you to try, we value our every customer and we always try our best to....
Check Stock

DEWALT Plunge Base for Compact Router (DNP612)

  • Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.
  • Precision machined brass bushings and case-hardened steel guide rods provide a smooth and accurate plunge stroke.
  • Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings.
  • Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control.
  • Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight.
Check Stock

Anna Griffin AG-523H Fancy Flip Card Kit Die Single

  • 20 cards 20 die cut shapes 10 card stock sheets 48 interior sentiment stickers 24 Exterior sentiment stickers 24 Exterior sentiment die cuts.
  • Also includes 72 flower die cuts 48 foil stamped corners 30 foil die cuts 1 mat 1 set of dies 150 foam adhesives 30 envelopes perfect for any crafter.
Check Stock