Reviews Adjustable Groove Milling Bars

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

Blossoms & Steel (Seaside Pointe Book 1)

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

Face Mill Cutter Holder EMRW 6R 63-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner, Used for Fough Machining of The Workpiece on The Milling Machine.

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

2.5 Inch Face Milling Cutter Holder EMR 5R 63MM CNC end Milling Cutter + R8-FMB22 Shank Face Shell Mill Arbor + 4pcs RPMW1003 Carbide Inserts + 8mm Hexagon Wrench + T15 Wrench CNC Machine Tools

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

Face Mill Cutter Holder EMRW 6R 50-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner Used for Fough Machining of The Workpiece on The Milling Machine EMRW 6R50-22 1.96 Inch

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ...y, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the bar increases the anti-vibration capability of the boring bar..
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

Mann Lake FR812 100-Pack Unassembled Grooved Top and Bottom Endbars without Holes, 6-1/4-Inch

  • Unassembled groove top and groove bottom frames with no holes.
  • Standard outside dimensions, works with all uncapppers.
  • Includes 200 end bars, 100 top bars, and 100 bottom bars per pack.
  • With this 6-1/4-inch frames, use 6-5/8-inch supers and 5-5/8-inch foundation.
  • Measures 19-inch length by 1-3/8-inch width by 6-1/4-inch height.
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Profession 2Pc 1/2\ Shank 90 Degree Edge Banding Router Bit Set V-Design Tongue & Router Plate

  • Create tongue and groove joints for wood flooring. This set will cut perfectly fitting (v-groove) tongue & groove joints ideal for flooring and wainscot paneling..
  • Carbide cutters,featured with double flutes, straight shank, Solid hardened steel bodies with Anti-Kickback Design, Use on CNC and other automatic table-mounted portable routers. perfect for woodworking, edging, trimming, grooving, veining wood projects..
  • Suitable For: MDF, solid wood, MDF, particle board, plywood, wooden door frames, wooden window frames, cabinets and boxes, etc.However, please avoid to cut ferrous metal and non wood materials, such as steel, iron and sand..
  • Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. Strong and durable. Constructed using high quality materials, this durable router bit set will allow you to complete all your projects with confidence..
  • The Profession Cutter Milling's factory, located in the town of Fengguang in the "China Bit Production Base.
Check Stock

JIANXING 4mm 5mm 6mm Carbide Square End Mill Set,4 Flute Cutting Tools,HRC 55 Deg,Tialn Coating，Straight Shank Square Nose End Mills Cutter,CNC Router Bits,Widely Used in Alloy Steels/Hardened Steels(1 Set)

  • 【Cnc 4-Flute End Mill 】Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance.
  • 【Material】: Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance.
  • 【The 35 degree helix angle design】 Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal.
  • 【Applicable materials】 Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods..
  • 【Package Included】: 1set (4mm+5mm+6mm) Carbide End Mill.
Check Stock