Reviews Adjustable Die Stock

uxcell C Hook Spanner Wrench Collet Chuck for 55-62mm Round Nut, with Red Non-slip Handle

  • ✿Die Handle Wrench: This die holder wrench can be used to make and repair threads, clamping range: M22-M26 / 22mm-55mm..
  • ✿High-Quality Material: Die stock handle wrench is made of high-quality tool steel, sturdy and durable, the surface is polished and chrome-plated, rust-resistant and corrosion-resistant..
  • ✿Wide Range of Application: Die wrench handle can be used for surface treatment of low-carbon steel or aluminum materials, widely used in construction, car repair, DIY home decoration projects, factories, etc..
  • ✿Package Contains: 1 x round die stock handle wrench, total length: 19.5 inch / 495mm, fixed by 5 adjustable screws..
  • ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check Stock

Hanson 1765542 1/4-20 - 1/2-13 Pts SAE Set for Tap Die Extraction 12 Piece

  • Tap and die set includes: Fractional: 1/4" - 20 NC, 5/16" - 18 NC, 3/8" - 16 NC and 1/2" - 13 NC.
  • Also includes 1" die stock, die spacer, small and medium adjustable tap sockets and a T-bar.
  • Handles allow more comfort and control when threading.
  • The ergonomic handles on the drive tools allow more comfort and control when threading.
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

YiJiLi Diestock Holder Metal Round Die Stock Holder Thread Tap Wrench Handle Bar Tools Woodworking DIY(M18-M22), 45mm

  • 【Dimension】-Diameter: 45mm/1.77 inches.
  • 【Material】- Steel & Alloy Steel, with superior toughness, great wear resistant, rust-proof, durable for lasting a long service life.
  • Used to make new threads when the threads are seriously damaged.
  • 【Easy to Use】- This die handle is easy to use for occasional hole project. It fits the die perfectly and easy to use.
  • 【Features】- Round die holder is featured with 5 adjustable screws to fix the dies.
  • The die stock can securely hold round dies and is easy to operate.
  • 【Wide Usage】- This tap and die comes with a removable handle for work in tight spaces. Suitable for cleaning mild steel or aluminum, house decoration, construction, car repairing, factory work.
Check Stock

Anna Griffin AG-523H Fancy Flip Card Kit Die Single

  • 20 cards 20 die cut shapes 10 card stock sheets 48 interior sentiment stickers 24 Exterior sentiment stickers 24 Exterior sentiment die cuts.
  • Also includes 72 flower die cuts 48 foil stamped corners 30 foil die cuts 1 mat 1 set of dies 150 foam adhesives 30 envelopes perfect for any crafter.
Check Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock

Danelectro '59 Modified New Old Stock Electric Guitar Black

  • Shorthorn shape Scale length: 253 Number of frets: 21 Fully adjustable wraparound bridge 2 NOS (15 year old) lipstick pickups 2 stacked tone & volume controls 3 way pickup selector Case sold separately.
  • The '59 Modified New Old Stock Electric Guitar is Danelectro' flagship guitar, played by top artists around the globe, and is now available with NOS Lipstick pickups that were made in 1999! These unique pickups offer delicious highs and mids and you find them on any other guitar.
  • Danelectro's pickup supplier "misplaced" a load of lipstick pickups in their warehouse only to discover them recently, 15 years after they were manufactured.
  • These "New Old Stock" wonders have more twang than any Lipstick ever.
  • So Danelectro took their flagship 59M model, with the tuneable die cast bridge, and installed these 15 year-old wonders.
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Punch Locator Dowel Jig Kit 1/4 3/8 5/16inch Drill Guide Sleeve Tool for Woodworking Joinery

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center.....
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center....
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of....
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4”....
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in....
Check Stock

Stanley Hardware S807-487 V8024 Hinge Pin Door Stop in White

  • Authorized Replacement from National Hardware Stock #N279-711.
  • Mounts on a door hinge to prevent damage to wall.
  • Zinc die-cast body, steel adjusting screw, rubber and plastic tips.
  • Easily adjustable by turning adjusting screw.
Check Stock

Sizzix Adhesive Sheets, 6 by 6-Inch, 10/Pack

  • With the easy peel strip, these Adhesive Sheets are quick and easy to use. You can use them to transform your die cuts into stickers. Simply peel off the backing, adhere to your card stock, place your die on the card and roll through your die-cutting machine. Peel off the other backing from your die-cut and adhere to your make. Alternatively, you could make the sticker and use the sticky side to adhere glitter or gold leaf to decorate your die-cut..
  • This package contains ten 6×6 inch adhesive sheets.
Check Stock

Hanson 12436 Die Stock 1-7/16\ Hex Adj, for Tap Die Extraction

  • Hexagon metric dies are ideal for automotive repair and machinery where metric threads are specified.
  • These dies are designed to ensure that bolts fit tightly and anchor securely.
  • High-carbon steel hexagon dies are great for cutting right-hand external threads.
  • Hex-head shape is designed for use in die stock and adjustable wrenches.
Check Stock

Hunkydory Crafts The First Signs of Spring Little Duckling Designer Deco-Large Card Kit FSSPRING907

  • This is a kit features Quality Hunkydory Craftsmanship.
  • 1 Sheet of Die Cut and Foiled Images printed on 300gsm Card Stock.
  • 1 Sheet of Foiled and Die Cut Base Images printed on 350gsm cardstock.
  • 1 Sheet of Coordinating Printed Adorabel Scorable Cardstock Printed on 350gsm Card Stock.
  • This kit is designed to make one card. However, if you distribute layering pieces among the images, you can get more cards..
Check Stock

45-Piece Premium Large Size Tap and Die Set - SAE 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1”, Both Coarse and Fine Teeth | Essential Threading and Rethreading Tool with Handle Wrench and Case

  • ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ COMPLETE SIZES FROM SMALL TO LARGE - Set includes (20) SAE Fractional taps and dies for coarse thread (UNC): 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC, 9/16-12 NC, 5/8-11 NC, 3/4-10 NC, 7/8-9 NC, 1-8 NC.
  • (20) SAE Fractional taps and dies for fine thread (UNF): 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF, 9/16-18 NF, 5/8-18 NF, 3/4-16 NF, 7/8-14 NF, 1-14 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Large Tap Handle.
Check Stock