Reviews Adjustable Counter Bore Depth

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • ...wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Hex drill bit set tool made with tapered countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill bit set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit for wood countersink set, drill bits Secured with Pin. FTG 2337P Maximum Torque countersink drill bits with countersinks for wood.
  • STORAGE CONTAINERS are available on this page at section "Make it a bundle". Counter sinker drill bit set designed in Bloomfield, New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA spec....
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • ...wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Hex drill bit set tool made with tapered countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill bit set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit for wood countersink set, drill bits Secured with Pin. FTG 2337P Maximum Torque countersink drill bits with countersinks for wood.
  • STORAGE CONTAINERS are available on this page at section "Make it a bundle". Counter sinker drill bit set designed in Bloomfield, New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA spec....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

Irwin Marples Forstner Bit Set, 14-Piece with SPEEDBOR Countersink Wood Drill Bit, 4-Piece (1966893 & 1882793)

  • Easily drills high-quality flat-bottomed and pocket holes.
  • Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently.
  • Significantly reduces cutting time compared with traditional forstner bits.
  • Tapered drill with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws.
  • Adjustable four-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking.
  • Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
Check Stock

6434 Sleeve Height & Counter Bore Gauge for All Diesel Engines Range 0-1.00 Graduation 0.001 Reading 0-100

  • 【Wide Applications】 6434 1 in. Dial Indicator Sleeve Height and Counter Bore Gauge is compatible with all diesel engines with sleeved cylinders. Helps quick and easy to measure the cylinder sleeve height, counter bore depth, top dead center, piston-to-deck height, valve protrusion..
  • 【Precise Measurement】 Range: 0-1.00". Graduation: 0.001". Reading: 0-100. Easy readings around entire bore. 4374- Dial Indicator.
  • 【Perfect Design】 Pointed contact for measuring cylinder sleeve height. Flat end contact measures counter-bore depth. Compact and versatile gauge also measures top dead center, piston-to-deck height and valve protrusion. Easy to use, impossible to mess up..
  • 【Built to Last】 Made of real steel hardened, professional and quality. Heavier, stronger and more durable. Not so easy to be deformed, more shock-proof, professional quality and industrial use..
  • 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty..
Check Stock

Fowler 52-646-300-0 Cylinder Dial Bore Gage with 6 Measuring Range

  • ACCURATE MEASUREMENTS: This Bore Gage Features A Dial Indicator With A Graduations Of 0.0005" And A Measuring Depth Of 9.5".
  • EXTENDED RANGE: This 2-6" Bore Gage, With A Two-Point Contact System, Is Used For Measuring Hole Diameters And To Detect Geometry Abnormalities. The Carbide-Tipped Anvil Contact Points Provide Extended Wear & Improved Abrasion Resistance.
  • SELF-CENTERING: The Easily Adjustable Bore Gage Is Self-Centering For Fast And Accurate Measurements.
  • USER-FRIENDLY: The Insulated Grip Allows For easier measuring and is easily adjustable.
  • SET INCLUDES: This bore gages comes with a protective fitted case and 2 Inch extension.
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

1/2 Shank 9 Pcs Boring Bar Set Carbide Tipped Bars

  • 3pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3"), 3pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), 3pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
Check Stock

Fowler 52-646-400-0 Extender Dial Bore Gage Kit with 1.4-6 Measuring Range

  • ACCURATE MEASUREMENTS: This bore gage features a dial indicator with a graduations of 0.0005" and a measuring depth of 9.5".
  • EXTENDED RANGE: This 1.4-6" range bore gage, with a two-point contact system, is used for measuring hole diameters and also to detect geometry abnormalities such as ovality and taper.
  • carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
  • SELF CENTERING: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
  • EASY AND EFFICIENT: This bore gage comes with an insulated grip and a chrome plated handle for easy use..
  • SET INCLUDES: Set comes with two self-centering measuring heads, an extension holder, spacers, and a fitted case.
Check Stock

Fower 52-646-220-0, X-Tender Metric Dial Bore Gage with 35-160mm Measuring Range

  • Accurate Measurements: This bore gage features a dial indicator with graduations of 0.01mm and a measuring depth of 9.5".
  • Extended Range: This bore gage with a two-point contact system is used for measuring hole diameters and to detect geometry abnormalities such as ovality and taper.
  • carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
  • Set Includes: A bore gage with an insulated grip, two measuring feet ranging 35-50mm and 50-160mm respectively, 16 interchangeable anvils, spacers for fine adjustment of the range, a 55mm extension holder, and a fitted case.
  • Self Centering: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
  • Requires standards for setting nominal sizes (not supplied).
Check Stock

Isky Racing Cams 100-GRM Groove-O-Matic Engine Block Ringing Tool

  • Pilots in the cylinder bore & is easily adjustable for bore diameter and depth of cut for the copper 0-ring groove.
  • Fast and profitable way to "0-Ring" the cylinder block face.
Check Stock