Reviews Adjustable Clamping Systems

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

Upgraded Angle Grinder Stand Universal Fixed Grinder Holder Sliding Handle Bracket Adjustable 45 Degree Clamp with Protective Cover

  • UNIVERSAL ANGLE GRINDER STAND - Upgraded holder clamp for angle grinders within 150 mm / 5.9 in. Adjustable fixing arm for multiple types of angle grinders..
  • ADJUSTABLE CLAMPING MATERIAL ANGLE & WIDTH - The vise at the base allows flexible clamping adjustment. The maximum clamping angle can reach 45 degrees with a clamping width of 80 mm. And it holds a max 150 mm (5.9 in) width in 0 degrees..
  • USER-FRIENDLY - Just press and hold the yellow button and gently pull or push the screw rod to adjust the clamping range. Tough spring has sufficient elastic force to return quickly and does not deform after stretching..
  • SMOOTH SLIDING & ACCURATE CUTTING - the smooth sliding rail provides smooth sliding and a max 150 mm (5.9 in) cutting length. The extended non-slip handle offers a comfortable cutting experience. Fine-tuning knob and locking fixture at the vise are designed for more stable cutting. Non-slip silicone fixed shaft for more stable angle grinder holding..
  • SAFE - Extended holding handle keep your hands away from the cutting area of the saw-blade. The large and thick protective cover can effectively protect your hand and refrain iron chips and wood chips from flying..
Check Stock

Pyatofyy 4 Pack T-Track Clamp, T Track Hold Down Clamps Kit Compatible with 3018-,3018-PROVer,1810- CNC Router Machine

  • Adjustable 3 gears, high, medium and low, different clamping force suitable for different working condition..
  • Constructed of high quality aluminum alloy and stainless steel provides the hold fast clamps with maximum durability and strength..
  • Maximum clamping is 60mm, the clamping height can be adjusted according to the thickness of the board..
  • Quick and easy clamping,slide the bench hold down clamp into your workbench dog hole, hold wood in place and then press the gear,easier clamping,reduce hand fatique.
  • Use with your workbench,works best on workbenches 20~40mm thickness(maximum clamping 60mm),Drill a suitable vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole..
Check Stock

Condensing Tube Tongs, Adjustable Tong Opening Multi-Functional Four-Claw Universal Beaker Clamp

  • STRONG CLAMPING FORCE---The condensing tube holder has strong clamping force, which can makes sure that the experiment supplies held by the clamp will not fall..
  • FOUR CLAW DESIGN---The beaker clamp is designed to four claw type, which is to strengthen its steady..
  • FLEXIBLE HANDLE---The handle can rotate 360 degree, which allows for pouring the chemical solutions easily..
  • ADJUSTABLE TONG OPENING---The beaker clip features adjustable tong opening, and can fit different specifications of the lab instrument..
  • APPLICATION---The universal condensing tube holder is suitable for clamping various lab supplies such as condenser pipe, flask, etc..
Check Stock

Tripod Clamp Mount, Lab Stand Holder Cross Clip, for Experiment Laboratory

  • ADJUSTABLE TONG OPENING: Because of flexible tong opening, the condensing tube clamp can be used in different specifications of the lab instrument..
  • STRONG CLAMPING FORCE: The four-claw lab clamp features strong clamping force, which makes sure that the experiment supplies held by the clamp will not fall..
  • FLEXIBLE HANDLE: The handle can rotate 360 degree, which allows for pouring the chemical solutions easily..
  • FOUR CLAW DESIGN: The beaker clamp adopts four-claw design, which improves its clamping force..
  • APPLICATION: The condensing tube clamp is suitable for clamping various lab supplies such as condenser pipe, flask, etc..
Check Stock

Proster 200pcs Ear Clamps Stainless Steel Hose Clamp Clip 5.8-7mm, 7.3-9mm, 8.8-10.5mm, 9.6-11.3mm, 10.8-13.3mm, 12-14.5mm, 13.5-16.2mm, 14.5-17mm, 16-19.2mm, 17.8-21.0mm

  • Corrosion resistance: High precision single ear stepless hose clamp 304 stainless steel, corrosion resistant, will not rust for long-term use..
  • Increased clamping force: Hose clamps for sealing various types of hoses. Pliers increase clamping force and are designed for repairing pipes and piping systems..
  • Smooth edge polishing: The cochlear design ensures continuous clamping during temperature changes or machine vibrations, smooth edges and avoids damage to the hose..
  • 360° stepless design: Bandwidth is 7mm, thickness is 0.6mm. The internal narrow band design has no protrusions and gaps, providing a more concentrated sealing pressure..
  • Quick and easy, visualize installation effect, special edging technology to avoid damage to the pipe and ensure safety. Suitable for indoor hot water pipes, air conditioning pipes, petrochemical pipelines, etc..
Check Stock

Annsm Matte Box for 15mm Standard Rail Rods for Canon Sony Panasonic Nikon Fujifilm Olympus Cameras Camcorder Lenses Diameter Less Than 85mm with Height Adjustable for Different Camera Lenses

  • Made of high quality ABS plastics with metal matt surface finished, it is strong and durable..
  • Flexible clamping design on French flags, easy installation / dis-assembly and angle adjustable for different environment..
  • It mounts on the international standard 15mm rail rods support systems. The distance of two Rail rods center is 60mm.
  • The height of the Matte box could be adjustable up and down to meet different size cameras and lenses..
  • It is designed compatible with most of DSLR camera such as Canon 60D 5DII 1D3 D90 550D/T2i 600D/T3i 650/T4i 7D Nikon D3100 D7000 D700 Sony A6300 A6500 Panasonic Lumix GH3 GH4 GH5. It fits the lenses which the diameter is less than 85mm.
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • ...mance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..
Check Stock

GAMMA Progression II 602 FC 360 Degree Rotation Tabletop Racquet Stringer Machines with Accessories/Racket String Tools - Strings Racquetball, Squash, Tennis or Badminton Rackets

  • Calibrated tension: manual spring tension winder (9 to 90 lbs. / 4 to 41 kegs) with patented rotational string guide.
  • Secure grip: diamond coated Linear string gripper.
  • Multiple mounting Systems available: 6-pt self centering quick mount+, 6-pt quick mount+ or 2-pt self centering all with universal string clamps providing clamping pressure for badminton and tennis, with teeth spacing optimized for all Racquet types.
  • Ease of Use: Quick action rotating swivel string clamp bases lock securely to the 360-degree rotating turntable quickly and easily.
  • Great extras: large tool Tray, Height adjustable from 36” to 48”, and tools (pathfinder awl, Straight awl, Hex wrench set, straight pliers, bent pliers, Diagonal cutting pliers, Cleaning stone & Starting clamp) - custom Cover available separately.
Check Stock

Upgrade Version Angle Grinder Fixed Universal Bracket Polishing Machine Conversion Cutting Machine Table Saw Multifunctional Desktop Pull Rod Angle Grinding Machine Stand for 100 and 125 Angle Grinder

  • Clamping width quick adjustment button design, press to adjust the clamping width quickly, easier to use..
  • Adjustable fixed arm for multiple angle grinders..
  • Thick protective cover, large size design can effectively refrain iron chips and wood chips from flying..
  • The maximum clamping angle of the clamp can reach 45 degrees, the maximum clamping is 80mm..
  • Non-slip silicone fixed shaft for more accurate positioning..
Check Stock